RODE WIRELESS GO II UPDATE, 32 BIT FLOAT & BEST SETTINGS
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- Buy The RODE Wireless GO II : bhpho.to/2OYvsSm
SALUTE LUTS (20 Creative LUTS) : sellfy.com/tem...
MERCH!!!!!!!!!! teespring.com/...
BUY The Gear I Review, Recommend & Use HERE: www.amazon.com...
Use these links to start your free 14 day trial PLUS you'll get 2 FREE months added to your subscription when you sign up using my links
ARTLIST: artlist.io/art...
ARTGRID: artgrid.io/Art...
INSTAGRAM : / the_everythingman
TWITTER : / everythingtem
All Business Inquiries : TEM@1TwoMedia.com
Affiliate Disclaimer: Some links mentioned in the description are affiliate links for Amazon and/or B&H Photo
RODE WIRELESS GO II UPDATE, 32 BIT FLOAT & BEST SETTINGS
So …. There have been a few comments about the 32bit audio … it is upscaled from 24 bit. I wasn’t aware of this until after this video was made.
The external backup audio in my opinion is still much cleaner than what is recorded directly to the camera.
So it doesn’t actually have the dynamic range of true 32bit float?
I was about to ask you about that. So it's not "true" 32BF (yet), but just to clarify- you were able to recover those blown audio peaks because the on board uncompressed 24bit was cleaner than the overloaded camera preamp? Also- if the input (course/fine) only affects the signal strength into the camera preamp, how do you control the input level of the mic into the onboard recorder? This has me stumped, but I'm crossing my fingers that Rode has some kind of "smart" engineering to make it a safe input level so you don't have to worry about peaking the onboard recordings. Thoughts? Thanks man, awesome video! Subscribed.
So obviously you need to take down the video. The real test of TH-camrs is whether it's all about hits and (chump change) revenue, or actual facts...
They added a "pad" mode for lower sensitivity.
Unfortunately the goii don't record in 32bit float. You just can export the 24bit uncompressed recording to a upscaled 32bit float file. If the 24bit recording is clipped you can't fix it in post like a 32bit float file
So the 32 bit float on these is not REAL 32 bit float. It’s still recording in 24 but when uncompressed then it “upsamples” the audio when exporting as 33 bit float. This does give the audio some wiggle room but can still clip to the point that even this process can’t save it. Multiple people from sound engineering sites have tested and confirmed that they can clip audio on the rode that exporting to the 32 bit float can’t fix. That SAME audio run through a device known to have real 32 bit float did not clip. I have been able to duplicate this myself using the zoom F6 and F2. They know that your average person will never realize this.
Is this still the case? Where is the data that it isn't real 32bit float? How much effort or sound did you have to produce to get it to clip? Have you confirmed this with rode?
If that’s the case, why were his two examples so drastically different? One was clearly clipping and the other was not
FYI, 32-bit float isn’t live yet. You can read about it’s future implementation on Rode’s site. Thinking you just adjusted 24bit audio and were able to recover it.
I've been looking everywhere to find out if this was in the works. any chance you have a link??
I love your combination of dry humor and helpful information. It's the perfect balance. Thanks for always making me laugh/smarter. Have a great weekend.
It can export 32 floating bit but it´s recorded at 24 bit... In the end the file will have only 24 bit dynamic!! It´s a "clickbaite" feature!
what has given you a far greater ear and appreciation/understanding of accents (primarily evidenced in this video, Australian, Scottish and English, yes you said English not British, which is already a win) than the vast majority of those in the US?
Pity there is no app for the iPhone or iPad to control the settings on the go, I never take my laptop with me on a holyday.
🎶I need Everything!🎶
Your HAIR STYLE like korean pop star
😂 it’s just bed head !
Thank you so much man, you're the ONLY one that actually did anything showing the 32bit float capabilities. I was really trying to find something on it. Great content as always, salute!
Entertaining yet informative! Damn best tech channel on TH-cam!
Im not 100% but I think its not true 32bit float. Its upscalled on export - Audio Export Modes - WAV 32-bit float: This exports an upscaled 32-bit float format file.
This was a life-changing review, I was deciding between these and the Zoom F2 bt, and it's insane, how the Zoom, while offering 32 bit float, doesn't allow audio monitoring, only visual monitoring on the app. The rode wireless go, I wish had a locking 3.5mm jack, but beyond that, it seems like the best bang for your buck. Awesome job, awesome review, and you're hilarious. I'm subscribing!
Great video. I've had the GO II for a few days now, and I love it. Thanks to your video I learned more about the settings. In particular the RX. And thanks to your humor, I'm now subscribed.
Those dialects! 😂😂😂😂😂😂😂 I have had mine about a week now but totally missed the 32 Bit float setting!🙏🏾
This is actually exciting. Thanks, man!
Thanks Jennifer!
