I have an old s10 truck that's still runs good but looks like crap so it's not worth the cost of a proper paint job. So I have 2 tintable raptor kits with red tint to spray it this summer when the weather gets better.
I love Raptor Liner. I have pretty much Raptored every major piece and trim on me car. Body, door panels ect.. You can even paint over the black using your own flare and imagination. Your world is a canvas.
Thanks mate. I just bought a 2004 TJ Wrangler 2 door. Going to give this a go. You really explained this so well dude. I live in Hawaii. On Big Island. I love exploring extreme lava fields.
Great video. Short and to the point. Will be Raptor lining a 1985 Jeep J10 that has faded paint. I have the Olive Green tint and 8 litres of base Raptor. I must wait for it to stop raining before I can spray because the bed is outside and I am spraying the doors and fenders outside. It has been raining or the temp has been 95F (35C) every day this month, so I am hoping for a few days in the 80s or lower 90s.
i used it on my front and rear bumpers, bushwacker flares, and aluminum running boards on my F250, it all turned out great and a year later still looks like the day I sprayed it.
I was thinking about putting some on the flares and rear bumper of my jeep as they're starting to look a little faded. I think you've convinced me by how easy this looks. Thanks!
Fantastic job!! My Raptor liner kit arrived today. I have a Tj and going to do the front flat fenders (smittybilt) rocksliders and rear flares. I also have the Raptor acid etch primer. Thanks for the video👍
Awesome video mate! One of the more enjoyable and nice to watch out there. I'm doing my little Romanian SUV (you might know it as the Renault Duster) this coming week and I've watched a ton of videos already. Anxious as... Again - good job!
Great video I'm doing my RAV4 in silver unfortunately it's been raining here for three weeks pretty much so I'm having a hard time getting this job done but I love the video so informative I've never done this before and this has been the best video that I watched this will help me get my car done I appreciate you brother from East New York Brooklyn
Nice work!! I’ll be using it on the hood and cab top on my Chevy K1500 truck. I initially started with spray can application but it did not last on the top surfaces, raptor should do well!
I'm thinking about buying a 1978 CJ5 Levi's edition Jeep. It is totally trashed bodywise so I am thinking of using this stuff inside and out. Should be cool.
I’ve got a 2000 Camaro Z28 that’s in pretty good shape except for one major area: the paint. Instead of paying a fortune for something delicate and requires frequent care only to hope someone doesn’t ding your door in a parking lot, I’m throwing care to the wind and have decided to Raptor line it.
Is great stuff 👍 Remember is all in the prep.. also top tip if spraying give it a test spray on something else first to adjust your pressure till you get a texture you like
Great video. Much appreciated. Would this work on Honda Element plastic panels? They are a little rough so would I need to sand or just clean and degrees. Any thoughts on how to prep these panels? Thanks
My son inherited my 1997 Toyota Tacoma 4x4 manual 5 speed as his first truck. It turned out fantastic and presented an opportunity for me to teach him how to prep a truck for paint. It turned out absolutely fantastic looking. I do have a question, should we add a clear coat finish to keep it shiny or will it hold it's luster left alone ?
@@VideoShowMeHow thank you sir, we live in Florida in the U.S. and didn't know if our tropical conditions would kill the perfect sheen on the finish. Be safe brother
Hey mate, loved that video. I want to Raptor Coat my Land Rover 110 which I've been restoring, but, I'm a little hesitant to do it myself. Keswick Green with white roof would look awesome if I can get past my hesitations.
Maybe grab a old car panel and a single bottle to test with? Might help with the confidence. It really is pretty straightforward, all in the prep of course, making sure everything is roughed up really well, spraying is the easy bit :)
Do you need to use a primer or lacquer coat at all I'm going to use this on mud guards bonnet chip guard and outer door trims all plastic and also use it on the aluminium side steps.
Awesome video! Very very helpful. If my truck is sanded down to bare metal do I need to use etch primer and then put the grip for over the etch primer and then apply the raptor line?
Hows the black raptor holding up now? Would be cool to see an update video. Im buying a 98 ram 4x4 and its black. Im absolutely going to raptor it but im unsure of doing it in black. So far every lined truck in black looks gray after some time. So im unsure about the color for now
@@VideoShowMeHow ah, ok. That's the only reason I'm hesitant to do black raptor. I was considering doing a lighter color. Either gray or red. They seem to blend better and look cleaner. Did your jeep fade?
I'm considering applying raptor to the aluminium & fibreglass of my DIY camper slide on. Was wondering how flexible it is, and I think you answered that when you pointed out the fibreglass guards on the jeep. Thanks for the heads up! Great channel by the way. Subscribed.
