ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 7 ม.ค. 2024
- I Built this DJ Podium for less than $500. I used the Following material:
1 Sheet of 1/2 inch OSB (Not Recommended - USE Plywood)
2 - Handprint 1/2 in. x 2 ft. x 4 ft. Radiata Pine Plywood (Actual: 0.469in. x 23.75 in. x 47.75 in.) Project Panel
1 - 3/4 in. x 2 ft. x 4 ft. Radiata Pine Plywood (Actual: 0.719 in. x 23.75 in. x 47.75 in.) Project Panel
2 - 1 in. x 6 in. x 8 ft. S4S Standard and Construction Premium Kiln Dried Hem-Fir/Douglas Fir Board
Adjustable Feet for bottom - Shepherd 1-1/2 in. Beige Round Felt Threaded Stem Furniture Glides for Floor Protection (4-Pack)
Hinge - Everbilt - 1-1/16 in. x 12 in. Bright Nickel Continuous Hinge
Amazon Items Below
Laptop Stand -
VECOFO Laptop Stand for Desk, Ergonomic Aluminum Laptop Stand Adjustable Height from 7-15", Sitting and Standing Laptop Riser for 10-17" Notebook (Black)VECOFO Laptop Stand for Desk, Ergonomic Aluminum Laptop Stand Adjustable Height from 7-15", Sitting and Standing Laptop Riser for 10-17" Notebook (Black)
Latches - E-TING 6-Pack 4001 330Lbs Holding Capacity Adjustable Toggle Latch Clamp Smoker Latch Clamps 150Kg Quick Release Pull Latch +24 Screws for Various Tool BoxE-TING 6-Pack 4001 330Lbs Holding Capacity Adjustable Toggle Latch Clamp Smoker Latch Clamps 150Kg Quick Release Pull Latch +24 Screws for Various Tool Box
GUNKING Luxury 2-in-1 Anti-Spill Cup Holder with Under Desk Headphone Hanger (White).
Assorted 1" pocket Screws , 1-1/4 building Screws, Gorilla Wood Glue, White Satin Glossy paint.
The total time it took me to build this podium was about 3 1/2 days.
the total Dimension are 40"W x 26"D x 39"H
For more information drop a comment and I will answer what I can.
Knob is to hold cable from it getting pulled out
I'm in the process of building my own so love to see the creativity...
I'm on the fence because well I absolutely appreciate the ingenuity and building something yourself and saving thousands of dollars... On the other hand... Like you said in the video you built it over a weekend... And it Looks like it too. It's not bad, it's just everything looks kind of rushed thrown together. Super fast and not really embellished to give you that pro look .
Only thing it would take is smoothing out some rough edges, throwing on a fresh even coat of paint and that's really about it bro 👍🏾
I really Like your booth and it looks light, I will try to get my carpenter to build it for me
Awesome booth
the knob you speak of is strain relief for your power cable.
Congratulations, great job ! Getting ready to start my project :)
Did you used a router at all or any special tools besides the pocket hole tool ? I’m pretty new at wood working 🤦♂️
I only used a Table saw, a Miter Saw and Drill and Pocket Hole Jig (Kreg). I had some of the wood cut to length at my local Hardware (Home Depot) Store.
Keep it up.nice one.
I like the booth but, please dont put DJ on the front of it. I would hope the people your in front of know your the DJ already. Just some friendly advice.
Love your build and have a few ideas for tweeks. Can you send me your blueprint sheet for stand? Going to see if i can make my build in a weekend too. Thanks
I did not use any type of blueprint. I just designed it from something I drew up on paper. But I will try and send you more information on the dimensions I use. I hope that will help you.
I'm working on mine
Very very nice . I have flx 10. My idea is to put the laptop inside the column and put a usb c monitor in front of flx10 just to made a custom stand alone like opus quad. What do you think?
I think your idea is awesome. It would be great to have a high resolution screen to see things more clear
Great effort, good for you for saving yourself a lot of money, and it looks great. personally, I think the mobile djing movement has become a joke with this podium trend, now we have to be carpenters too, and bring a kitchen counter to events just to look good. you have to admit, it is getting out of hand.
Excellent job what model or brand name is that cup on Amazon?
here is the Link
a.co/d/8patNKY
I hope you find it...works great.
@djazh2o Thank you sir much appreciated
Are you building these for DJ’s, or would you rather not? I’m not a builder, but what love to have one for my Pioneer XDJ-XZ, or my Pioneer CRSS 12’s with an S11 mixer. Lets me know please, thanks
I just built this for myself. Although it Looks hard, it is very simple and Only used a few tools. When I build my next one I will try to Video it to show how I put it together.
But thank you for your comment.
Hey DJ , luving your work i have 2 controllers the 1000 & DDJ-sr2 would luv to build 2 podiums for each. would luv to hear from you. thanks (dj waveland)
I was thinking, you could make swappable cutout tops for different controllers rather than have multiple podiums.
Cool but controller are in to different places
@biggecaps the custom swappable top would be cut for the shape of the specific controlker. And perhaps inside have lareger velcro areas to accommodate the possible locations of different controllers'feet.