Watch Before You Change Husqvarna Drive Belt! - Tractor Transmission Belt Slipping Problem SOLVED!
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Watch Before You Change Husqvarna Drive Belt! - Yard Tractor Drive Belt Slipping Solved. In this video I show you what I found right before I was going to install a new drive belt, it turns out that was not the problem at all.
WATCH NEXT!
Husqvarna Drive Idler Pulley Replacement: • Husqvarna Drive Pulley...
Husqvarna Air Filter Change: • Husqvarna Riding Lawn ...
Husqvarna Spark Plug Change: • Riding Lawn Mower Spar...
Husqvarna Ignition Key Switch Replacement: • How to Replace Ignitio...
Husqvarna Oil Change: • Husqvarna Riding Lawn ...
Camera Used: amzn.to/2zDEXyZ
Tripod: amzn.to/2W6whZp
Microphone: amzn.to/2VHO767
Amazon Affiliate Links
Thanks!
Thank you very much! I appreciate the support! Thank you for watching!
My Husqvarna developed a screeching, near deafening loud sounds that I could sometimes lessen by gently touching the brake pedal. I recorded the horrible sounds, went to and played it for my long time local mower/equipment shop guy. He said “could be this, could be that, it’ll take about a week or more to pull it all apart and get it back to you for a couple hundred but possibly more depending on what I find. I’m retired with a failing fixed income with an ever present subtle fear losing our home of 40 years in the not too distant years. I watched your post, cleaned out the compressed grass and presto, the horrible chattering sound has disappeared. I’m one very, very, very happy old guy. I’ll always look to you first for insights from now on. Thanks for what you bring to our world and I’ll share you freely with all. Butch McGuire at 81.
I’m glad you found the video helpful! When I am doing DIY type things I usually have my camera going because it’s not that much harder to film the process. That way someone else can save a little bit of time or money by doing it themselves! Thank you for watching!
If you'll use air hose to blow all the clippings off after every use, including raising the hood, and blowing fan, battery area. Down beside the rear of engine you'll find two openings, one at each corner, there is a round hole, this is the area where you cleaned out. Use air hose to blow down each opening couple times, alternating back and forth, this will prevent that from happening.
Also try not to wash mower deck when it's just finished mowing, because this tends to kill the bearings in your idler pulleys' and spindles. Even if you wash it after it's cooled down, be sure to run it for few minutes to dry water off everything, are use air hose attachment to blow all pulleys and spindles off. Otherwise water sets on them, and will seep into sealed bearings washing grease out prematurely.
These few things is what I've learned over the years, from my own mistakes in thinking I was doing the best I could to maintain my mowers. Only to figure out that I was doing more harm, by doing the things I was doing.
Also on bigger decks, I add another wash attachment connection to the opposite side than the factory installed one, and this makes sure that entire under deck area is washed free of built up clippings.
Hope this helps you, out, by learning from mistakes, and I made, and learning how to correctly do things, saving lots of headaches, and money needed other places .
Yes !! I use my leaf blower, or my compressor with an extension on my air nozzle, it's about 16" long and does a GREAT job of keeping everything clean. It's much better for the machine for obvious reasons too ! I wash my tractor regularly just like I wash the cars and truck, I blow dry them too. Well worth the time ! Only takes a few minutes but makes a big difference, especially if/when I do have to work on it !
Hey everybody! Thank you for watching my video(s)! If you found this video helpful please give it a THUMBS UP 👍 and consider subscribing! THANK YOU! I appreciate all the support!
SUBSCRIBE HERE ▶︎ th-cam.com/channels/8BzgKWkH0AGzCOORKK7Vwg.html
WATCH NEXT!
Husqvarna Drive Idler Pulley Replacement: th-cam.com/video/-_VHJJ-ZsY0/w-d-xo.html
Husqvarna Air Filter Change: th-cam.com/video/7V0l5AOufPM/w-d-xo.html
Husqvarna Spark Plug Change: th-cam.com/video/N_xXki87ubE/w-d-xo.html
Husqvarna Ignition Key Switch Replacement: th-cam.com/video/THFaPHzqzyM/w-d-xo.html
Husqvarna Oil Change: th-cam.com/video/HrDGu1E0nRQ/w-d-xo.html
Thank you for Sharing and Helping 👍👍
@@Honestandtruth007 thank you for watching, I’m glad it was helpful!
