i love the parts where you zoomed in to really show how you’re using the corners of the blade, more often then not a lot of people say theyre using the corner but on camera or in the video it looks like they are almost cutting normal ( using most the blade ), i also like the knowledge and insight you gave when it came to using the shears, super beneficial and informative, thank you for sharing and uploading these gems!!
is there anyway you guys can make a “fading for dummies” tutorial, all these tutorials you guys have really opened my eyes and have taught me a lot but Im still super nervous and have a lot of questions before going into my first ever cut. I tend to get lost in the debulking part of the fade and the steps you guys have shared seems overwhelming when it comes to using so many guards lol. It seems possible and maybe im just overthinking and nervous but I understand that with the open lever you take it out with the lever closed and with the one open you take it out with the half guard closing and opening the lever ofc as necessary and so on and so forth but I tend to get lost when it comes to using the 2 guard and taking it out with the 1.5 because after that theres still a line at the top that tends to be super dark ofc because its apart of the bulk so i feel like a video on fading for dummies would be awesome lol. Im that dummy hahah
Damn at 887k subs already. I’m an OG I’ve been here since y’all had 880k, wish I was here from the beginning, I’m trying to unlearn all my old techniques
Thanks for another awesome video! been watching since I started barber school and you guys got me through it ! 🖤 can we get a blowout taper with a curly top tutorial
Bless I rather use the 1 clip instead of 1 1/2 shaping up reason be the blend is more define and less touch up work than when you skip 1 and go to the 11/2 if am making any sense around the fade area a little bit darker because you skip the 1 for 11/2
Them wahl seniors putting in that work still. I love mines just hate the battery life. Picked up an onyx yesterday, hoping I get that same feeling just with 4 hours of run time. 😅
I switched it up bro just for this video I like trying new ways and I look for new ways to make it easier for yall but by all means stick to what makes more sense to you and practice that till you build good muscle memory
i tell my clients not to look up because the lines on forehead when they look up makes it almost impossible to fade the panel on the parietal ridge area
You guys are doing it again… this is called a drop fade. Not a low fade. A low fade is supposed to be dark at the temple p and c cup area. You guys take to much of room and blending to high, and then calling it a low fade. This is disrespect to the barbers who putting in work for a compressed low fade. Next time i would like to see a real low fade. Not a mid fade or a drop fade. (The temple p and c cup should be dark without enhancements) 😄
Watch 0.50-0.59 on the video… the client literally said he didn’t want a c cup … you’re probably a shxt as barber hating on someone who makes more money in 2 days then you do in a whole week 🤣
i love the parts where you zoomed in to really show how you’re using the corners of the blade, more often then not a lot of people say theyre using the corner but on camera or in the video it looks like they are almost cutting normal ( using most the blade ), i also like the knowledge and insight you gave when it came to using the shears, super beneficial and informative, thank you for sharing and uploading these gems!!
My favorite barbers on TH-cam. Fc yall are killing the game, these tutorials always keep me motivated and help me elevate my craft 🙏🏼🖤
This is a high drop fade, if there’s no c cup it’s a high fade, but since you dropped it, it’s a high drop fade
is there anyway you guys can make a “fading for dummies” tutorial, all these tutorials you guys have really opened my eyes and have taught me a lot but Im still super nervous and have a lot of questions before going into my first ever cut. I tend to get lost in the debulking part of the fade and the steps you guys have shared seems overwhelming when it comes to using so many guards lol. It seems possible and maybe im just overthinking and nervous but I understand that with the open lever you take it out with the lever closed and with the one open you take it out with the half guard closing and opening the lever ofc as necessary and so on and so forth but I tend to get lost when it comes to using the 2 guard and taking it out with the 1.5 because after that theres still a line at the top that tends to be super dark ofc because its apart of the bulk so i feel like a video on fading for dummies would be awesome lol. Im that dummy hahah
Wow wow that's awesome about the haircut 💈 looks totally different than before
Watching From Malaysia ❤
Bro has the best tutorials
Thank you 🙏🏽
Damn at 887k subs already. I’m an OG I’ve been here since y’all had 880k, wish I was here from the beginning, I’m trying to unlearn all my old techniques
lol thanks bro! Trying to get to that milli 🙏🏽🏴
Excellent work thanks 👍
Hermoso trabajo querido amigo muchas gracias y bendiciones
Thanks for another awesome video! been watching since I started barber school and you guys got me through it ! 🖤 can we get a blowout taper with a curly top tutorial
So smooth 😎
So clean, extremely satisfying to watch 👌🏻
Glad you enjoyed it bro! Thanks for the love 🙏🏽
Love it!
