That plate you put a washer on the power valve at 5:40 shouldn’t be tight it needs to have a bit of movement because that spring it sits in acts like a mini shock absorber for when the arm comes up and down.
Indeed, that arm must be loose. I protects the powervalve actuator mechanism in the event the power valve gets stuck. The mechanism will push the spring and not damage itself.
I am currently waiting on my 1999 RM 250 cylinder which is in the mail from Powerseal, getting it replated , cant wait to put it back together. I was really unsure how the powervalve worked. This video was very informative. Thanks for putting out great content.
3:35 it's not so much the area of the exhaust port that the 'power valve' affects but the height of the exhaust port. The higher the top edge of the port the earlier it starts to scavenge the exhaust gas which produces power at higher revs. When the port top edge is lower it produces power at lower revs. 😉
For those who work on the RM power valves be sure to look at the electrical schematic and notice the power valve solenoid. Not all models have the solenoid. If it’s not actuating as it should your bike may not operate at optimum performance levels. As I understand it the solenoid operates like a waste gate.
Really like your videos man. You really go into detail unlike some other youtubers. You do amazing work. On your future projects you must please consider doing a 4 stroke bike
Thanks for another great rebuild vid on this bike. You do an amazing, thorough job and not to mention explain it all so well. Looking forward to the next!
I won a car once in a raffle but didn't read the fine print. To receive the car i had to pay the taxes which i couldn't afford. If i won this bike it'd be the first thing I actually won and would receive lol. I had to sell my bikes cause the covid.
Thanks man helpful video. Just dropped my cylinder off today to get fixed. Now we play the waiting game to get it back and back together haha 2000 rm 250. Thanx
Your channel is inspiring builds 🤙 hey quick question . If I can't find a reputable company locally to bore my cylinder on the 97' CR125 build I'm doing, Is there one you would recommend I can mail my cylinder to ? Bore or resleeve idk what's cheaper ?
You are a great youtuber Cam keep up the amazing work!! Your RM250 build videos have been very helpful to me as I am rebuilding the same bike just a year older, it is a 2001 but basically the same bike.👌🤙👍
Hi Cameron I'm wondering what Cerakote series you use? And when will you have the 1 inch or just all the small cleaning wheels in stock? I finally got some spare money together to make my 1990 great again.
@@ericjaulin9562 Well yes, but why the covers? I'm just thinking because im considering painting my car rims and maybe later my ktms rims and engine covers.
Since you are working on one now, I thought I would ask your opinion. On my rm250 the wrist pin bearing has just a little bit of play on the pin itself. Is this normal or should the bearing fit snug on the pin? Thank you for your input
I need to go though my power valve on my rm. can’t wait the see what this bike is going to look like when done. It will need a nice home in New York my 01 rm125 needs a play mate. Lol
do you have tips what should i do mu 50cc yanaha dt x 2011 dont quite work... ot i mean it does work until im on 4th and 5th gear then it does not take any rpm otherwise it does work greatly
Could someone explain the purpose of the linkage I just rebuilt my bike have the topend left and the bottom piece of the linkage doesn't seem to have any purpose
Hey mate noticed you kept referencing the design to be 03-07 is that because they changed the design in 08 or did you not realise they made rms into 08
Cameron had a question what is your average budget on builds just wondering not sure if you talk about it in past videos but anyways good build tho keep up the good work nice truck ...notice you got fox setup on my 08 👊🏻💪🏻💪🏻
does the giveaway work with people in Hawaii?? because I'm from Hawaii and I have a 2017 yz125 and I love to ride mostly trail riding but if I won this bike I would ride it everyday..
Good morning my friend I need help from you I have a type of motorcycle rm250 2t She erased the piston and the liner and I need to blend the cylinder and redo a new piston Is it work it's okay we're not before please tell me Where are the original Susuki Shirt hits? ???
Bonjour, je suis français, et je me demandais comment vous faite pour rendre les pièces mécaniques dans cet état, des pièces en magnésium ou peinture ? Je regrette de pas comprendre l'anglais mais je m'abonne quand même, je retape un 80kx de 1999 mon cylindre est en nicasil mais du coup vous me donnez encore plus envie de tchecké le moindre détail. Biiig uup de France
That plate you put a washer on the power valve at 5:40 shouldn’t be tight it needs to have a bit of movement because that spring it sits in acts like a mini shock absorber for when the arm comes up and down.
Indeed, that arm must be loose. I protects the powervalve actuator mechanism in the event the power valve gets stuck. The mechanism will push the spring and not damage itself.