Thanks for making this, I kept losing power while I was driving mine and it almost seemed like the belt was slipping because it would just slowly pick up speed. I just did this, instant acceleration again. Thanks!
I’m glad it worked for you! It’s amazing how much clippings get stuck up there! Thank you for watching, please give the video a thumbs up if you found it helpful! Thanks again.
Thanks for helping me save my family a few thousand dollars... I feel like I owe you something. A like? Sure. A comment? That too! A subscription? No comment 😬
I’ll take all three! Lol Really any of those are great, I’m just glad I can save people some money and frustration! I’m glad it was helpful! Check out my other husqvarna maintenance videos if you are interested! Thank you for watching!
Finally!! Thanks for the video. I have been trying to figure this out for a while now. I had just enough power each time to cut the grass but it was a struggle. I have tried a lot of stuff and was getting ready to change the drive belt when I found this video. 5 mins of cleaning and I was back up and running like it was new!
Hey buddy...I owe you a beer, or maybe a whole case! I was about ready to put my mower up on a trailer and tow it to a repair shop half an hour away. Problem solved in 5 minutes. BTW, if you lower the mower deck to the lowest position, you don't need to remove it. Also, sticking a long screwdriver down thru those 2 cleanout holes in the frame will enable you to dislodge most of the impacted grass.
That’s great! I’m glad you found the video and were able to fix it before you brought it to the shop! That’s for the offer of the beer! I appreciate it, I’ll take a thumbs up on the video in place of the offer! Also thanks for the extra tips on on the clean out holes! Cheers!
Thank you VERY MUCH. Common sense fix that I didn't have enough sense to figure out. Back in action in just a couple of minutes. Brief & straight to the point. Many thanks.
That’s great! Glad you were able to get back to it so quickly! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Thank You a lot !!! You saved me some money and an hour of work. Greetings from Poland 🍺🍺🍺
I’m glad you found it helpful! Thanks for watching! Cheers!
Genius!
Dude, you're my hero. Thanks for this simple but powerful tip. My tractor is back to running normal.
I’m glad it was helpful! Such a great feeling when you hit that pedal and it moves like it should! Please consider giving the video a thumbs up if you haven’t already! Thanks for watching!
Thanks. This fixing my problem!!!
Was just about to change belt and saw your video, thanks, it worked like a charm. It saved me money and time!
Randy Rust glad I could save you a little of both! Thank you for watching! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Mine makes noises in the transmission when I’m backing up like something was grinding or slipping or something. I don’t think it’s a belt. It sounds kinda like a clutch or something slipping and grinding. I don’t know what it is can’t get nobody to answer me. And it is a 2011 Husqvarna. YTA 18542
This solved my problem. I had lost both forward and reverse. I removed the mower blade housing for better access to the nooks and crannies then used my air compressor to blow debris out. To my surprise forward and reverse worked great. Easy and zero cost.
That's great! I'm glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!
Holy Butts. I can't say for sure this is my issue, but there is for SURE a LOAD of crap underneath I need to clean out, that can't be doing any good.
I've always only ridden other peoples lawn tractor. Just like people never think about checking fluids on a car til the first component fails- I'd never think to clear the grass off the mower til I have to maintain my own. Thanks!
Sounds like Joe Friday describing crime scene on Dragnet.
I am surprised that more haven’t been posted about this issue. I was about ready to buy a new mower. I used an air compressor with a long tip. This allowed me to bust up the clumped grass and blow it clean. Thank You!
Replaced the belts and still wouldn’t climb the slightest incline, was getting ready to take the transaxle out and replace the fluid, but I found your video and behold I removed a huge chunk of hardened grass clippings thanks to your help and now it flys up the steepest of hills!
Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
these huskys are junk! , plastic pulleys, mine throws the belt every second use, reverse doesnt work up the smallest incline. I noticed my neibour under his mower yesterday obviously tossed a belt too. to fix a tossed drive belt you have to remove seat and gas tank which is a beach . grind away some metal to make it easier to remove the gas tank. Stupid design,cheap plastic parts,dont waste your hard earned money on these.
Treat the machine properly, you avoid these problems. A proper compressed air cleaning after each mow ought to do the trick. I'd also imagine this accumulation would occur from cutting wet or moist grass.
Can you imagine how many folks trashed their mowers because "the transmission is going or has gone bad" ? I imagine many.
Thanks, for the well done video. My sears PYT9000 is very similar, with the same symptoms. An extensive cleaning did the trick!
So I've done this and still have the same problem pulleys and wheels are all good but no power and won't back up belt is still moving but no power
I just used my battery “grass” blower to blast out the deck…I never do…makes it easy…
Brilliant!! I've had it serviced twice this problem and though I'd finally replace the belts. When looking how to install found this video. I just loosened the grass and vacuumed it out. Worked a treat!!!
Can always fix myself now, thanks
I’m glad you found the video and were able to get it fixed! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Is so hard to me , installing this belt , maybe is not the correct belt
I would double check that the one you have is the correct one.
We always clean under own deck everytime we cut our yard with our water hose
But to each his own
Using a blower or air hose on the mower after cutting helps a lot.
This would have to be one of the most useful posts on TH-cam. Have used it successfully several times over the life of this old yard tractor. Many thanks for your friends from down under. Cheers
Thanks! I truly appreciate it and I’m glad it was helpful more than once! Thank you for watching and also check out my other mower maintenance videos if you are interested! Kind of amazing that the video has reached around the world from her in the northeastern U.S.
I always use my leaf blower in my mower before putting it away, so it seemed unlikely that there would be any build up of clippings anywhere. Wrong! When I had the deck off I checked the area shown here and it was packed with debris, enough so it took me awhile to fish it out. Even though I had a new belt ready to install, I didn't need it. Now there is no slipping on hills. Thanks for the explanation and good video!
Dan Webster thank you for watching! Glad the video and explanation was helpful to you, please consider giving the video a thumbs up if you haven’t already! Thanks again!
Mine still won't go. It was moving good then stopped. Like it wants to move but don't.
You may have a more in depth problem with the transmission, does the belt have tension when the brake is off? Check this with the mower not running of course.
mine did they same thing. That is just a horrible design.
THANK YOU!!! I actually pulled the transaxle and changed the oil in my Husqvarna lawn tractor because I was having the same issue and some posts said maybe the transaxle was low on oil or the oil had broken down. Well... it was a little low on oil so I took care of that with the new oil, but after I reassembled everything, the "go" was no better. Then I found your video and Ah Ha! I had the same issue with the clump of dirt and grass keeping the belt from tightening. 30 seconds later my mower drives like new. Thanks for taking the time to post this!
Paul Ortmann thank you for watching, I’m glad the video was helpful. It’s amazing how much a small clump of grass can screw it up! Please consider giving the video a thumbs up if you haven’t already! Thanks again and glad that you fixed it!
Hi! What if the belt is still loose after cleaning?? It there a way to get more tension?
I just use the leaf blower on the mower after each use.
Thank u for this.. my brake clutch spring broke..I didn’t know where it attaches to the frame..I can see it in this video
I’m glad it was helpful! Thank you for watching!
I love Germans.
I think you just solved my problem!!!! Thank you so much :)
That’s great, I’m glad the video helped! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Worked, crazy that 1/4 inch if packed grass wouldn't let me reverse.
I agree!
Thanks for this video.
Thanks that saved the day!
I took the deck off and used compressed air to clean the machine first (but I didn't clean that one area!). I mulch the leaves,big area, then bag the leaves second. We have 4 small dogs so it's a clean yard or you can't find the poops and keep leaves from being brought inside on their feet.
