this one should have audio.... Looking to make some money? 8d9a7kr8cazd1o2ekbnwsrbydi.ho... Good dogs with great training. 5bfa9hrcoexcfxa9svt8c7205m.ho... Need a small shop? 0ba1clxbn9wb6z2xuzlf16u4vx.ho...
Just purchased and installed this set. The drain hose shakes so much when draining the water, it seems like it's going to pop off. Don't want a flood so will tighten the connection, but 🤦♂️!
How do you soak longer than it allows. I like to soak overnight. I stop the machine to soak, when starting it up it filled up with water. Don't want to change water level. Thanks Lind
Same thing happened to me but I fixed it! I’m not an expert but this worked for me! I left the washer open with a towel stuck in the fabric softener compartment to soak up the water. Then I stuck my finger in there to scrape away some of the waxy built up. For about 10-15 washes in a row (as I did my regular loads that month or so) I would microwave some vinegar until it was close to boiling but not boiling and pour in the fabric softener part and press the fabric softener button. The vinegar actually softened my clothes and my clothes never smelled like vinegar. It actually had a fresher scent like the detergent seemed better. It eventually did empty and clean out the compartment. I used fabric softener since but then after researching about how it ruins washers over time I don’t use any. Occasionally I use vinegar though just because I like how my clothes felt.
Just bought this machine according to Home depot one of those special order's that was October came in December 3 days before Christmas. Hate the noise it makes, spin cycle at one point I though it was broken. Not really happy with purchase.
The timer on this machine is the worst. It seems to start off showing the time PER cycle, so it’s so many minutes for the wash then resets so how many minutes for the rinse cycle. Each load takes forever. No sense in that.
Thanks, but I’m having problem with rinse and spin it keep repeating for example it start with 28 mins (full of water), it goes to 16mins the water drain then all of sudden it’s back 22mins !and fulling back with water and repeats.
Mine is doing the same thing, and now the tub is off balance. I’m so irritated about this washer, I can’t get the fabric softener to dispense and when I clean it out I use hot water and vinegar. That’s helps but then the softener just keeps sitting in the dispenser. What A piece of Junk!
THE WAY IT SPINS AT 2:35, THROWS ALL THE CLOTHES TO ONE SIDE AND MAKES IT OFF BALANCE. Mine sytays off balnce and wont spin until i rearrange everything and do a drain and spin. worthless machine
I have this machines is a good machine but dont put too many heavy conforters more than one at a time because its will go on an error cycle and its wont stop trying to rinse and spin not till you manually stop it and remove on item its will run right
I just installed mine today. Connected everything right. Wanted to start to using it and it's not filling with water at all. The washer start right into wash mode without actually putting any water in it. Reviewed water pressure, it's fine. Not sure what to do now.
It does that. It rotates back and forth for a minute before it starts putting in water. Fooled me to. I started looking at trouble shooting. Tried it again when I figured out it was normal. Just wait a couple minutes. The water will come.
It has an auto sensor for water level, it's hit and miss. I hate the fact you can not control the water level. Many times there is not enough water, so I just start it over and I see the water level, after that it fills to max level
@@estherjoseph1415 no fix as it is doing what it is supposed to do. I guess all these newer washing machines that use sensors have much longer Cycles then the old machines. I basically do all my watches using the quick wash selection. It seems to do fine for me and it doesn't take so long. Haven't had a problem with it yet. It just takes getting used to it not being like the old traditional machines
This machine is horrible. Clothes do not get get clean. His is agitating more than mine, and mine keeps showing an er3. Plus im old school. I just put the detergent right on the clothes🤷🏾♀️. No matter how much detergent i use. There's never any suds🥴
This is probably just some Chinese junk. The washer looks very Chinese and just looks cheap. It reminds me of a Midea or a Haier. And no, this is definitely not made by Frigidaire. GE got purchased by Haier but I don’t think their machines are actually built by Haier. Don’t buy appliances from companies you’ve never heard of before. Especially if you come across a no name washing machine or something. This washer also has a very generic design.
@@ScantPear could be a decent washer if the agitation was better on larger loads and the sound was faster and quicker. It has the makes of a decent machine but sadly it dosnt work well.
![[ไฮไลต์] ฟุตบอลชาย อาร์เจนติน่า vs โมร็อกโก รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/wE6uYH0yyzM/mqdefault.jpg)
Just purchased and installed this set. The drain hose shakes so much when draining the water, it seems like it's going to pop off. Don't want a flood so will tighten the connection, but 🤦♂️!