Bless I rather use the 1 clip instead of 1 1/2 shaping up reason be the blend is more define and less touch up work than when you skip 1 and go to the 11/2 if am making any sense around the fade area a little bit darker because you skip the 1 for 11/2
Them wahl seniors putting in that work still. I love mines just hate the battery life. Picked up an onyx yesterday, hoping I get that same feeling just with 4 hours of run time. 😅
Clean 🧼
Thanx for vid i learned from too much
🔥🔥 can ya’ll do a mid fade but not skin. Meaning the first guideline will be done with either a number 1 guard or even .5 guard.
Most of our clients like skin fades but I’ll see if I can find a model bro
🔥🔥🔥
Love the tutorials! I’m a barber student been in school for about 2 months. Definitely trying to learn the low fade. That’s what my big brother gets.
Hell yeah bro you can do it just practice
Am switching all my tomb45 for your products !!!
🏴🏴🏴
❤❤❤❤❤❤❤❤
why you didn't use #1 this time?? Im confused... its been 7 month sice I started learning and im still having problem😅
I switched it up bro just for this video I like trying new ways and I look for new ways to make it easier for yall but by all means stick to what makes more sense to you and practice that till you build good muscle memory
i tell my clients not to look up because the lines on forehead when they look up makes it almost impossible to fade the panel on the parietal ridge area
Great video as usual, do you guys have a video on scissor pointing technique?
We explain it in some of our tutorials but what exactly do you have trouble with?
@@FADEDCULTURE Like detail work when you tackle certain darker spots on the fade using the tip of the scissors
🖤🖤🖤
💈💯👌🏽🔥
Hey bro do a Crew cut
What do u feel about taper blades vs fade blades?
I haven’t used the taper ones in a while tbh but they work good too.
Bro that guy looked stressed AF hope he's alright
Can you do a drop fadewith bulk behinde?
How many tooth of guard 0.5 do you use to fade line between 0.5 and 1.5?????
When’s that cape dropping?🔥🔥
I’m hopping by next week bro 🙏🏽
@@FADEDCULTURE bet, that one looks fresh!!!
which is better for blending, low rpm or high rpm clipper?
High rpm for fading and low rpm for bulk
Can yu do a black dude hair
Yeah we have a few tutorials on the channel bro
I gonna watch this, thanks 🦾🏴
My boy 🙏🏽
indonesia hadir
I get lost in the blending
When i take out the line with the half guard before the bottom line i feel like i always create a new line with no guard lever open any tips?
Don't dig in with your guidelines bro it's been mentioned plenty of times, and try to use your corners
honestly I never use the half guard fully closed, I always open it a little
You mean the top guideline? I take it out with the .5 at 3/4 and 1 guard at 3/4
Did you skip 1 guard open?
This time I did bro
You guys are doing it again… this is called a drop fade. Not a low fade. A low fade is supposed to be dark at the temple p and c cup area. You guys take to much of room and blending to high, and then calling it a low fade. This is disrespect to the barbers who putting in work for a compressed low fade. Next time i would like to see a real low fade. Not a mid fade or a drop fade. (The temple p and c cup should be dark without enhancements) 😄
That was mid drop fade
@@justforfuntvpett400 exactly. Not low fade
Post a video of you doing it so everyone can know exactly what you mean. Can you also include video voiceover. Thank you so much 🙏.
Can you post a video of you doing it or you just gonna talk shit?
Watch 0.50-0.59 on the video… the client literally said he didn’t want a c cup … you’re probably a shxt as barber hating on someone who makes more money in 2 days then you do in a whole week 🤣
En Español Weyes!!! Que no saben que en México tambien esta Sugerido su Canal??? De que me sirbe segirlos sino entiendo ni Madres