ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2016
- ATC 250R rolling chassis was $150. I sold rear tires for $75, swing arm for $80, rear plastic fender for $50 and rusty bottom end of the motor for $20. We ended up with half of the bike (front-end, frame, gas tank and seat) absolutely free and on top of that with $75 in our pocket.
Here is a list of items that we bought for this project. Another ATC 185s for $60. Handlebar grips from eBay $15, flexible exhaust pipe $18 from Orilley auto parts, Pro circuit exhaust tip for $50, white plastic side covers $30, Swing arm with brake drum (Honda fat cat) from eBay for $75, new brake pads from eBay $14.99, Rear sprocket (Honda fat cat) $12, Axle bolt (honda atc 110) was $10, red chain roller $5, chain tensioner bolts $3 dollars each, rear Tire was $60, Vinyl fabric $8, paint $16, Primer $8, 3M adhesive foam glue $8, Aircraft paint remover $10, flat stock metal for engine mounts $8 and flux core welding wire $16. and finally $5 decals or stickers (eBay)
Rolling chassis from atc 185s was also sold for $50. Entire build came out to roughly $300 not including all the elbow grease and hard labor my kid invested into this build. Thanks for checking out our video and God bless.
I don't understand why there's 3+thousand dislikes 🤔🤔,I envy anyone who has a relationship with their dad and who has a dad who spends time with his son, kudos man great build!
Hey Scott
Glad you liked our project and we appreciate you watching and commenting. Dislikes are from ATC lovers who consider it a sacrilege to cut up a three wheeler. It was going to end up in a junk yard anyways so might as well make something out of it. Cheers
It's probably feminist and s0yb0ys that down voted this video. I for one am glad that you are spending quality time with your son and teaching him some traditional masculine skills.
People are just miserable turds, I for one loved the video and what you made out of this ATC. Looks like a fun little bike!
Because cutting up an ATC 250r is blasphemous. It’s got nothing to do with the father son thing.
Honda ATC purists will say you're a bad person for cutting up a good wheeler. I say piss off, I'm converting a 1983 185s right now.
Hats off to you for having your Son involved. That's the most important. He won't be ready to ride that for a while. Good idea just adding the swing arm make it a big cat I like it. Now show us you ripping it up. Awesome job guys.
Something simple to do would be to reverse each fork so that the angle increases. Much safer . You can also increase fork angle by getting shorter rear shock
Agreed! Seems sketchy if you ever go downhill with it you'll be over the bars! Needs a slacker angle
So nice to see a Dad and his Son so close and learning from each other. Very nice builds also and other than some weld spatter not cleaned off your welds are good enough to strong. I only mentioned the weld part as you commented about your welding. I used to build and work on many projects with my Son something to this day he still talks about. Now Started building and working on projects with my 10 year old Grandson 5 years ago he is now 15. It has been so much fun but now I am fighting cancer so my days are about gone. But it's been so great the time spent with them both having worked with my Son and than his Son. What a fantastic life I have had that I am so thankful for. Thank You for sharing, Cheers
Thank you for sharing your thoughts and i hope you get well enough to complete many more projects with your grandson. Hang in there, never give up and stay positive. Appreciate your support and thanks for watching.
Very cool!! It was really well done, and very informative. It is also awesome that you got the son involved. You get youtube father of the year award.
Thank you sir for kind words and for your support. Greatly appreciated. Cheers
This was brilliant to see father and son working together me and my dad fix up bikes aswell I've gotta convince him to do something like this soon we'll done guys
+tomahawk224
Thank you sir for your kind words and support. If you ever build one with your dad, upload it to youtube, i would love to check it out. Cheers
+balabay77 this thing is bad ass
tomahawk224 2😇👅👅
That cheap air filter with no box is going to give you problems in dust n mud. Very cool build. I remember the original Yamaha 350 fat cats when they came out I was 8 years old. I had to use a crate to get on it. So much fun.👍👍
Recycle when you can...as they have said for decades.. the purists can restore as they wish and do a great job of it when words turn to action. You are creating a new craze... keep up the great work and video detail.