How do you soak longer than it allows. I like to soak overnight. I stop the machine to soak, when starting it up it filled up with water. Don't want to change water level. Thanks Lind
How do you soak in it longer than it does. I would like to soak overnight. Thank you Linda
been having this washer for 3yrs washes fine and spin just fine one problem is it leaks sometime under machine Make sure you get warranty i did.
Did you ever find out why it was leaking?
Did you ever found out the problem
Have you had a.y problem s with it locking
I just washer and dryer from Ilike it very much I still learning to use it My clothes come out cleaner then my old one
My new washer doesn’t stop fill. What is wrong?
Have had this washer a week and I’m having to get ahold of warranty . Refuses to spin or agitate with clothes in it.
It honestly looks like a good machine, only thing I wasn’t to fond of with it was that its spin speed can only hit 680rpm
My fabric softener dispenser won’t drain. I cleaned it out and used hot water to dissolve any clogs and nothing.
Wow. Sorry for that
Same thing happened to me but I fixed it! I’m not an expert but this worked for me! I left the washer open with a towel stuck in the fabric softener compartment to soak up the water. Then I stuck my finger in there to scrape away some of the waxy built up. For about 10-15 washes in a row (as I did my regular loads that month or so) I would microwave some vinegar until it was close to boiling but not boiling and pour in the fabric softener part and press the fabric softener button. The vinegar actually softened my clothes and my clothes never smelled like vinegar. It actually had a fresher scent like the detergent seemed better. It eventually did empty and clean out the compartment. I used fabric softener since but then after researching about how it ruins washers over time I don’t use any. Occasionally I use vinegar though just because I like how my clothes felt.
I had to clean out the dispenser that way too. Quit using liquid fabric softener completely.
I thought mines was broken, just waiting to see how clean my clothes comes out. Not satisfied with it
Need help mine does not spin even If I try to spin it by hand?
Just bought this machine according to Home depot one of those special order's that was October came in December 3 days before Christmas. Hate the noise it makes, spin cycle at one point I though it was broken. Not really happy with purchase.
The timer on this machine is the worst. It seems to start off showing the time PER cycle, so it’s so many minutes for the wash then resets so how many minutes for the rinse cycle. Each load takes forever. No sense in that.
How does exara rinse work. Lots of time
Como debo de configur mi lavadora es de este modelo avecez esta labando y se para y ya no me lava por mas a le aprite el boton del encendido
Thanks, but I’m having problem with rinse and spin it keep repeating for example it start with 28 mins (full of water), it goes to 16mins the water drain then all of sudden it’s back 22mins !and fulling back with water and repeats.
I guess it detects that cannot spin, so it keeps pouring water
Did you find a solution for this? Mine just started doing the rinse cycle over and over
Mine is doing the same thing, and now the tub is off balance. I’m so irritated about this washer, I can’t get the fabric softener to dispense and when I clean it out I use hot water and vinegar. That’s helps but then the softener just keeps sitting in the dispenser.
What A piece of Junk!
Mines doing this now, only 2 mos old😩
THE WAY IT SPINS AT 2:35, THROWS ALL THE CLOTHES TO ONE SIDE AND MAKES IT OFF BALANCE. Mine sytays off balnce and wont spin until i rearrange everything and do a drain and spin. worthless machine
I have this machines is a good machine but dont put too many heavy conforters more than one at a time because its will go on an error cycle and its wont stop trying to rinse and spin not till you manually stop it and remove on item its will run right
How do you put the detergent in it ?
from top
Necesito ayuda mi lavadora de este modelo cuando quiere lava o esta lavando derrepente ya para y no lava q puedo aser😊
La Carta elettronica es mala
Why does this machine start out agitating dry clothes before it starts washing?
I think is measuring weight
To even out the load
Its sensing the load size. By the amount of strain on the agitator.
If the agitator is to hard to move it knows it needs to add more water.
It spins first to weigh clothes to add appropriate amount of water...
Am I the only one that thinks these look a lot like the old Whirlpool cabrio AGIs??? It even beeps like they did.
Definitely not
Mine don’t want to do nothing error E3 and Fd
this washer sucks, no way to select load size, washed a single polo shirt and it used a full tank of water, is there a way to change this ?
I'm not really sure but I'll check
@@crifix. please do. If you find a way let me know
Mine machine does not spin when in wash cycle
Had to look up this video because all it was doing was that robot thing I thought it was broken.20 min into washing
zaD do you know if I can fit an agitator to an impellor
@@grantfarquhar9506 I have no clue sorry boss.
Im here for the same reason 😂
Add me to the list to make sure this is normal
@zaD...SAME!!! I was like...WTF, this thing is broke!! 😂😂😂
I just installed mine today. Connected everything right. Wanted to start to using it and it's not filling with water at all. The washer start right into wash mode without actually putting any water in it. Reviewed water pressure, it's fine. Not sure what to do now.