This was the exact problem with mine! Saved me time and money. Thank you!
Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Thanks so much
Fixed my mower right up
Thank you for watching, I’m glad the video was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Glad I watched your video before I tried to change the drive belt, mine was clogged up really bad. Dropped the deck, cleaned it out and problem fixed. Thanks
Mine slips going foward but pulls fine in reverse.
I'll try this too.
Thank you for watching! Did you have any luck?
Was just about to give up on my lgt2654, cause no matter what I do the belt slips so easily. Didn't know about this so I'm going to check it out tomorrow. Thx!
Did this remedy the problem, I hope so!
@@5MinuteFixit I believe so though it was on a different model there was some build up under that panel where the brake bar sits. So far havent had the belt come off so thank you!
Helped thanks.
Thanks, I'll definitely check my Poulan Pro 500EX for that as right now the transmission slips on hills or towing a dethatcher and I've been using a gummi strap to hold my brake pedal all the way up ever since last year when I changed the noisy tensioner pulley :) If it turns out to be the belts though, I already have new ones here I ordered from Amazon last week and it could very well be both as the belts on it are the originals from when I bought my mower 11 years ago.
Did you need to elevate the front end to access that area?
Elevating it definitely makes it easier, you may be able to get to the area without. Report back how it goes so others can be helped by your comment.
something I never thought to check ,thanks
Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Good info, my drive was slipping on my gth2654. I had over 100 hours on my belt, I mow about 4 acres of rough terrain and often high grass/weeds. So it seems my belt just got stretched. I sprayed some belt dressing I bought at the auto parts store...problem solved.
The fact that the break not fully being released can cause th mower not to engage need to be in the "Tips and Faults" section of the manual.
You bring up a good point, I agree this should be addressed in the manual. Thank you for watching!
This clip solved a problem I've been facing for years. Thank you from Wisconsin!
Curtis Johnson glad you found it helpful! Please consider giving the video a thumbs up if you haven’t already! Thanks for watching!
When I have my leaf blower out blowing off the driveway and walkway, I always blow off any grass/debris from my mower, it doesn't get it all but it gets 90% of it.
Hmmm mine did this today. Stinking hot outside. Oh well gotta go look lawn won’t mow itself.
Did you have any luck with your mower? Was this the issue?
And this is why regular maintenance on anything from a mower to a car is critical.
Sweet… just did exactly the same.. Thanks..
I’m glad you were able to fix the problem with the help of the video! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Dude! Johnny Muskego lawn and pool thanks you...
That’s great! I’m glad the video was helpful, please consider giving it a thumbs up if you haven’t already! Thank you!
👍❤️🇮🇪
Great video thank you!!
Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
I just ordered a new drive belt 3 days ago and then I saw this a few minutes ago... Went and checked and found TONS of grass in there!
We'll see if that does the trick the next mow. My yth22v46 is 10 years old, so it may still need a new belt, but this video is great!!
🍻
Hopefully its just the grass buildup that’s causing the issue! If so at least you have a spare belt for when you need it! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Thanks, this saved me a lot of time and $$$!
That’s great, I’m glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Thank You so very much, that did the trick.
Matt G thank you for watching glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Thanks for explaining its something I can try on my own mower.
I clean mine out after every time I mow with it with a leaf blower but my old drive belts cracked up
You just saved my day! Thank you!!🙏
Happy to help!
This actually made some since thx
Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
I just purchased a Husqvarna 138 CT riding mower. The brake both stops the tractor and engages the hydrostatic drive. Two issues: First trying to accelerate [from stop] is jerky and like riding a bronco! Pressing the brake abruptly stops the tractor with excessive force. Driving is terrible; jerking onto motions and lurching to a stop! Second issue is the excessively loud [squealing] sound the belt makes; engaging the drive! Now I have a new tractor that squeaks. bucks and jumps, all for the neighbors to enjoy! Is belting dressing an opinion? Can the belt tension be adjusted to smooth acceleration and reduce squeal?
