Thank you sooooooooooooooooo much for this video, especially the tip we’re you said if the bobbin is not moving we should adjust the little metal, wow 😮 I did that and it worked, I have been fighting my sewing Techsew 810 for 2 hours trying to get this going! Thank you thank you thank you thank you🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 May God continue to bless you for this! Subscribed💯
Just got my Consew 206 last week, I've been painstakingly going through each adjustment and setup piece, I thought I was winding a bobbin right until I watched this, now even that part of my setup is working well. Sweet!
I got this machine yesterday and have had so many specific questions that only your videos have been able to answer. Thank you so much for all your videos on this machine!
Thank you! On my fourth bobbin winding video for my new to me vintage 20U trying to find a fix.The problem was the bobbin spinning on the stem. Such a simple fix.
😂 I guess that’s one way. My pop showed me another way. I put the bobbin on the axil first, then I run the thread around the spool five times and then pull as your engaging the belt. It automatically binds after it locks into place. Then I snip the tail and go to town. I’ve been borrowing an old grey cast RB from a buddy and it’s almost time to give it back. This is my next one. I bought that Juki 1541S and boy was that a mistake! The foot has a nice high lift factor but it’s too easy to go out of time. When it worked, it worked well but that was only some of the time. Juki’s old grey cast DNU machines were awesome. These new ones suck. Consew seems to be so much more dependable in the long run. You can’t go wrong. The kick out clutch always works and the reverse engages a lot smoother. Beware of the new Juki’s! There’s a lot of those new ones for sale on the net. They’re still new and for resale. ..lol.. 😂
You're welcome. The needle will still go up and down while you're doing the bobbin. You can fill a bobbin and sew at the same time. I did a video on that too. Thanks for watching and commenting.
Would like to see video made on how to set up a brand new 206RB-5 machine,,not the table but the machine itself,,adding all the guards, wheels etc,,have not found a single video of that,,lots of threading the machine etc Thanks
quick question, is there a way to disconnect the belt to move the actual machine while loading a bobbin or do you have to have the machine connected, meaning the needle goes up and down while loading a bobbin?
@@66Gordo yes I understand that, I guess you didnt understand my question, on my home machine, when you load a bobbin, you can "disconnect" the actual machine from spinning, etc, and only drive the bobbin ? I already found out this is not possible,
If you need a bobbin wound up. You just thread the bobbin wheel side as you would normally. Click the little lever down and you can sew at the same time
There are some screws you can loosen and move the mechanism to see if that helps. One of my machines i gently help guide the thread go from one side of the bobbin to the other side. Cause that machine just wants to wind on one side of the bobbin. Hope that helps.
Did you try looking at the manual that came with your machine? There is a video on someone has on TH-cam called "maintain your tension assembly" you can check out and see if that helps
@@66Gordo Hello again I set my machine up over the weekend, I noticed it is very stiff even after oiling, I removed the bobbin and thread and turning the hand wheel it seems to be "sticking" when the takeup arm is at the halfway point Do you have any thoughts I bought the machine with a Servo motor so I can sew slowly , Thanks!
When I back stitch on my rb5 its splitting the top thread and making it fray, split. I have to cut and rethread.. any ideas to the cause of that? the top thread is one size thicker than what I was using. could it be a needle issue?.
@@daytonpyro I asked the guy I bought my sewing machine from and he said it's possible your needle bar is to high or to low. Or the hook is to far from the needle.
Thank you for very clear instructions. Peace 🌸
You're welcome. Glad it helped. Thanks for watching and commenting
Thank you sooooooooooooooooo much for this video, especially the tip we’re you said if the bobbin is not moving we should adjust the little metal,
wow 😮 I did that and it worked, I have been fighting my sewing Techsew 810 for 2 hours trying to get this going! Thank you thank you thank you thank you🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
May God continue to bless you for this!
Subscribed💯
Good. I'm glad I could help you out. I appreciate you watching, commenting, and supporting my channel
I know you posted these videos years ago but I just got one of these and your videos are really helpful. Thanks a lot for posting!
Good glad they helped you out. If you got any questions let me know.
Just got my Consew 206 last week, I've been painstakingly going through each adjustment and setup piece, I thought I was winding a bobbin right until I watched this, now even that part of my setup is working well. Sweet!
Cool. That's good. Let me know if you need anything
I got this machine yesterday and have had so many specific questions that only your videos have been able to answer. Thank you so much for all your videos on this machine!
Cool. thanks for watching. Let me know if you have any other questions. I'll try to help
Just bought a 206rb5 today this was a big help
Good deal. The manual doesn't really explain or help much. Thanks for watching and commenting
Thank you for the easiest bobbin winding tutorial on the consew I’ve seen!!
Definitely. Thanks for watching and the comment
Well done buddy, thanks so much for posting this one.
