@willeb522 right now I have stock struts with 3 inch spacer kit on top and it rides like a super duty stiffness wise was just wondering if these ride better than a spacer kit does
@@johnconway6977 The ride is much stiffer as expected no sugar coating it. But it handles nice on rough terrain your truck kind of says bring it on!! Enjoy your project plan and take your time. Good Luck!
First time I've seen this 36mm nut, everyone else has been showing the 15mm I think it is. Do you know when this 36mm nut came into play? I didn't plan on ripping my tire off until my struts show up but I have a '22 and saw on '21 it was still the 15mm.
I was surpised as well, thought I was going to replace an apparently common 15mm axle nut then it turned out to be a 36mm nut which my local ford did not have in stock untill a day later. When and why it changed your guess is as good as mine. Thanks!
IMO..the M1s are too stiff. These would be good for HD truck. But for alumibody short bed f150, they are rough. You feel everything on the road. N3 or bilstein for the rear.
Ok not at all. If anything it would affect the upper ball joint, but with the after market upper control arms angle it's just right after 6,000 miles install all ok. Thanks
@@willeb522 that’s good to know. I ordered the 3 inch lift as well and waiting for it to come in. Was worried about those cv axles that I hear about getting in a bind. Thanks
Well done boss!
Thanks!
@willeb522 does the m1 struts ride as good as factory or are they really stiff
Definetly Stiff, but mind you I do go off road. If you want a smoother ride keep the stock struts and shocks. 👍
@willeb522 right now I have stock struts with 3 inch spacer kit on top and it rides like a super duty stiffness wise was just wondering if these ride better than a spacer kit does
Looking at doing this set up on my 2023 with the M1's. How is the ride now? Can you make a video after the install? Thank you for making this!
@@johnconway6977 The ride is much stiffer as expected no sugar coating it. But it handles nice on rough terrain your truck kind of says bring it on!! Enjoy your project plan and take your time. Good Luck!
First time I've seen this 36mm nut, everyone else has been showing the 15mm I think it is. Do you know when this 36mm nut came into play? I didn't plan on ripping my tire off until my struts show up but I have a '22 and saw on '21 it was still the 15mm.
I was surpised as well, thought I was going to replace an apparently common 15mm axle nut then it turned out to be a 36mm nut which my local ford did not have in stock untill a day later. When and why it changed your guess is as good as mine. Thanks!
Feel free to ask any questions, I will answer to the best of my ability.
can you do a video on how the truck looks after you put the tires on , beautiful truck !
IMO..the M1s are too stiff. These would be good for HD truck. But for alumibody short bed f150, they are rough. You feel everything on the road. N3 or bilstein for the rear.
How are the cv joints?
Can you be a bit more specific!
@@willeb522 are the cv axles in a bind after the lift?
Ok not at all. If anything it would affect the upper ball joint, but with the after market upper control arms angle it's just right after 6,000 miles install all ok. Thanks
@@willeb522 that’s good to know. I ordered the 3 inch lift as well and waiting for it to come in. Was worried about those cv axles that I hear about getting in a bind. Thanks