Man you really know how to do shit,that was impressive man👍
Looks factory from Honda. Good job guys.
I've got a 70's 125 cc trials bike I'm wanting to do a fat tire build with, so I can make it a hunting/ TEOTWAWKI bike. Motor runs good but the Trials frame is done. Plan is to put the engine in a XL frame and build a wide swing arm and front triple tree for a ATV forks set.. Now I'm all inspired again. Well Done and a great bonding project for you two. A shorter rear shock would get your steering angle closer to 72 degrees.
I don't understand why 3.9k thumbs down 🤔🤔🤔🤔??????? Well to those 3.9k thumbs down must be jealously..... Im glad a father who did a paitence time and did a project with his own son to keep him outta trouble and off drugs that's a good father right there 👍👍👍👍 awesome project and a beautiful bike😜😁👍
Your Son is very Lucky, he has a Super Dad!
Thank you for the kind words and I appreciate your support. Cheers
jeg søre en venner Lindholm lars
Batmmannn tth23
Lis Haratmann j1
Batmmannn
Awesome job but better yet you had your son working with you. Bet that is something he will remember for a long time.
Indeed. Thanks for sharing your thoughts and supporting our project. Cheers
hh
mul
gamı feat
Paul Ogea ho
👽💩👻👽😚😈💩👺😺😺😺👾👺👾👾👾👾👽👽😺😧
i really like it but what i really like is that you did it with your son thats valuable
Thank you Sir for watching and commenting on our video. We are glad that you enjoyed it and supported our "father and son" project. Cheers mate.
Welds aren't crappie... no negative selt talk bro you did an awesome thing with your son
awesome bud..that thing is super cool...
Thank you sir, glad you liked it. Cheers mate.
bkl 420 mmuch
no prob man I wasn't bashing on the idea it a hell of a cool idea but in the parts of US were I am they have always been rare and I would kill for one
Its Ya Boy Panda aqa***_¥. Mmn t'm j nbq
Y
Make one from a old rokon
All these projects you do with your son are really cool. And they don't cost the earth witch is a bonus keep em coming...!!!
+rustynuts686
Appreciate your support and thanks for watching. Cheers. Like your username. 😀
Outstanding job, thanks for posting this up for us.
crying it's is beautiful
thanks for letting me watch the video
titania banks
Glad you liked it and thank you for watching our video. Cheers
Jashawn Nathan
jah2 raw íik mmmnnnn0899
Mn
one of the best projects I have seen in a very long time, and the father and son matched it up better then any video ever, You have inspired me to do so with my kids. I have a 3 WHEELER and this is awsome. Thank you very much, you never know what could happen in a video
Thanks a million Craig for kind words. Glad you liked our video and I hope that you and your kids find time to work or your project. Cheers
THANK YOU, And yes we all ready started lol
Awesome Dad, your son is very lucky to have you, & no doubt your son will be building amazing machines in his time also. Great video ......
Thank you sir for sharing your thoughts and supporting our project. Hopefully my kid learns enough skills to be independent and creative when he grows up. Cheers 😀👍
Yw
These are extremely cool projects, but I admit that I am sad to see the ATCs being cut up.
+Renegade Maine I was just posted the same thing i owned one super fast but nothing but issues..
burnedatbirth د
Ali Neama llohgwthht
awsome ill drive it
No
best part of the build dad and son. you don't see much of that these days.. awesome
Thanks Jon for supporting our project and sharing your thoughts. Cheers
balabay77
balabay77
Raveena Kaur Singh
Jon Wright m.
Great job and also letting your kid do some of the work great job.
this is probably the best project ive watched or seen on the internet.. wish you were my father haha jk
Thank you very much but you are giving me too much credit here. i just wanted to see if it can be done and after this project i can safely say that anything is achievable. Thanks a million for watching and commenting.
jjifo
а
,,w
Riley Pilot
Looks like that the rear supension is too long...