Thanks mate 👍 I'd say it's a little flexible for sure, I'm about to raptor my camper as well actually! Perfect product for it I'd say. Just make sure you get everything nice and scuffed before paint. 🏕️🚙
Will be doing a 1980 cj5 with bright white and black accents . A little more body work and the temp to come up in Nc. That is the exact texture I want what was your pressure in psi ?
Wow love it. Want to use it on my rc builds. Especially I can add color to it🦾🦾🦾🦾🦾👍👍👍👍👍👍👍🎉🎉🎉🎉🎉🎉🎉 great job by the way love the way it looks. Trying to see if my fiancee lets me do her truck😁😁😁😁😁😯😁😁
Hi! Great tutorial video. So, did you just use 180 grit sandpaper? Can 400 grit sandpaper fit just to remove the gloss from the Original paint? Tank you.
@@VideoShowMeHow Scratched everything with p120 and then the plastics finished with p400. Is 100% acrylic primer good for plastics before painting with raptor? Thanks so much!
I am wondering how well that would work on the inside of my 2007 JK hard top and freedom panels. They are currently white but I want to paint it black.
So I have this on my vehicle for about five years now and it’s starting to chip. Do I have to completely take everything off in order to reapply or can I just touch it up
Hi just wondering if you could help or maybe somebody can Answer, I have a Toyota tundra which is white I’m thinking about doing this to the whole truck and Saul somewhere where there was a comment saying that white doesn’t look good what do you think about doing my whole truck? And should I use maybe a dark gray question
I'm planning to paint my Kia Sportage with it... But would it be better to leave bodykit on or take it off when painting it (wondering can it fit back without any caps after painting)🤔
How does the raptor lining clean up with mud and say maybe bird shit? Does the grit make it harder to clean? Or is the care for raptor lining just power washing? Looks amazing btw!
anyone know if i could use this stuff on the interior carpet of my wrangler? i want to just roller this on the carpet directly so i could turn it into a trunk i can clean easily while keeping the OEM look
Spraying with Raptor the roof of a small sports car. Problem was could only use the product for 15-20 minutes befor it cured in the gun. Anyone have a solution?
I am thinking about putting raptor liner on the interior of my 1979 cj7 , but do you recommend a higher psi or a lower psi, because I like the look of the 50 psi on the exterior but I'm not sure if that would look that great on the inside so I'm wondering if I should add a little more psi?
i wanna do the bottom rocker panels on my truck but some one has done it already not in raptor but a different brand do you think i need to get to bare metal or can i go over the exisiting liner
Hey, do I need to have a hardening container for every liner container? Was going to purchase The Raptor kit from Amazon, noticed there were 8 Liner bottles but only 2 hardener containers.
Used a compressor :) Roller is super simple, shake pour roll. Tip is don't let it skim so only half fill them screw lids back on. Give it a good shake before topping up.
@@VideoShowMeHow meant the color of raptor, i have a 2014 mitsubishi l200, bought all the extra parts for it, wide fenders, roll bars with cargo, bonnet scoop hood vent, lifted up by 3’’ costume made steel front and back bumpers, and many more, got it all ready 6 months ago i just can’t decide what color should i paint it now to finish it off, definitely going for a raptor just clueless what wld look good on it.. reason i asked wasn’t sure yours was dark grey or black.. looks amazing in black buddy, you did a good job 👏
Hey guys! What are you raptoring?? Let me know in the comments below :)
I have an old s10 truck that's still runs good but looks like crap so it's not worth the cost of a proper paint job. So I have 2 tintable raptor kits with red tint to spray it this summer when the weather gets better.
@@towboatjeff nice! Sand it down real good and will look a million bucks
About to do my 05 single cab Tacoma and looks like this is the liner to use. Thanks for the vid
2013 Jeep Wrangler
Jon boat and my 97 tj
I love Raptor Liner. I have pretty much Raptored every major piece and trim on me car. Body, door panels ect.. You can even paint over the black using your own flare and imagination. Your world is a canvas.
Yeah it's awesome stuff
Im thinking abt Raptoring my 98 jeep grandcherokee 5.9...4" lift ,roof rack,highlift jack ,rockhard 4x4 frint bumper..i caint wait...thanks dawg!!!🙋♂️🙏💯
Doing it on my 2007 jeep wrangler J/k and I’m so excited to do this
Thanks mate. I just bought a 2004 TJ Wrangler 2 door. Going to give this a go. You really explained this so well dude. I live in Hawaii. On Big Island. I love exploring extreme lava fields.
