Where you should Start Installing - PART 2| Laminate Flooring or Vinyl Plank Flooring
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- This is the 2nd video of this series. In this video we are going to continue the layout for a Laminate Flooring or Vinyl Plank Flooring Installation. If you are planning on installing your plank without transitions, this video series will show you how to plan for that.
Here are the links to tools I use. If you use these links I do get a commission and my family and I thank you very much for your support!
Entire Home Plank Installation Video - • SIMPLE to Use Step by ...
Tools and Supplies I recommend in this video and use everyday- www.sothatshow...
iRobot Roomba S9+ Bundle - amzn.to/3lxrZas
iRobot Braava Jet M6 - amzn.to/3agLamH
iRobot Handheld Vacuum H1 - (coming soon)
Bissell Crosswave - amzn.to/3ME3ep8
my website - www.sothatshow...
This is where you will find all the tools I mentioned in the video
my facebook page - / sothatshowyoudothat
While you are there hit the like button!
Laminate University - www.sothatshow...
![[FAIL PROOF GUIDE] for Any Size Vinyl Plank Installation|DIY Friendly](http://i.ytimg.com/vi/6eZHHSzI7Qo/mqdefault.jpg)
I remember I was about to start my first ever laminate flooring project in a friend’s kitchen a couple of years ago, admittedly very nervous & your video series, especially the tip on how to lay the tilt & click flooring in a space where tilting wasn’t possible, in my case, a refrigerator alcove, literally eased all my anxieties about that project. I can’t express enough how much I appreciate you and those who take the time to teach the rest of us who may not be so skilled. Thank you! Stay blessed.
Joe, I followed your recommendations from your previous series on my installation and it went amazing. I had never installed flooring before but our vinyl plank looks great. The guys at the flooring store even scoffed when I told them that I didn't want any transitions. Thank you Thank you Thank you!
How if the walls in your hallway and not strait how do you get a center line?
I have done a few laminate and vinyl plank floors. I just finished a job after watching this, and quite a few other videos of yours. This job was the best, the easiest and would have been the fastest, if it was not also the largest.
It is well worth a person's time to watch as many of your videos as possible before undertaking a flooring project. I am very grateful to you Joe, for what you have done for me with your channel.
I will pray for your continued success with this channel and everything you do.
That is very nice of you man!! I appreciate you!
Thank you for these videos I just landed a over 3000 sq ft job wish me luck
You can do it!
Man you have inspired me to redo my entire house flooring! Thank you for all the tips
On your 2017 video on "where to start", you measured your line from the wall baseplate of the other room. I tried doing that but there is no way it will be straight from the hallway line. So I scratched that method. Good thing you corrected yourself here.
Drilling
First
A laser level's vertical line can show the long straight line.
Very true! But I am showing this to people who do not have every tool that I have in my trailer and another $150 tool is not gonna happen for most. So , I share how to use a $3 stringline.,
I watched your flooring videos dozens of times before and during installing strand woven solid bamboo without transitions throughout my downstairs. It went well and looks great. I guess I rushed and got a little careless with underlayment/leveling towards the end and have a few “squishy” spots. Is there anything I can do at this point?
Yes. can you share some pics on my facebook page? There is a link below.
I've got a question and I don't know if it's too late to get a response but do you have to run the hallway like that or can you turn the boards sideways so you only have to cut them all for the hallway
Where do you get that chalk line from? Do you like the Pergo Outlast line from Home Depot? You are a wonderful teacher. Thank you sir.
Awesome video Joe! Great content and excellent job communicating it. God bless you :)
Pure Genius.,,,,,thanks for sharing Joe,,,yep, and even those bloopers.
It’s like listening to Seth Rogan tell me how to lay flooring. Cool videos. Thanks
When installing flooring on concrete floor with vapor barrier how do you do the layout? Lots of tape?
If we're alone while doing the job.... Can we use a laser level in place of the string?
