Nice looking saber and good video. Going forward consider putting the music at a lower volume because you're soft spoken. At times the music was louder than you.
Wow, that's a REALLY nice looking saber! A lot of potential here, I wonder if an OLED screen could be modded into one of the panels on either side of the activation button? One of the things I like about the Pach Store is that they routinely update and improve their sabers. Thank you for the look!
This is a good looking saber. And decent features 😮 I'm looking for a dueling saber and this might just fit the bill. Could you do a comparison between this saber and the Darkwolf Lobo?
The Flyte sabers look very good & great value at the price which just goes to show that you can have a lot for a decent price & Asteria seems to have almost all the features of so called higher end boards like Proffie , the clean/functional design of this hilt is great as well as the color scheme just may grab one of these .
You just summed up all my Flyte videos. You are absolutely correct and that's why I endorse flyte sabers. We can have something nice without dropping $500 like some sabers.
Design is pretty plain to me but I definitely like the new features this flyte provides. Also like that the USB charging part is more flush to the chassis unlike the fallen flyte
The fallen flyte was recessed way too much. Needed the special long usb-c cable it came with and small fingers to comfortably access the switch. This one is very user friendly.
If you don't like the music just connect it to your computer, enter the folder with music files and delete the songs you don't want. Save a backup before you make any changes!
Did that have two fastening screws to hold the saber, or one? I saw you only tighten one, but it looked like it had 2. Also, would this be good you think for duels if you put in a base lit blade?
So actually just got mine in the mail yesterday I accidentally Put it in an editing mode yesterday to change the lighting for the blade lengths Which didn't cause any problems but I can't figure out how to get back into that mode any help would be wonderful thank you
This saber is really good. A xeno3 will give you more fonts and customizable options, but the smooth swing and speaker quality on the Mordred is superior to the xeno. The gesture control on a xeno is a bit better.
There aren't a lot of pixel options under $200. Checkout Darkwolf sabers and Crimson Dawn. They have nice LGT sabers with Xeno3 pixel cores around $200.
@@iwinl0l What makes you say that? The flyte sabers usually all have the same in basic configuration package. They only preload 1 or 2 songs which only play with a specific font. You have to load music files for each font in order to play them.
@@GrayPaladin ah I see so only specific fonts have music I'll have to give that a try! Edit: Ok yeah I tried each font and no music, seems this feature was removed.
Yes, they should be. I have used blades from other companies on a Pach Store hilt and they worked. Most of the pogo pin and PCB connector parts are multi compatible.
@@GrayPaladin alright, I'm planning on upgrading one of my hilts to a xenopixel v3, but also just purchased the Mordred based on your video. Your other videos are also very detailed and easy to reference and answer all of my questions. Thanks again!
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
As soon as I saw this saber I fell in love with the design!
Me too
Yes a great looking saber !
Great video! I love the pachstore. Thanks for this how to video.
$139, that’s a very good price for everything it comes with 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Oh yeah, great deal. Pick one up, Mordred by Light 😆
This a nice looking hilt...it would make a great staffing....
It would!
Nice looking saber and good video. Going forward consider putting the music at a lower volume because you're soft spoken. At times the music was louder than you.
Wow, that's a REALLY nice looking saber! A lot of potential here, I wonder if an OLED screen could be modded into one of the panels on either side of the activation button? One of the things I like about the Pach Store is that they routinely update and improve their sabers. Thank you for the look!
If you remove the chassis and board to make it empty I'm sure it could be modded in some way.
Might have to get me one of these, once I clear out my collection a little.
It's a good buy for sure.
This is a good looking saber. And decent features 😮 I'm looking for a dueling saber and this might just fit the bill. Could you do a comparison between this saber and the Darkwolf Lobo?
Speaker doesn't sound half bad, but I'd have to agree about the lockup
Yeah the speaker is good. Better than LGT sabers. My original flyte speaker was a bit better.
certainly a lot of quality features for a budget price.
Really great value
The Flyte sabers look very good & great value at the price which just goes to show that you can have a lot for a decent price & Asteria seems to have almost all the features of so called higher end boards like Proffie , the clean/functional design of this hilt is great as well as the color scheme just may grab one of these .