@@keonesilva3646 that's awesome 👍 Keen to get over there one day
I'm about to paint my TJ jeep and sprinter van in tintable raptor.seems a awesome product...great video.cheers
Great video. Short and to the point. Will be Raptor lining a 1985 Jeep J10 that has faded paint. I have the Olive Green tint and 8 litres of base Raptor. I must wait for it to stop raining before I can spray because the bed is outside and I am spraying the doors and fenders outside. It has been raining or the temp has been 95F (35C) every day this month, so I am hoping for a few days in the 80s or lower 90s.
i used it on my front and rear bumpers, bushwacker flares, and aluminum running boards on my F250, it all turned out great and a year later still looks like the day I sprayed it.
Yeah is good stuff
this is a great 5 minute video
I was thinking about putting some on the flares and rear bumper of my jeep as they're starting to look a little faded. I think you've convinced me by how easy this looks. Thanks!
Yeah will come up like new! The challenge will be convincing yourself not to do the rest then haha
Fantastic job!! My Raptor liner kit arrived today.
I have a Tj and going to do the front flat fenders (smittybilt) rocksliders and rear flares. I also have the Raptor acid etch primer.
Thanks for the video👍
Cheers!
Awesome video thank you for putting this together. Has been great tips as I'm planning to do my JK hardtop and guards.
Here we go I just found new project to do! Putting raptor on my raptor!
Oooo yeah!
Awesome video mate! One of the more enjoyable and nice to watch out there. I'm doing my little Romanian SUV (you might know it as the Renault Duster) this coming week and I've watched a ton of videos already. Anxious as... Again - good job!
Thanks mate!! 🤘
Great video I'm doing my RAV4 in silver unfortunately it's been raining here for three weeks pretty much so I'm having a hard time getting this job done but I love the video so informative I've never done this before and this has been the best video that I watched this will help me get my car done I appreciate you brother from East New York Brooklyn
Hopefully stops raining for you soon 🤘
Awesome video! Thank you from Rhode island USA
Nice work!! I’ll be using it on the hood and cab top on my Chevy K1500 truck. I initially started with spray can application but it did not last on the top surfaces, raptor should do well!
I'm thinking about buying a 1978 CJ5 Levi's edition Jeep. It is totally trashed bodywise so I am thinking of using this stuff inside and out. Should be cool.
I’ve got a 2000 Camaro Z28 that’s in pretty good shape except for one major area: the paint. Instead of paying a fortune for something delicate and requires frequent care only to hope someone doesn’t ding your door in a parking lot, I’m throwing care to the wind and have decided to Raptor line it.
Is great stuff 👍 Remember is all in the prep.. also top tip if spraying give it a test spray on something else first to adjust your pressure till you get a texture you like
cheers for this vid im bout to do a mates gq
Great video. Much appreciated. Would this work on Honda Element plastic panels? They are a little rough so would I need to sand or just clean and degrees. Any thoughts on how to prep these panels? Thanks
Absolutely great video, I learned a lot. 👌💯
I want to use rappter liner for whole body of my jeep basically jeep is too old I want to paint it with out using any kind of premier or filling
Great video and nice job on the Jeep. However, the whole time I was watching I kept thinking "What if Chris-Fix was Australian?".
My son inherited my 1997 Toyota Tacoma 4x4 manual 5 speed as his first truck. It turned out fantastic and presented an opportunity for me to teach him how to prep a truck for paint. It turned out absolutely fantastic looking. I do have a question, should we add a clear coat finish to keep it shiny or will it hold it's luster left alone ?
No clear coat needed, will stay looking the same. Hood still looks like it was painted yesterday :)
@@VideoShowMeHow thank you sir, we live in Florida in the U.S. and didn't know if our tropical conditions would kill the perfect sheen on the finish. Be safe brother
@@gatornation3889 I'm in QLD Australia so very similar. Cheers mate, you too
Thinking about raptor lining my old ford ranger. How did you prep the truck?
Same as the vid, sand, grease remove, cover anything you don't want raptored, spray/roll
Lol. Nice
okay but how much weight does that add?
Does it fade?
Hey mate, loved that video. I want to Raptor Coat my Land Rover 110 which I've been restoring, but, I'm a little hesitant to do it myself. Keswick Green with white roof would look awesome if I can get past my hesitations.