Just finished my entire house with no thresholds…
Thanks for all your tips… especially the starting in the hallway layout trick, the starter strip last trick, and also cutting the front of the refrigerator panels, that was huge…
The whole house stayed perfectly square… and got around the island with no issues… I also used quarter round at the exterior doors rather than the thresholds…
-I hope the best for you and your family… I can’t thank you enough👍🏻
Measuring off the sill plate to extend your center line seemed extra at first since you're just going to use your original snapped line anyway as a final guide anyway, but seeing any differences from your mark will tell you how crooked that last wall row will be, and that's what a short cheater board trace will help with!
We have a foyer. Is that the “hallway” where we would start?
Awesome info 👍very helpful
Thanks pal your giving away gems!!! Your videos have been the go to for any questions and your tips and tricks are Outstanding!!!!
Thank you!
I have a question. I did the kids room last year and we want to do the rest of the house now. Where do I start? From the kids room out? The kids room is in the middle left of our house.
I would like to see a drawing to better answer. Have you checked out my membership site? www.sothatshowyoudothat.com/laminate-university-registration/
Outstanding explanations not only what to do but WHY! THank you so very much!!
No problem!
did you sand down high spots and use drywall mud for some low spots? my house has similar layout of very large rooms tied together and then master bedroom at end of hall, so they will be running down a long distance of almost 45' - video very helpful on spacing out the starting points.
I used Ardex feather finish to fill the low spots.
Weird question but I have been looking for a side tool belt like yours. Like a single pouch with multiple pockets. What kind of tool belt son you use in the 1st 2 vids in this series?
Watch this video and there is a link in the description -th-cam.com/video/Ts1_sCOHm0w/w-d-xo.html
What are you meaning by no transitions? It that a reference to changing directions with the planks?
Yes
Where is part 3? Your other videos never reference the chalk line again...
Mandy, I have not made that video yet. But, if watch this video you will see the next steps and there is also a lot of other really helpful tips for you. This is a great video!
th-cam.com/video/6eZHHSzI7Qo/w-d-xo.html
Is there is a third video to this series? or a video where you talk about how to transfer the main line to different rooms? Very helpful so far!
Yes, but I have not posted it on youtube, it is on my membership site - Laminate University.
I have my hallway figured out perfectly, but if I'm going to match up to the hallway from the room I'm starting in, I will have to start with 1 inch wide pieces in the back of starting room. Is that ok or should I try something else?
that will work. Just put a few drops of glue in the joints of the one inch pieces to hold them in.
@@SoThatsHowYouDoThat thank you!
so what do you do when you want vinyl thru the whole house and have multiple doorways in the hall, i started in the den and i stopped the job and cut the ends off to the hall way i want to get away from all the transitions so im pull those pieces up and continue the flooring from there, but there is a hard surface tile so that piece will need transition and a closet in the hall way the straight forward is a bed room and at the wall of the bedroom the hall goes to the right and goes to bathroom on same wall and another bedroom on the end of the hallway .
i already started so i dont have any reference lines am i screwed?
share pics and a drawing on my facebook page.
thnks plan on doing my home soon def watvhing
You’re welcome 😊
I've watched most of your videos a few times now. They are great! I may have missed something though as I'm not sure what to do if the measurment from the wall of my room is wider at one end than the other. Which measurement do I use to make the chalk line? (my room is roughly 28' long and 11' wide at one end and 10' wide on the other end). (Or my other senerio is that my room is L shaped and I want to find the center of the room). Sorry.. I'm really new at this. :( I should also add that I'm installing the laminate in the basement .. 2 rooms.
Nancy, can you share a drawing on my facebook page? I can better help you there. There is a link in the description below the video. You got this!!
@@SoThatsHowYouDoThat OK.! 😊
Thanks for sharing! I am learning a lot.
Glad to hear it!
Is it Joe or Joel? Great video again!
It is Joe
If you measure off of the outside wall to get your measurement, you cant ensure that your line will be straight. js.
make that hallway line from end to end and only measure off of that ONLY toward the outside walls.. this prevents any non-square outside walls wont throw off your measurement.