+Mukunda Das
Yeah, i will look for shorter mono shock.
Thats a very nice ATV. If you want to make it safer and easier to handle, rotate the fork tubes so the front axle mount leads the fork tube instead of trails it. Thanks for sharing your project....
For sure. I was thinking of doing that soon. Just have to buy longer brake line.
Фантастика!Как всегда как на заводе,получилось!Евгений вы просто супер!
Ну ты вообще расхвалил. Спасибо тебе огромное но эта хрень только на картинке хорошо выглядит а так набор старых запчастей. Чёта сильно долго я его собирал. Ни чего не подходило и пришлось схимичить. Зато получился очень дёшево, в данный момент в $350 а если продам чёрную раму на выходных то ещё дешевле. Надеюсь скоро и твой байк увижу? Удачи. Ели чего то пиши на фейсбук.
На днях куплю камеру!У нас 100 долларов ранее стоил 186000 тенге!Потом стал 386!А сейчас в обмениках стоит 343-344 тенге!
Ваще экономика в ауте у нас!Теперь!Зато втапливаю по городу 70км час!Во всю катаюсь точно как вы!Блинннннн Евгений были бы вы мойм соседом!Или жил бы я в Калифорний!Как жахнули бы что нибудь,как тот Трайк,на заправке у вас!
Меня недавно копы поймали:)повезло отпустили!Пригразили что на штраф стоянку заберут аха фиг им!
+Талгат Урбанов
А ты в следующий раз сделай вид что не тебя останавливают и чухни дворами к себе домой. Думаю будет им обломно гоняться за тобой и махнут рукой на этот беспредел. А вообще лучше найти место как например поле или пустую парковку и там гонять. Удачи тебе.
Very cool project!!!
+Craig Arndt
Thank you Craig. Took me several months to go get it running but i guess it was worth it. After i sold all the extra parts, this bike came out to $300.
+balabay77 seems so slow but great build
Dhvxxznsfj vxmxg ietuehwjfwhgshdfdjhrgcfhxhzvsbxgdgdjdfdhdfehdyx dhdhvdhdcdjsf wish you a very happy birthday to you I uu you to the best of my love and hope you are doing well and I hope you are well and you are hdjshnsnzn, a lot of the work is going on at the moment but I am not sure if you have a copy of the letter you sent me and I will send it to you by email as I am not in the office today
+daniel hayward ' 6y😈😬
Crai
R304 silencers are for 2-strokes btw
Thanks for the info Jason. I've used whatever was available at that time just to wrap up this project. Junk builds tend to have odd parts on them and sometimes they end up looking cool and unique and other times a head scratcher. Cheers
+balabay77 Whatever works, the bike catches the eye though, nice job.
+Jason Jaeger
Thank you sir. Appreciate it.
MZjvC😡,😢😧😢😮😢😴
+Valza Zogiani I'm in my 30's so I have absolutely no clue wth that means. Use words, not ridiculous emoticons.
Awesome, bow to get the bugs out of it. Soften the rear spring pre load by unscrewing that big nut on to of the rear spring. And get a new set os bars. Those bent ones are ruining the ride. Maybe a valve adjustment as well.
nicely done. and getting your son involved is priceless.
Mike Schmidt
Thanks for watching and commenting, we greatly appreciate it.
The shock isn't moving at all. That ain't good
Hi😄
Costeimuintoparacempre
The saw beast Flight
The saw beast Eli.ھدججبگکفم
ہہہہہہہہہہہجئھفطھدطھ
جننفد دھفدھد
My parents had a white & blue Honda Fat Cat 200 when I was a kid. I had an RM80 at the time, that fat cat was fun to ride for sure though. Really cool project, brought back memories seeing this bike.
Thanks for sharing your thoughts and memories. My junk build was made out of several bikes including Fat Cat. Cheers.