I would shy away from belt dressing, from my understanding that should be used when a belt is under constant tension and still slipping. I think the jerky acceleration will slightly soften over time but I have to say even with ~260ish hours on my rider it’s still slightly jerky. Hopefully this helps! Thank you for watching the video and please consider giving the video a thumbs up if you haven’t already! Thank you!
Awesome video thank you, I had a ton more than you did lol
Exactly what my problem was
Thank you for watching! I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Great fix! It worked perfectly for me after I found the earlier video by herbcrosby with the same solution. See my comments there if interested,.
Thought my belt was going, I always blow the mower/deck off when done. Exact same problem, never saw it and it was just like yours. Glad I found your video, and thanks for making it.
Thank you for watching! I’m glad the video was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Thank God for you brother, you just saved me at least $200!!! (Round trip transport $95 to repair shop, $100 per hour service. Also, they were not going to get to it for another week. I have 4in of leaves covering 2 acres of my grass between trees. 👍👍👍
Thanks for watching, I’m glad the video was able to save you some $, please consider giving the video a thumbs up if you haven’t already! Thank you!
OH MY GOODNESS! After watching 8 TH-cam's on how to change the belt 😱😵💫😱😥 I gave TH-cam one more chance and found YOU! I didn't think it would work but I gave it a shot. Lot's of grass and 10 minutes later it WORKED!!! THANK YOU THANK YOU THANK YOU! 😘
That’s great I’m glad it worked and you didn’t have to go through the trouble of changing the belt! Thank you for watching the video and please consider giving it a 👍🏻 if you haven’t already! Thank you!
Man I was about to throw my husq away. 400 hours on this bad boy. 2010 20/42 and it cuts 2 acres weekly. Rebuilt the transmission put a new drive belt on and it ran great. Fast forward 2 months and it doesn’t move again. Jacked it up and saw the drive belt has no tension when the brake is off. Damn it’s a new belt! Checked out your vid and I had to e exact problem major build up of grass. Hard grass clumps. Chipped it all away with a large flat blade and damn if this beast doesn’t now drive like the first day I bought it! Awesome man thanks a lot.
That’s great! I’m glad you found the video and it helped you out! I love it when it’s an easy fix! Thanks for watching and also check out my other mower maintenance videos if you are interested! Thanks again!
This worked for my Husqvarna-built Craftsman yt4000 - thank you for sharing this!
Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
Thats why my mowers get complete wash when done mowing
Bought a YTH22v42 with a supposed bad transmission got it home messed with it for a few then realized it had a huge amount of grass like yours did after I cleaned it out it’s been the best and cheapest mower I’ve had
That’s awesome, nothing better than a cheap find that treats you well and saves a bunch of money! Thank you for watching!
Can't say thank you enough. This was a life saver. My mower was only 4 months old and thought I was going to have to fight to have warranty work done. Thank goodness it was just grass accumulation.
jow popper that’s great, glad you found it helpful and that you didn’t have to go through with a warranty fight! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thanks again!
@@5MinuteFixit I have a 4-year-old Husqvarna YTA22V46 lawn tractor that has given me nothing but fits, especially with the so-called "automatic" transmission. These tractors are poorly designed and lots of debris accumulates in the back of the mower where the pullies for the drive belt and transmission belt are located. To clean, you need to remove the battery and clean with either a hose or compressed air. The tractor is supposed to have a top-end speed of 7.5 mph, but I've been on it when the tractor could only go about 2 mph and would have trouble making it up a slight grade. I'm very disappointed in this lawn tractor and will most likely sell it after this cutting season and buy something else.
Thank you so much!! I was thinking it was the belt and was going to order a new belt but your video led me to check this and it fixed my problem...thank you!
I'm glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!
BRIILIANT video that just saved me a huge amount of work changing the drive belt... for nothing. Thank you thank you!!!
Thank you for watching, I'm glad it was helpful! Please consider giving the video a thumbs up if you haven't already! Thank you!
Just replaced drive belt and tractor wouldn’t move.
Watched your video and knew I had a clump of dried grass exactly where you showed.