You just summed up all my Flyte videos. You are absolutely correct and that's why I endorse flyte sabers. We can have something nice without dropping $500 like some sabers.
@@GrayPaladinYes indeed .
Design is pretty plain to me but I definitely like the new features this flyte provides. Also like that the USB charging part is more flush to the chassis unlike the fallen flyte
The fallen flyte was recessed way too much. Needed the special long usb-c cable it came with and small fingers to comfortably access the switch.
This one is very user friendly.
Plain design !? To each their own but it looks very sleek with fine detail while being functional .
Just got mine today and love it, but the manual is bare bones - is it possible to change the music? No Duel of the Fates preinstalled 😢
If you don't like the music just connect it to your computer, enter the folder with music files and delete the songs you don't want.
Save a backup before you make any changes!
Did that have two fastening screws to hold the saber, or one? I saw you only tighten one, but it looked like it had 2. Also, would this be good you think for duels if you put in a base lit blade?
It just has one. Yes this would be good for dueling. It has a 3" blade depth so even with a baselit adapter it should still be sturdy enough.
Not a fan of the blinking power button.
Yeah it looks like the battery is dying or the saber is malfunctioning.
So actually just got mine in the mail yesterday I accidentally Put it in an editing mode yesterday to change the lighting for the blade lengths Which didn't cause any problems but I can't figure out how to get back into that mode any help would be wonderful thank you
If you can't get back into the editor you can adjust it by plugging the USBC cable into a computer and changing the blade length in the config folder.
How would you compare this to a Xeno3 if I were trying to buy my first saber?
This saber is really good. A xeno3 will give you more fonts and customizable options, but the smooth swing and speaker quality on the Mordred is superior to the xeno. The gesture control on a xeno is a bit better.
Is there any neopixel you would recommend under a 200 USD price point than this?
There aren't a lot of pixel options under $200. Checkout Darkwolf sabers and Crimson Dawn. They have nice LGT sabers with Xeno3 pixel cores around $200.
looks like their latest mordred neopixels dont have music
@@iwinl0l What makes you say that?
The flyte sabers usually all have the same in basic configuration package. They only preload 1 or 2 songs which only play with a specific font. You have to load music files for each font in order to play them.
@@GrayPaladin ah I see so only specific fonts have music I'll have to give that a try!
Edit: Ok yeah I tried each font and no music, seems this feature was removed.
@@iwinl0l You have to add the music yourself. The only font that came preloaded with music was the sailor moon font.
@@GrayPaladin do you know how to add music? do I need to create a specific folder under the font? or name the track specifically?
@@iwinl0l Music tracks have to be under the font in a folder. Check the Moon field font for an example.
Would the LEDs inside the hilt be enough to iluminate a regular blade, i'm thinking for dueling?
Or when my cousins come round 🤣
No, it's not enough for a full length blade. You will still see some light, but it won't be bright by any means.
@@GrayPaladin Unfortunate, I just looked and they sell an adapter thing anyway.
In hilt LEDS are very good provided it is a CREE-XP2 with a good lens .
Hi, do you know if the Pach Store pixel blades are compatible with other pixel sabers such as a Xenopixel V3 hilt/ core?
Yes, they should be. I have used blades from other companies on a Pach Store hilt and they worked. Most of the pogo pin and PCB connector parts are multi compatible.
@@GrayPaladin alright, I'm planning on upgrading one of my hilts to a xenopixel v3, but also just purchased the Mordred based on your video. Your other videos are also very detailed and easy to reference and answer all of my questions. Thanks again!
@@austindelosreyes You're welcome. The Xeno3 pixel is a good option too. I have one and like it.
Is the speaker with the pogo pins better than the newer one recessed into the chassis ?
I thought the older version with the pogo pins sounded better, but the new one is still okay.
@@GrayPaladinOh is that right I figured they would be using the Veco 24mm by now .
@@user-gk4jd1jv4k Even so, I've always thought the veco speakers weren't spectacular.
@@GrayPaladinOh really okay I've heard good things about them in terms of loudness/clarity what do you think is better ?
@@GrayPaladinThe speaker GCS uses is apparently one of the best !?