Great stuff as usual bro. Stay up! 💪🏾
Thank you bro
Hey, thanks for the heads up on this man! Random question, are you/were you a hairstylist/barber? Just curious from the way you’re holding the shears in the thumbnail.
Haha I am/was for a long time. I owned my own Barbershop and sold it to do this full time
@@TheEverythingMan NICE! I’ve been a stylist for about 26 years and owned my salon for about 20. I’m about to go full time on TH-cam too! I haven’t seen any other stylists that were really into the videography game. Typically just talking head videos with a ring light. Great to find you here man! I’m digging your channel for sure!
That’s awesome man … same here I was cutting for over 20 myself and i wanted a change. Not I just cut my own hair and I refuse to cut anyone else’s haha.
I even let my NY & PA licenses expire just to make sure lol
Even though I don't know diddly about audio recording. this will help me so much when my RWG2 arrives. Wish I knew how to sync video and audio, sigh. Thanks, really appreciate it!
Aussies have been good about Covid, so they don't need quarantines, ever, ever again. Never. That's how they did it.
Nice save! So would you say that if it’s exporting and 32 float from the transmitter that it really is recording in 32 bit float like some of the new recorders from Tentacle and Zoom?
I don't think so I've looked at the tech specs on Rode website and in uncompressed mode it is still 24 bit. So not true 32bit even if you export in 32bit it still is from a 24bit recorded track.
And I've been testing it myself and when it's clipped it's clipped. I was in compressed so I might try in uncompressed because in thus video Anthony succeded in getting usable audio out of a clipped audio.
I'll need more tests though.
Mine came in yesterday so keep it coming!
Being able to edit the recorded file is amazing. I'll be selling my Go1 to pick up these puppies soon! great vid btw!
Didn't work for me I must screaming too much into the mic haha..
I would like to test electromagnetic radiation of this mic. Version ONE was kinda harsh on your body especially if you got it clipped to your neck.
When the Rode GO 2 do not pairing: 1. Switch on the receiver. 2. Switch on the two microphones. 3, Press and hold the number two button "on the receiver" for three seconds until the Wifi icon starts flashing. 4. Then click button number two once and wait for the connection. 5. For the second microphone, repeat steps 3 and 4.
I got distracted by the Rode on your seat belt, but then your sunglasses dominated my attention after that.
I need this. I held off on the first one because I wanted dual. Almost got the blink but I like Rode and I wanted the handheld mic option.
Always enjoy your videos. Being like I'm as old as your grandmom's mom, help me out here. I have the Rode Wireless Go now and make and edit all my videos on my iPhone 12 pro max. Lame I know. When you use both microphones will they both be captured in the movie clip to send to I Movie? Is the sound quality better in the Wireless Go 2 than in the first edition Rode Wireless?
Thanks Chari,
Yes both audios will be in the video on your iPhone. Sound is about the same but a lot of other improvements
@@TheEverythingMan I appreciate your answer. Not in the last 5 years have a received an answer so fast, with actual correct information. Make that 10 years.
Mine comes next week quick question how do you monitor/set the correct gain in the field
Mine just arrived today, charging now! Can't wait to try it out!
I loose audio sometimes.
Yo bro which one sounds better the one or the two?
Super good info! Makes this mic setup worth the cost alone for pros.
On my list for later this year. Thanks
What did you do exactly to your clipped audio? Cause my tests with clipped audio were not recoverable. And B&H website has a disclaimer that it doesn't record in 32 bit.
Ah never mind, you answered the question at the end of the video...you clipped audio on output of audio from your receiver into your cam so the files on transmitter weren't clipped. On my experiments I clipped audio at the transmitter and since these damn things have no input gain adjustment there is nothing we can do to prevent it with a loud laugh or yell.
My guess - Chris Hemsworth used his Thor power to fly over there, do the Rode shakedown, and get back to Australia before dinner time.
Hey thanks for the video. I sometimes do sidegigs as a wedding videographer and audio is my weakest point/ least experienced area so I'm going to ask a few questions here lol
When using just one transmitter, can you still have a safety channel?
When you do merged stereo mode and have a safety channel, are the audio from the transmitter still accessible as a separate recording without mixed audio from the other transmitter?
I'm looking for solutions because its merged stereo for safety channel, where for weddings I'd mic up the groom and the officiant, or maid of honor/bestman and rather have it separate and still have a backup for each. Any advice on this?
Also any tips on camera audio settings + rode wireless go 2 to avoid what happened to your video and avoid clipping?
Yes to both questions you can still have a safety ch and you will still have the backup.
As far as audio each camera is different. What I find best is get good levels on the RØDE first then plug it in and start from 1 on the camera and work your way up. Try to stay around -12db final output.
Best bet is do a series of test and write down the best results
Thanks so much!