Cleaned it all out (at least an inch thick), runs great now.
This is my neighbor’s tractor and no maintenance done whatsoever.
Thanks
I’m glad it was an easy fix and you didn’t have to replace the transmission or mower! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
What the heck are the thumbs down for? Fixed my mower... especially the parking brake tip.
I’m glad you found it helpful and thanks for the thumbs up! I appreciate it! Thank you for watching!
My mower is a 2009 Craftsman and l have had this exact same issue, finally figured it out a couple years ago. Drove me crazy till I figured it out. Good video.
I’m glad you found it helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Thank you!, thank you!, thank you! This was driving me nuts. Even though I was sure the belt and pullies were okay, I was ready to replace them all, but luckily I came across your video.. Easy free fix and on my regular maintenance schedule now.
I know, fairly simple things like this should be explained in the owners manual. Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!
Thank you so much! Had the same problem on a Craftsman mower made by Husqvarna. Changed the transaxle fluid and filter with no effect. Ordered a drive belt, then came across this video while waiting for it to arrive. I always use a leaf blower to clean the deck and mower after mowing, but had no idea that a clump of grass in could stop the machine from climbing a small hill. With the great editing and knowing exactly where to look, I found the clump of grass causing the problem in seconds and now it climbs like a billy goat. Thanks again!
Thanks for watching I’m glad the video helped you get your mower back to working order! It’s amazing what that a relatively small clump of grass can cause this issue! Thanks again and also for the Super Thanks!
Mrrph! Just finished changing my drive belt. The old belt looked fine, but I did clean out a lot of crap in that area in the process. Thank you!
Thank you for watching! I’m glad it was helpful! Was your belt slipping before? Did cleaning the area help the issue?
I think it’s annoying that the owner manual doesn’t guide you to this issue. I found out the hard way, new belt and idlers. It is a hard spot to get right into and I think that the manufacturers need to set up a solution in new models. Using a long nose air blower seems a good idea that I Haven’t tried, so thanks for the tip. I may make an adapted tool for this to really get into the tight places. Great vid, thanks
I also think they could have done a better design so this could have been avoided in the first place. Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Thank you. Saw this video, lowered the deck, cleaned out the clump of grass, mower doing great.
Thank you for watching, I'm glad it was helpful! Please consider giving the video a thumbs up if you haven't already! Thank You!
While I was under my mower looking to see how the belt was run,, I saw the debris and cleared it out, had no idea that was the problem. Thankfully I saw your video before I began to make the repair. Reattached the deck and thing ran like a champ. Thanks for the video. Saved me a lot of work.
I’m glad it was helpful, thank you for watching! Please consider giving the video a thumbs up if you haven’t already! Thank you!
This was exactly my problem. I blow off my mower with the leaf blower after every use, but this spot on the tractor still had buildup. Thank you!
I’m glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
You are the MAN! You saved me a ton of money from buying a new transmission! THANK YOU!
I’m glad it was helpful and you were able to save money by not buying a new transmission! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
This is just one reason I take my leaf blower to the mower when I'm done.
That will definitely help! Thank you for watching!
Thanks for the added check for my list...I'm going underneath today, wish me luck!
How’d it go, did you find anything? Thanks for watching!
Thank you for this video! Saved me all sortsa time!!!
That’s great! I’m glad it was helpful, be sure to check out my other mower maintenance videos if you are interested! Thank you!
Mind blowing! You saving people a lot of money and time, thank you so much for sharing it! You got my like! 👍
Thank you for watching! I’m glad it was helpful!
Thank you for sharing this video. This is the exact problem I've got on my McCulloch
I’m glad it was helpful! Thank you for watching!
Thank you very much, this fixed my problem and taught me what to look out for in the future!
Thank you for watching, I'm glad it was helpful and fixed the issue! Please consider giving the video a thumbs up if you haven't already! Thank you!
THANK YOU !!!
Thank you for watching, I'm glad it was helpful! Please consider giving the video a thumbs up if you haven't already! Thank you!