Yours turned out awesome, looked like a brand new bike when you finished with it. Funny story, the first day my parents bought theirs when I was about 11 or 12, we went to test it out in a field locally where a couple other friends was riding. When I went to test drive it, I ended up flipping it end over end about 8 flips. It wrapped the handle bars around the tank, broke the front and rear fenders, and bent the forks lol. Luckily all it did to me was knock me out and chip a piece of bone out of my shin. I still got a dent on my shin from that day. We got it fixed and had it around for years.
+TheAmericanUhate
Dang that must of been one heck a tumble. Fortunately you lived to tell about it and the bike was fixed. Glad it all worked out.
TheAmericanUhate bnkododowmnkLOddzpzpzozzkdkdlslsslskdkdldldldldldllsldkddkdkdkkdpdodldodddex z 'sspwowowoqoqqp
awsome videos! am building one of my own right now two wheel drive, very helpfull to see your concepts! u could easily change rear hight by extending lower shock mount up and towards tire if flipping front fork does not help, will also change leverage on shock and soften it up a bit.thanks for posting looking forward to see more.
bc trails
Thanks for your suggestions and glad you liked our videos. I was cutting corners with this project and building it on the budget. If I knew that it would get so many views I would of made it much nicer but it is what it is. Anyways, good luck with your project and upload it once you are done with it. Would love to check it out. Cheers mate.
you bet,thanks i may need it lol,happy trails.
Fehn
foqiu
patrick moreira ههه٨ه
só anda em primeira
Monstrão Camargo
This is absolutely fantastic. Excellent craftsmanship.
Good for you helping your son do a project
LOL He said that he couldn't of done it without me. Thanks for checking out our video.
or give me info on it
big Bill p
big Bill
big Bil
hjeudj
Semi Auto
jake
Moto Buddy
Victoria Matbagon vvvbbvxzhh,V ,:
Moto Buddy x
Yes
Great job on the bike you must be a fabricator keep up the good work both of you
Just a little advice, you should lower the rear shock a little. Also take the front tire off then loosen the bolts on the triple tree and turn the forks around! It would make it more like a dirtbike and more stable!
Good 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏, 🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅🙅
وووووووو
Bente Kirstine Benedetti
الاه
Bente Kirstine Benedetti ex
c m
,
Frank Bennefield ashehyrdf
lla
3
23
sod8sosodododod828so
bachar hamid r
Awesome job the forks backward is hurting my brain but again go dad Awesome build!
other than the rear suspension geometry being off, it really is flawless build that can easily be remedied!
👍🏼
Aint1S
If I knew that our project would get so many views I would of made it much better. Glad that you liked it and I'll try to lower it with shorter rear mono shock. Cheers mate.
.
cfouo proto
Amber Montgomery uidjdjdjdjdj
barbara walker hrjdidieidhdhdhdiididii
Tina La Mazza hjj.
ķö
Amber Montgomery pp . How h
HnnnaQp
ahmet bağırtlak b
+Lotfi Solaiman com 2u7w82k3nene
My fovorite part of a dirt bike is the gas tank and the engine
I'm glad you're working with your son y'all do some good work man keep it up
+Zion Cook
Thank you sir. Trying to keep my kid busy and out of trouble. Appreciate your support. Cheers
Cheers to you as well balabay77
Role the front shock tubes around place the front wheel in front of the forks will make it easier to control on the rough. Soften the rear to make it a much nicer ride. Other wise it’s an awesome job.
Really Cool. Awesome father & son project!!
no problem man I enjoy seeing people think out the box and doing the things I also like to do build stuff
Way cool. Nice job having a vision. Wish I had a dad like you. Thanks for sharing
Thank you Devo for kind words and appreciate your support. cheers
What a great father son project. I am thinking of selling my 85 Honda 250SX and getting a fat boy or cat. You guys did a great job.
I had that year 250r , I flipped the forks on mine so the axle is up front of forks , you need a longer brake cable to make it work , very easy to do
+Harvey Hudspeth
Thanks for the tip. i might try to do that when i get a chance.