WOW CAMERON I AM FROM SOUTH AFRICA AND I JUST WANT TO THANK YOU FOR YOUR CRYSTAL CLEAR VIDEOS. I AM TRULY INSPIRED BY YOU. THANK YOU.
make a video on how to restore or polish up plastics. I bet a lot of people need this.
I think he did a while ago. He used a cleaning product that also shined the plastics and made them brighter.
Also if it has stress marks just very lightly go over it with a heat gun make sure to be light and conservative as to not completely melt the plastic
Agreeeeee
"always a bad day when you forget the lube" subtle 😂
I am currently waiting on my 1999 RM 250 cylinder which is in the mail from Powerseal, getting it replated , cant wait to put it back together. I was really unsure how the powervalve worked. This video was very informative. Thanks for putting out great content.
This is the video series I have been needing to rebuild my 99 rm250. Thanks so much Cam for doing such a well filmed and very thorough job.
Love the RM250 series, I picked up a 2003 RM250 and all the RM250 videos have been a great help. Thank You
I love your videos so much dude! I’m 12 years old and I am doing a full rebuild on my quad (ALL BY MY SELF) thanks to you!! Keep up the good work!!
3:35 it's not so much the area of the exhaust port that the 'power valve' affects but the height of the exhaust port. The higher the top edge of the port the earlier it starts to scavenge the exhaust gas which produces power at higher revs. When the port top edge is lower it produces power at lower revs. 😉
I’m really happy to see how far you’ve come recovering keep it up brother
love how clean and tidy you work
For those who work on the RM power valves be sure to look at the electrical schematic and notice the power valve solenoid. Not all models have the solenoid. If it’s not actuating as it should your bike may not operate at optimum performance levels. As I understand it the solenoid operates like a waste gate.
Rip brother ,still watching your content
I didn't know it had side valves , Explained it perfectly
You are the chrisfix of bikes, love these videos 💯
Really like your videos man. You really go into detail unlike some other youtubers. You do amazing work. On your future projects you must please consider doing a 4 stroke bike
Great video, helped me out re doing my yz250 powervalve. Thank you
Camtastic no one does how to videos like you the best take care and stay healthy
Awesome vid, can’t wait for the next one.
It’s crazy how much knowledge you have about this, keep it up
Your build quality is as always flawless.
Inspires me to do better every time I watch one of your vids.
Thanks for another great rebuild vid on this bike. You do an amazing, thorough job and not to mention explain it all so well. Looking forward to the next!
I have been trying for 2 hours to do what he did at the 4 1/2 minute mark. About to go insane 🤯🤯🤯🤯
Nice motor, nice asambly.. Always clean
Finally another upload from my favourite youtuber
Keeping me entertained during this lockdown😝
Can we get a video of you changing the dome on the cr250 to see the difference from the stock compression to the high compression?
If I won this bike I wouldn’t know what to do with myself
I won a car once in a raffle but didn't read the fine print. To receive the car i had to pay the taxes which i couldn't afford. If i won this bike it'd be the first thing I actually won and would receive lol. I had to sell my bikes cause the covid.
Me either I hope I win!!
Love your videos. Been very helpful for my son and his bike.
Nice job cam love your videos , giving dirt bikes another chance to Run and ride again🏍
And the innuendos are hilarious! Lol!!! Love your videos.
Is the next RM250 video coming out soon?
When will you be completing this build. Waiting to see the end results of the project.
where can I buy the engine stand / mount for the build? Great work mate!
Thanks man helpful video. Just dropped my cylinder off today to get fixed. Now we play the waiting game to get it back and back together haha 2000 rm 250. Thanx
This is a part of the previous build video right? Or am I going crazy
i thought i was going mad too, but find it very easy to watch it again.
Please answer pls. Should I run Rotella t in my 2016 yz250 2stroke trans? I seen you run it on the cr125 but is it ok with the 250?
Always a pleasure watching your videos dude. Hope your safe and well 👌
Your channel is inspiring builds 🤙 hey quick question . If I can't find a reputable company locally to bore my cylinder on the 97' CR125 build I'm doing, Is there one you would recommend I can mail my cylinder to ? Bore or resleeve idk what's cheaper ?
Can you use a crows foot to get that cylinder torqued
Love the show, it’s been a big help thanks. Can you Cerakote an exhaust ???? Might have some cool effects. That could be a fun video for you to make.
Great video love your work can’t wait to see the final build
You are a great youtuber Cam keep up the amazing work!! Your RM250 build videos have been very helpful to me as I am rebuilding the same bike just a year older, it is a 2001 but basically the same bike.👌🤙👍
Hay mate love your vids where did u get your engine stand for in need of one of these 👍
Hi Cameron I'm wondering what Cerakote series you use? And when will you have the 1 inch or just all the small cleaning wheels in stock? I finally got some spare money together to make my 1990 great again.
