Adding a Unique Touch to our Tribute Trans Am - MuscleCar S3, E17
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- Rick designs and builds a custom roll bar for the '69 Firebird. Brent lays some metal filler on Red Sled. The Firebird gets a wiring harness, pulley set, and custom wheels.
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Chevrolet Performance: LS7 small block 7.0 liter 505 hp and 470 ft/lb torque, complete with wiring harness for ignition, fuel injection, and drive by wire throttle pedal assembly.
KnKut Performance Drills: Performance drill bit sets.
March Performance: Black powdercoated serpentine belt drive system complete with A/C compressor and power steering pump for LS-7 motors.
TCI Automotive: 4L60E Super Street fighter transmission with LS motor bellhousing, 10" torque convertor, locking dipstick, performance transmission fluid cooler, TCU and wiring harness.
YearOne: 18x9 Silver Honeycomb replica wheels. 18x11 Silver Honeycomb replica wheels. - ยานยนต์และพาหนะ
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 กรกฎาคม 2567](http://i.ytimg.com/vi/B8gcGM6I6e4/mqdefault.jpg)
A tribute Trans Am with a LS motor wow what a tribute to Pontiac.
Agreed, should have been a 455
@@deancooper6300 A 455 LS!!!
the LS7 was hot shit back then
I love that you guys still do these shows and that you put out the full ones cuz I don’t even watch Tv anymore. But i can tell you while kids were sleeping or watching cartoons i was up on the west coast at 530 catching the horsepowerblock! My mom thought i was different but knew it when i got up at dark to watch engines and cars in stress of wrestling and stuff normal kids were into haha. Now that I’m older and i see these kids growing up on cartoons and how wierd and shit it makes them being all loud and obnoxious like the cartoon characters and shit lol and I’m like god damn good thing i didn’t have much of imagination as a kid and that’s probably why i always ended up with the older crowds in school haha. Shit I was the only freshman who could fabricate you a hot side in the morning and have you swing through the shop side and pick your car up and go boost on the way to lunch haha.
Or you could've used a ridgid conduit bender (Chicago bender)
🔥🔥🔥NICE WORK IVE NEVERTHELESS SEEN THAT TECHNIQUE TO BEND PIPE BEFORE
nice guys pretty good job
waiting for the 69 camaro in detroit muscle wanna see the suspinsion upgrade and the engine that goes from carb to EFI please don't late in uploading it
Couldn’t find a Pontiac engine to put in it?
I want to see you drop an LS in a corvette. LS for LS, that would be amazing!
Let's move on the Impala, that would impress me!
I'm sure these were all finished years ago. According to TV Guide, this episode aired in 2008.
TheKiltedYaksman1 bastards! So disappointed I’m unsubscribing !!
I do know a dude with a 67 k20 camper special with a wicked 429 scj c6. Divorced double 205-203 t -case 42 inch boggers ect .
Don't really understand the purpose of that roll bar. A Pontiac 400 with a Fast fuel injection would have been cooler too.
Man you guys get paid to build giant model cars..... where do I sign up??🤔🤔😁
I'd prefer a Butler Performance 541 inch engine.
Beavis and Butthead AND Homer Simpson in one go.... Legendary
Yes
should have used a pipe bender ,a lot faster and perfect fit
Guna be one cool ride guys
Its really a shame the minute Delorean died so did Pontiac. What a dream John had to want to make it a performance division. Shame on GM for the kibosh.
#3
nacho varga got a body work job now huh
2018
Is this the firebird that was all rotted out and was sent back to year one?
Yes it is
Окей
Сойдёт для сельской местности.
Best video for not using the proper tools.
Just a tip... When heating pipe to bend, only heat the inside of the bend, that way it will compress the metal inside the bend instead of the heat allowing the metal to stretch on the outside of the bend. Stretching the pipe will allow the metal to stretch out causing it to be less strong in that area!!!
But then you risk flatening out that section like bending a straw
@@mattvest1660 I guess that could be possible but I never had that problem....
Plus he literally said it's for looks, that roll bar won't actually be a roll bar, just an addition in appearance. So compromised strength in the pipe doesn't matter in this application.
Should of been 303 inch destroked sd motor per trans am spec. But with tech from today aluminum block fortified lifter bores ect. No real poncho fan wants anything ls in there .imagine a cobra with a 440 mopar .badass motor but it has no buisiness there. I am building an ls powered c10 but my 69 cyclone is fe powered.
I HATE SEEING CHEVY POWER IN A PONTIAC. WTF GUYS.
The announcer sounds like the old drag strip radio ads announcer. A stupid sounding exaggerated almost cartoonish voice.
Fix up a 1950 Ford f1
howcomes brad dont talk
shouldve soaked the wood in used motor oil. itill add a some fire resistant.
no it wont it will smolder and smoke worse - not even water - just do it dry or use a hydraulic tube bender !
Those wheels aren’t so great looking
(Drawing a deep breath)
Booooooooooooooooo!!!!!
How about a tribute Chevelle SS with a 455 Super Duty?
Those wheels suck! Even for a second generation (where they belong)
I’m 16 and i have a 1993 Ford F-150 with the 302 EFI I would like to get 350 to 400 hp what do I need
I help you fixed my car and truck and cut grass
1st