Maybe grab a old car panel and a single bottle to test with? Might help with the confidence. It really is pretty straightforward, all in the prep of course, making sure everything is roughed up really well, spraying is the easy bit :)
2019 MERCEDES GLE AMG 63 RUNNING BOARDS. I'm blacking out the vehicle and the runners silver.
Do you need to use a primer or lacquer coat at all I'm going to use this on mud guards bonnet chip guard and outer door trims all plastic and also use it on the aluminium side steps.
Does it create a golf ball dimples and improve aerodynamics
@@aargomemnon Oh, most definitely 😁
Awesome video! Very very helpful. If my truck is sanded down to bare metal do I need to use etch primer and then put the grip for over the etch primer and then apply the raptor line?
You got it 👍
Hows the black raptor holding up now? Would be cool to see an update video. Im buying a 98 ram 4x4 and its black. Im absolutely going to raptor it but im unsure of doing it in black. So far every lined truck in black looks gray after some time. So im unsure about the color for now
No longer have the jeep unfortunately. I know what you mean with the 'grey', I actually think it's the way the light interacts with the texture
@@VideoShowMeHow ah, ok. That's the only reason I'm hesitant to do black raptor. I was considering doing a lighter color. Either gray or red. They seem to blend better and look cleaner. Did your jeep fade?
I'm considering applying raptor to the aluminium & fibreglass of my DIY camper slide on. Was wondering how flexible it is, and I think you answered that when you pointed out the fibreglass guards on the jeep. Thanks for the heads up! Great channel by the way. Subscribed.
Thanks mate 👍 I'd say it's a little flexible for sure, I'm about to raptor my camper as well actually! Perfect product for it I'd say. Just make sure you get everything nice and scuffed before paint. 🏕️🚙
@@VideoShowMeHow Ta - yes you made the preparation abundantly clear! (Which I really appreciate)
😂😁
Will be doing a 1980 cj5 with bright white and black accents . A little more body work and the temp to come up in Nc. That is the exact texture I want what was your pressure in psi ?
Talk all about the pressure etc at 9:16 👍
What did you use for the plastic cover
Can I apply this to Mdf entrance or Aluminium Entrance door?
New bonnet and I have thought about the hole car but I’m having problems in getting a tint for the tint able raptor.
Most auto shops should be able sell you just the 2k tint
Using it on a 1993 jeep cherokee country....code named Night Fury
@VideoShowMeHow Good training video,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!😊
Wow love it. Want to use it on my rc builds. Especially I can add color to it🦾🦾🦾🦾🦾👍👍👍👍👍👍👍🎉🎉🎉🎉🎉🎉🎉 great job by the way love the way it looks. Trying to see if my fiancee lets me do her truck😁😁😁😁😁😯😁😁
GUITAR BODY FINISH❤
Hi! Great tutorial video. So, did you just use 180 grit sandpaper? Can 400 grit sandpaper fit just to remove the gloss from the Original paint? Tank you.
Yep you want it to be nicely scuffed up, if it's too smooth the raptor won't stick as well
@@VideoShowMeHow thanks! ✌🏻✌🏻
@@VideoShowMeHow Scratched everything with p120 and then the plastics finished with p400. Is 100% acrylic primer good for plastics before painting with raptor? Thanks so much!
I am wondering how well that would work on the inside of my 2007 JK hard top and freedom panels. They are currently white but I want to paint it black.
Sure will, prep is key
How many bottles did you use ?.Looks great
Just the one
So I have this on my vehicle for about five years now and it’s starting to chip. Do I have to completely take everything off in order to reapply or can I just touch it up
Nah just sand/rough it up and the surounding little patch and use some of their raptor in a can to respray
Hi just wondering if you could help or maybe somebody can Answer, I have a Toyota tundra which is white I’m thinking about doing this to the whole truck and Saul somewhere where there was a comment saying that white doesn’t look good what do you think about doing my whole truck? And should I use maybe a dark gray question
Have seen full white in person and reckon it looks great!
@@VideoShowMeHow cool thanks for the reply
The wrangler bull-bar paint keeps piling off,do you think if we use the raptor paint that would do a better job?Making use it doesn’t pill off.
With the right prep, raptor doesn't come off anything 😆
Will this work on chrome...on my bumper? And I also wanna do my roof of my truck as well flat black
Yep
I'm planning to paint my Kia Sportage with it... But would it be better to leave bodykit on or take it off when painting it (wondering can it fit back without any caps after painting)🤔
Hey, did you leave the bodykit on, or took it off? I am looking forward on doing the same thing, but dont really want to take everything off.
Hello, great video. How many bottles did you end up using to finish the job on all the parts on this video. 2 coats on all parts ?