Yes no problem. Thanks for the comment and view. I appreciate it
Thank you! On my fourth bobbin winding video for my new to me vintage 20U trying to find a fix.The problem was the bobbin spinning on the stem. Such a simple fix.
Good I'm glad it helped. It is a simple fix but frustrating if you don't know. Thanks for watching
😂 I guess that’s one way. My pop showed me another way. I put the bobbin on the axil first, then I run the thread around the spool five times and then pull as your engaging the belt. It automatically binds after it locks into place. Then I snip the tail and go to town. I’ve been borrowing an old grey cast RB from a buddy and it’s almost time to give it back. This is my next one. I bought that Juki 1541S and boy was that a mistake! The foot has a nice high lift factor but it’s too easy to go out of time. When it worked, it worked well but that was only some of the time. Juki’s old grey cast DNU machines were awesome. These new ones suck. Consew seems to be so much more dependable in the long run. You can’t go wrong. The kick out clutch always works and the reverse engages a lot smoother. Beware of the new Juki’s! There’s a lot of those new ones for sale on the net. They’re still new and for resale. ..lol.. 😂
Thanks for the info and watching.
Simple and straight to the point. Thanks!
Thanks. Thanks for watching and commenting
Thank you so much for making this video. Awesome!!!
No problem!! Thanks for watching
This was very helpful
I have a consew 228r-wig
Cool. I'm glad I could help. Thanks for watching, commenting, and supporting my channel.
Thanks. This is an easy tutorial. How do you stop the needle from going up and down while adding thread to bobbin?
You're welcome. The needle will still go up and down while you're doing the bobbin. You can fill a bobbin and sew at the same time. I did a video on that too. Thanks for watching and commenting.
Would like to see video made on how to set up a brand new 206RB-5 machine,,not the table but the machine itself,,adding all the guards, wheels etc,,have not found a single video of that,,lots of threading the machine etc Thanks
Yeah I haven't saw one either. Both my machines were put together from the dealer before I picked them up. I didn't have to set it up.
Thank you! Great tutorial!
You're welcome. Thanks for watching and commenting
Great video, but another question....my needle is still going up and down while the bobbin is winding. How do I prevent this?
Thanks. I made a video that shows you can sew while you wind a bobbin. Thats why the needle will go up and down
Now matter how I adjust the bobbin winder, it is threading uneven on the left side. I have the plate as far over as it will go
Excellent! Thanks.
Yes thanks for watching and the comment
quick question, is there a way to disconnect the belt to move the actual machine while loading a bobbin or do you have to have the machine connected, meaning the needle goes up and down while loading a bobbin?
The belt is what runs it to load the bobbin
@@66Gordo yes I understand that, I guess you didnt understand my question, on my home machine, when you load a bobbin, you can "disconnect" the actual machine from spinning, etc, and only drive the bobbin ? I already found out this is not possible,
Oh ok. I apologize I didn't get it. Yeah I saw some machines do do that. Thanks for watching and commenting. Have a good day
@@66Gordo thanks for the responses
Awesome video!! Thank you buddy.
No problem. Thanks for watching.
Amazing video thank u so much
Thank you for the nice comment
How are you winding the bobbin while you have the machine threaded in the middle of a job?
If you need a bobbin wound up. You just thread the bobbin wheel side as you would normally. Click the little lever down and you can sew at the same time
How do I adjust the bobbin winder if it winds uneven? More on one side.
There are some screws you can loosen and move the mechanism to see if that helps. One of my machines i gently help guide the thread go from one side of the bobbin to the other side. Cause that machine just wants to wind on one side of the bobbin. Hope that helps.
Ya gotta love those extra capacity M bobbins
Yea definitely
Questo attrezzo funziona se lo metto sulla mia Bernina casalinga per trapuntare senza interruzione…?!
How do you change the tension assembly on a 206 or 226 consew straight needle machine
Did you try looking at the manual that came with your machine? There is a video on someone has on TH-cam called "maintain your tension assembly" you can check out and see if that helps
Thanks.
You're welcome. Thanks for watching and commenting
@@66Gordo Hello again I set my machine up over the weekend, I noticed it is very stiff even after oiling, I removed the bobbin and thread and turning the hand wheel it seems to be "sticking" when the takeup arm is at the halfway point Do you have any thoughts I bought the machine with a Servo motor so I can sew slowly , Thanks!
My belt slips off when wind in bobbin. How do I fix
Can you slide the bobbin winder to put more pressure on the belt to tighten it?
When I back stitch on my rb5 its splitting the top thread and making it fray, split. I have to cut and rethread.. any ideas to the cause of that? the top thread is one size thicker than what I was using. could it be a needle issue?.
Yeah you might want to try and change to a different needle see if that helps at all.
I switched to the thinner thread I was using and it still wants to split and fray. seems to do it when I back stitch..
@@daytonpyro I asked the guy I bought my sewing machine from and he said it's possible your needle bar is to high or to low. Or the hook is to far from the needle.