This is one of my favorites that I've seen so far!! Great job
Thanks a million sir for your support and kind words. Cheers
+balabay77 what kind of swing arm did you use?
Swing arm was from 1986 Honda fat cat that i got on eBay for $75.
Good❤Bonding between Father💙Son.. Amazing💡Job.👏👏👏
Nils Ottesen
Thank you so much. Glad you liked our project, appreciate you watching and commenting. Cheers 🍻
Its Jake from @ and a half men! LOL Thats a compliment kid....nice machine
Also painting that rear swing arm with a Honda silver would really help it stand out a bit more.
Very cool build, but i would suggest a few things:
It looks like the rear shock was mounted in such a way that it perked the back end up way too high. The swing arm should be pretty much parallel to the ground. Using a shorter shock, or remounting it to allow the back end to drop, would 1) drop the back end and get the swing arm to lie more parallel to the ground 2) fix the over-steep front end, giving you better handling, and 3) it would drop the whole bike down lower to the ground, which would lower the center of gravity, improving handling. Plus, the resulting lower seat height might make it easier for your son to ride.
But yeah, cool build. I love fat tire dirt bikes.
Thank you for sharing your thoughts and yes i will still do more improvements to it including dropping rear end by several inches as well as fixing rake and trail. I tend to cut corners on my junk builds but this bike deserves more attention and love. Thanks a million for watching. Cheers
Your the kind of person I see at a meet with your creations and I alwase have to think did that come like that straight from the factory? You and your son do an amazing job making these.
+MIKERPOTATO,guns,games
Glad you liked it sir. You are giving us too much credit here. Its greatly appreciated but these projects are nowhere near factory condition. I try to get my kid involved in these projects to keep him out of trouble. We both learn new skills as we go along. Had no idea that these projects would be so popular on YT. Viewers like you inspire us to make more projects. Thanks a million and have a great day.
Need to bring the fat cats and other big wheel bikes back, still a market for them not sure why they ever stopped making them. But they need to come back. It is a true ATC (all terrain, cycle), bring them back!
Nice build. Two things you can do on the cheap to fix the way it rides and looks, turn the forks around so that the wheel in mounted in front of them and get a cheap ebay spring for a 125 dirt bike on the rear. That will help with the fork geometry and hopefully you won't go over the bars.
Love your conversion, They need to bring back the fat tire bikes like the Yamaha Big Wheel and Honda Fat Cat.
John's Cribb
Indeed. They were unique trail bikes but I guess not fast enough for any type of competition. Thanks for watching our video and glad you liked it. Cheers.
I know
Thanks for the inspiration to do this with some old 3 wheelers I have , looking forward to the ride
way awesome! . I suggest making a mudflap to go in front of the rear tire. between the tire and air filter to stop mud and water from getting sucked up in the carb.. and keep things cleaner.. but nothing bad to say at all. Very good job
+aquahaulic96
Glad you liked it. i was actually thinking about that and wanted to shield off the air filter from mud and water. rear tire kicks up a lot of dirt. Your suggestion is duly noted and thank you for commenting and watching my video. Cheers
That’s one of the best looking builds I seen.
GREAT VID!!! The bike is secondary to me. It's great that you and your son did it together!!!
I love my 85' 250SX. I would love to build a bike like yours!!
much respect!!
I agree with JaseH1. When I watch your great work with your son, I see him in the near future starting to build his own rigs. I have watched several of your videos and I see him growing, and also doing better work. It shows in his paint application, how he does a better and better job of applying the paint in the base layers. Fabricating the rear ends is also great for him to see you do, because that cements in his mind the fact that he can also do it. Maybe he will build a Rock Hopper in a few years, and you can mortgage your house to finance the engine :) lol. Ahh, the long-term consequences of getting our kids interested in fun projects. On the other hand, you can make great money building bikes like you just finished in this vid. It is a great back-country trekking machine - rigged, quiet and if it has sufficient torque, able to carry a man and a weeks gear up steep slopes and deep into the back country. I want to build one. Where do you get the swing-arms and hubs?