Thank you señor. Now I have to buy more gear. Who’s gonna tell my wife?
Anthony, what kind of camera are you shooting now? The picture looks great!
Thanks! This is the A7s III
@@TheEverythingMan Thanks!!
haha, I just asked on the other video about fixing the sound. This is my answer. lol
I hope I never end up in the back of a Rode van. Love those glasses.
Rode Wireless Go II DOES NOT record in 32 bit float! You can export it in 32 bit, but it has nothing to do with 32 bit float recording.
Wait, wait....if you "merge" them, and have both on a safety channel...does that mean both the merged and safety channel do NOT have separate audio track for each transmitter? Can you in fact have a safety track for each individual transmitter or no?
I don't think so. I feel like the safety channel is only possible when recording with one transmitter.
@@Trankilstef nope lol. If they were smart they would have just recorded the safety track to the individual transmitter alongside the original recording and then you could still have your separated channels going to the receiver.
Thanks for the update. I had no idea it can do 32bit float! never clip again!
Can you use iMovie to edit video and audio with the Rode or do you suggest something else for a novice for video / audio editing
My Gta character has those same glasses!
🤣
Gotta watch out for the RØDE Mafia bro! But in all seriousness I had some issues with my new Wireless Go II when recording to my Zoom H6 and the gangsters from RØDE swooped in and helped me solve the problems. They are the best! I thought the original wireless go was perfect and they definitely hit a home run with the new ones, especially with the 32bit float!
No 32 bit float recording...export only.
Great info.
Great video. Nicely composed. One question! What happens when the transmitter's internal memory gets full by recording (Com/Uncomp) files in the middle of recording? Do they automatically loop and record by deleting the oldest file i.e. similar to the car dashcam memory management system?
Yep, they overwrite the earliest recording
@@SwansongMedia Thanks. Considering deep reviews of big names. It is a shame that all these intense/detailed reviews from big named YT channels, no one is mentioning this fairly important information
That information is superb for 32 bit float worth to buy it
Dope channel bro. New sub here 🙌🏾
Those sunglasses are straight 🔥 bro
Good one Bruh... had me roll'n with that Peaky Blinders!
I'm laughing from Australia, was pretty spot on 😂😂😂😂😂 the deep voiced ones are called Kiwi's 😂😂😂😂
Jokes
Ha ha mate, you're Rode's best accesory ❤️
for what suold I record voice to inner store while I've already record it in video file (on phone for example)?
You're funny. I subbed 😂
My man
24 bit internal recording 32 bit exporting*
How it compare with the Zoom f2 32 bit
Not sure I haven’t tested the zoom
@@TheEverythingMan I wonder if it is the same lossless 32 bit
@@TheEverythingMan could you share a sample of the recorded sound, or a photo of what the sound looks like in high tones, is it clipped
Look at Noah's comment above. This basically records in 24 bit, but lets you export at 32 bit. You don't get the 32 bit recording benefit with this. This is like recording a video in 1080P and exporting at 4K. It is not the same.
The Peaky Blinders were Brummies
A.L. - great update to last video, it helps explain a lot.
I noticed that but stuff happens....really cool that the rode Go II could fix those errors like that. Gangster! I also always have a hard time doing Australian accent 🤣🤣🤣 good one bro
Very nice comeback :-)
Great stuff! Thanks! New Subscriber here!
Anthony We All Know Vans Dont have Trunks🤣
You’ve never seen these vans before. They’re new
update video are better than the reviews!
LMAO Australian Gangsters
lmao bro I could listen to you talk all day. Should get into audiobooks.
So....did I win your contest?? :)
Did you delete my comment?
No sir I did not what did you say?
@@TheEverythingMan Thanks for replying. It was a link to a twitter thread between B&H, Rode, and myself. Basically, Rode originally lied about 32 bit support - both in their TH-cam video about the new Wireless Go II (comment section) - later deleted, and their marketing. It's not a true 32 bit float device. It's a 24 bit capture that they upscale - you loose the benefits of 32 bit float (actually, they were never there). Since then, B&H has put a disclaimer on the product about that very thing. I'll post the link in a separate reply. I bought it specifically for the 32 bit float that was advertising (on the day it was released), but ended up returning it unopened. I'll stick with version 1 and then continue to use the Zoom F2 which is true 32 bit float.
That Aussie accent was terrible lol
🤣
You are my hero 😂
You’re mine too bro!
😂😂😂 Australian gangstas lol 😂
Your barber needs to be taken out. Audio sounds great.
Bed head bro cut me a break
LOL love you brother!
Stop making me want to spend money.
🤣🤣
you got jokes dude
This makes me want these even more.... i know when i rented the R5, when filming in Raw I messed up the audio but i was able to salvage it, i was in pure shock but now i know it was because it was uncompressed audio which was dope.... anyways these rode go 2's are my next go to.