Hey there, was about 2.5 from memory, and yep 2 coats on everything 🙂
@@VideoShowMeHow Thank you. Trying to figure out how much I will need for my project
From their website 👍 "One RAPTOR 4L Kit will cover approximately 12 sq metres at recommended film build (3 sq metres / litre)."
@@VideoShowMeHow I have a whole 4L kit in a box. I have plenty. I probably will
end up using only 2 bottles
My raptor paint is starting to chip a little bit on the hood. So do I spray it over the chip or just peel the chip off and then spray?
Just sand with some 80 grit to scuff up the area, if hard to reach use some of their adhesion promoter first, then raptor back over
Hi! Are you painting vehicles for customers? I'm looking for someone to paint mine etc or can you recommend someone on the GC?
No I don't, not on the GC sorry mate so unsure
How does the raptor lining clean up with mud and say maybe bird shit? Does the grit make it harder to clean? Or is the care for raptor lining just power washing? Looks amazing btw!
Easy peasy, just regular wash, to be honest most of the time I just soak in truck wash them power wash off. Is great.
anyone know if i could use this stuff on the interior carpet of my wrangler? i want to just roller this on the carpet directly so i could turn it into a trunk i can clean easily while keeping the OEM look
On the actual carpet? Wouldn't recommend.. common on Jeeps to remove the carpet and use a product like this though
Spraying with Raptor the roof of a small sports car. Problem was could only use the product for 15-20 minutes befor it cured in the gun. Anyone have a solution?
Suggest waiting for cooler weather of adding some thinner
I am thinking about putting raptor liner on the interior of my 1979 cj7 , but do you recommend a higher psi or a lower psi, because I like the look of the 50 psi on the exterior but I'm not sure if that would look that great on the inside so I'm wondering if I should add a little more psi?
Get yourself a bit of scrap and test to see which you like 👍
i wanna do the bottom rocker panels on my truck but some one has done it already not in raptor but a different brand do you think i need to get to bare metal or can i go over the exisiting liner
If it's still in good nick should be ok, just make sure you rough it up same as everything else 👌
Hey, do I need to have a hardening container for every liner container?
Was going to purchase The Raptor kit from Amazon, noticed there were 8 Liner bottles but only 2 hardener containers.
No, the hardner will be enough for a few bottles, will have the right amount in the kit 👍
@@VideoShowMeHow Sweet! Thank you.
Hey,
Just wondering if the colour faded with time?
No, still good 👌
@@VideoShowMeHow sweet i might have to get it done, can anyone with no experience be able to do it?
Did you remove your weather stripping so you could paint under it? Or did you tape it off?
Tape 👍
@@VideoShowMeHow Awesome thanks!
Little tip, mask off the grille / vent pieces!
Especially if painting on the vehicle 👍👍
Hi, nice job, what face mask did you use? Cheers
Was a face respirator with dual filters 👍
An 07 subaru legacy gt.
What prep did you do on the bullbar/powder coated surfaces?
Same as anything else but, sand back etc same as vid 👍
@@VideoShowMeHow cheers mate
is a 2nd layer really necessary or is 1 layer enough?
Nice work!
Def recommend recommend second coat
Can you please tell me the name of the blue sir
Of the Jeep?
How many cans for 2 layers tnx
For this was 2x bottles
@@VideoShowMeHow for whole jeep i mean. Tnx
@@VideoShowMeHow cant find it anywhere how much i need for a jeep grand. 2 layers
@@iammadz best estimate would be 6 bottles
@@VideoShowMeHow tnx bro. Did u go 2 layers?
“báhhhhh” 😂😂😂
Did I miss the roller?
Used a compressor :) Roller is super simple, shake pour roll. Tip is don't let it skim so only half fill them screw lids back on. Give it a good shake before topping up.
What colour is that?
The Jeep or the raptor? Jeep is 'Steel Blue' an 08-09 colour and raptor is black
@@VideoShowMeHow meant the color of raptor, i have a 2014 mitsubishi l200, bought all the extra parts for it, wide fenders, roll bars with cargo, bonnet scoop hood vent, lifted up by 3’’ costume made steel front and back bumpers, and many more, got it all ready 6 months ago i just can’t decide what color should i paint it now to finish it off, definitely going for a raptor just clueless what wld look good on it.. reason i asked wasn’t sure yours was dark grey or black.. looks amazing in black buddy, you did a good job 👏
I'm sorry wtf is Hoddna?
eh?
What is hoddna? @@VideoShowMeHow
Next time more of the vehicle and less of your hand waving in front of the camera. Otherwise great job.
You sound like your paying him chief