What is Cameron's favorite part of Halloween? Trick, or treat
Where could i buh cerakote, for it to arrive in spain. Thanks for your videos
One more time bro!! COOL videos🤘
These builds are really nice
Hey Cameron! I was wondering why cerakote those parts not powdercote?
Tolerances, powdercoat is way to thick and adds to the overall size of the part.
@@ericjaulin9562 Well yes, but why the covers? I'm just thinking because im considering painting my car rims and maybe later my ktms rims and engine covers.
I want to ask you. Can we apply the magnet of rm to another 2 stroke suzuki machine?
Beautiful cylinder blok😍
How do you know if your power valve adjuster is in its default position?
How did you replate the bore and with what material ?
Do you live in washington. Cause I feel like I saw you at a powersports place
You teach me A LOT
My offer still stands. I have all my own tools.
Better than OEM!
What kind og lube did you use for the exhaustparts?
Which manufacturer makes the best power valve system ?
Since you are working on one now, I thought I would ask your opinion. On my rm250 the wrist pin bearing has just a little bit of play on the pin itself. Is this normal or should the bearing fit snug on the pin? Thank you for your input
Nice setup on your truck on my 08 Meant
Where did you get the head in the end scene?
Good video my suzuki rm 2005 250 cc is not the same power valve .Have a nice day from Bulgaria.
Your next build should be a 86 honda atc250r three wheeler
I need to go though my power valve on my rm. can’t wait the see what this bike is going to look like when done. It will need a nice home in New York my 01 rm125 needs a play mate. Lol
Going to start my own rebuild project during this crazy time , got any discount codes for RMATV to keep cost down a little??
Awesome work bro I learned alot from you
Any progress with the RM?
really wanna get some cearakoting done on my dirtbike engine but can’t afford it
Been kinda waiting for this one
Can you show us how to rewire it
wow super nice....i can't wait for bike is done🔥🔥🔥🔥
Do you have a swing arm for an 04 cr250r i just bought it and the old owner let the chain rubb threw into the bearings
Hay Cam have u sean the new Neiklo engine stand it's awesome if u have an get it u should do a contest to give your old 1 away?
do you have tips what should i do mu 50cc yanaha dt x 2011 dont quite work... ot i mean it does work until im on 4th and 5th gear then it does not take any rpm otherwise it does work greatly
how you learned to rebuild engines?
Can you post some ride videos?
Very helpful information man, always learning from you🙏🏻
This bike Should sit on a stand in front of a bar 🔥
Could someone explain the purpose of the linkage I just rebuilt my bike have the topend left and the bottom piece of the linkage doesn't seem to have any purpose
Is a crf150r same speed as ktm 85 or 125
Looks sick!👍🏻
Hey mate noticed you kept referencing the design to be 03-07 is that because they changed the design in 08 or did you not realise they made rms into 08
your over here building bike after bike wish I had the money for one in general lol
Cameron had a question what is your average budget on builds just wondering not sure if you talk about it in past videos but anyways good build tho keep up the good work nice truck ...notice you got fox setup on my 08
👊🏻💪🏻💪🏻
Cameron. Your the Man. Incredible Work. You have a Job if you want to come work for me ??
Tricked out Cycles. Warminster Pa !!
does the giveaway work with people in Hawaii?? because I'm from Hawaii and I have a 2017 yz125 and I love to ride mostly trail riding but if I won this bike I would ride it everyday..
Call me stupid, but what does the secondary valve do?
Yes
Imagine winning this bike 😍Idk what id do with myself oml lol but lovin this build 🙌🏼
So satisfying to watch
Good morning my friend I need help from you
I have a type of motorcycle
rm250 2t
She erased the piston and the liner and I need to blend the cylinder and redo a new piston
Is it work it's okay we're not before please tell me
Where are the original Susuki Shirt hits?
???
Man, I want this bike!! Lol great job man!!
Look at that broo!! :)
I am rebuilding an 01 and my power valve is different
Great video! Can you assist me with my build? It seems as if I’m losing air through my intake when I try to kick start.
Bonjour, je suis français, et je me demandais comment vous faite pour rendre les pièces mécaniques dans cet état, des pièces en magnésium ou peinture ? Je regrette de pas comprendre l'anglais mais je m'abonne quand même, je retape un 80kx de 1999 mon cylindre est en nicasil mais du coup vous me donnez encore plus envie de tchecké le moindre détail. Biiig uup de France
Omg I wan it so bad I been watching you since you first start a TH-cam
兄弟 我想看你修理yamaha dt230