Jerry W Davis
Thank you sir for kind words and glad you enjoyed our project. Trying to teach my kid new skills and hope that when he grows up, he will fondly remember all the quality time we spent together on these projects. Found swing arm and rear axle hub with axle bolt on eBay for $75. Thanks for watching and commenting. Cheers.
That's great I aways love watching your builds. I wished I could find some of parts bikes like that here. They are really hard to find here. It has been fun watching your son grow up each build you guys do.
Thanks a million it means a lot to us. Who knew that bike builds can get so many views? Even though we don't make a whole lot of these projects but I try to get my son involved in most of them. Have a blessed day and thank you for watching.
Very cool, I like it. I would agree with some of the previous comments about it needing more rake. If you changed the rear shock angle (so it sits a little lower in the rear), I think that would take care of rake and seat hight issue. Cause I'm sure your son would like to ride it after helping on the project. Would like to see a off road video.
Hello Royce
I will look for shorter mono shock to drop rear end maybe 2 inches. I'm hoping it will take care or the rake and trail issues. Here's off road video th-cam.com/video/k-C-BeEXRzw/w-d-xo.html
Thanks for advice, for commenting and watching our video.
that looks totally legit, and you made it into a relatively safe 2 wheeler !! Very nice job fabricating !
Hi Bruce
Glad you liked our project.
Thanks for watching and commenting. Happy new year.
dude that's awsome building your own old school fatkatt
Thank you sir. Glad you enjoyed our little project. Cheers
Cool transformations.
AWESOME BUILD
Bloody good job . Well done
That camaro in the back was noice
it would be awesome and other people should love it... take all the parts u have laying around and make something no one would expect
That's a good idea. Maybe when I have more time I will fabricate something unique.
thanks cant wait!!!!
Nice and quiet too .
Awsome work!
WOW, that thang is a huge bag of AWESOME!! Why, the big wheel bikes didn't take off is beyond me. HELLO HONDA? THIS IS THE BIKE YOU SHOULD HAVE MADE!! lol The originals sat too low to the ground IMHO. Great work my man!
Glad you like it. Thanks for commenting and watching our video.
Hold my 🍺! That's some impressive engineering.
rentcda
Thanks. Glad you liked our little project. Cheers
this is the coolest thing ive ever seen... great job
+Flying V Riley
Thanks a million for kind words and your support. Glad you liked it sir.
Nice deathtrap build. You should pull the engine and install a busa engine on it. Take it to the drag strip.
+Kool MaDa
I like how you think but the engine from hayabusa will snap the frame in half. Challenge is accepted. Cheers
really nice paint job there fellas. what a neat build
+Mitchell Steele
Thank you for kind words. We might powder coat our next project for better looks and durability. Thanks for watching.
balabay77 bbbbhhhvv🚒🚒🚒🚒🚒😂🔼💛🌐🌐🌐💚🙃😎😜😎😎😎😼😼🙌🏽
dude, sick job on the build, love it man. hope my 350 project come along as well as this one did.
jerimiah walters
Thank you sir for kind words and for watching our video. We made this bike out of junk parts and had no idea that we would get so many views. One you finish your project, upload it to TH-cam we would love to check it out. Good luck with your bike. Cheers.
Nicely done . The fat cats werent much chop off road due to the narrow rear wheel that you have used . For your next one use the atc rear wheel off the which makes them virtually unstoppable
+Eddy Eagle
Will do Eddy. Thanks for your support and advice.
Amazing job boys
great work. awesome job.
brilliant transformation well done!
jnvu
what?
Liam Harrison
Thank you sir for watching and commenting. Glad you enjoyed our project. Cheers.
That track is fire at the end
the first
love it bud! nice job and good learning experience with your boy!!
Tommy T
Yes sir it was a blast working with my kid on this bike. Had no idea that our junk project would get so many views. Glad you enjoyed it and thanks for watching and commenting.