It does that. It rotates back and forth for a minute before it starts putting in water. Fooled me to. I started looking at trouble shooting. Tried it again when I figured out it was normal. Just wait a couple minutes. The water will come.
Yes I agree...wait some time....dunno why but there are times that it takes longer
My does the same,just wait.
I appreciate this comment I came here thinking mine was defective
Yayyyy!! Same problem! I've already called and told them they sold me a messed up washer. I'm ready to go home and wash clothes now
Hów do you change time on it
This washing machine is by far the worst.
We had problems with it 2 months after buying.
Our old machine was a lot better.
Just bought this machine.. I'd say it takes twice as much time as my old (6 y/o) machine..to get one wash done..
too much time spinning..
The cycles take way to long, even delicate and hand wash. Just another reason I hate this machine.
Mine keep getting stuck in e1 error code I tested the water supply it’s getting enough water
There should be a card inside that tells you how to troubleshoot
How do you get the right water load.
What do you mean?
Mine had way more water than that..how does it know small, medium, large for water level?
I know i was thinking the same thing . it doesnt have a button for that function and it doesn't seem to fill with alot of water.
It has an auto sensor for water level, it's hit and miss. I hate the fact you can not control the water level. Many times there is not enough water, so I just start it over and I see the water level, after that it fills to max level
My washer fills so much that it doesn’t stop. I need to cancel so it doesn’t fill up to the lid. I don’t know what to do
This washer look like my Insighia
I guess I bought a lemon.
Mine does not make foam at all I don’t see any soap really wat am I doing wrong
Not mixing soap and water?
Maybe use a different detergent
Hate, hate, hate this machine. Wonky timers, stupid cycles. Keeps leaking soapy water from under the washer.
Seems to work. Cycles are just too long. Spin seems to start and stop repeatedly for ever.
Think I'll try quick wash next time
Did you get it fix and if so what did you do ?
@@estherjoseph1415 no fix as it is doing what it is supposed to do. I guess all these newer washing machines that use sensors have much longer Cycles then the old machines.
I basically do all my watches using the quick wash selection. It seems to do fine for me and it doesn't take so long.
Haven't had a problem with it yet. It just takes getting used to it not being like the old traditional machines
Sounds like nacho libre
Que alguien me ayude en español 🥺🥺 como se usa esta maquina.
Si sabes algo ayúdame también no puedo lavar
Que pasa
Yo no le entiendo
La mia no llega al final ciclo
@mariasantana-ph7ku no descarga agua?
If you still have it, could you wash a single pair of Jean in there? Just one large sized Jean. I would like to see if it could handle it
And make a video and post it. When you put one Jean in there, when it gets to the spin, record it and see if it shakes
800 hoir jist let water in
Why are these manufacturers getting so lazy with one piece spiral agitators. If this thing was a true dual action it might perform better.
Is there a filter on this machine that will need to be cleaned occasionally?
There should be filter on water intake
@crifix where and how do I change / clean it?
WORST WASHER EVER!!!!!!!
Help!!! My washer fills so much
Check water inlet
This machine is horrible. Clothes do not get get clean. His is agitating more than mine, and mine keeps showing an er3. Plus im old school. I just put the detergent right on the clothes🤷🏾♀️. No matter how much detergent i use. There's never any suds🥴
Try to use deep fill
I’m sick of this twist action for hours the start process is taking way to long what the heck !
Also I fallowed you but I still can't get water
Where can I get the drain pump
Did u try to Google the name and serial number of the washer?
Finally audioooo
Porque se tarde mucho en lavar
how you put the audio in butoms??
Como programar
Lo puedes trasmitir en español por favor es muy importante para mi
No se
encontraste? me avisas yo igual
E3 error PLEASEEEE HELP!
Washer Tech Sheet FFTW4120&1SW update20180827.cdr
Is a lid problem
Close the lid, it's a safety feature. The lid must be closed before starting the washing machine
E1????
Tiene un ruido el area de la polea
Donde?
Porque se tarda mucho lavando
@@nannettemorales7672 Esta lavadora es así, pero la ropa queda limpia.
mine just flooded our whole house oops
Noooooo...how?
What happened to make it flooded the house cuz my is doing the same thing in spin mode
@nawshit4068: OH MY GOD!!!!!! Your house probably looks like the Las Vegas Floods!!!!!!
Spanish pleasse
Progeamar
This is probably just some Chinese junk. The washer looks very Chinese and just looks cheap. It reminds me of a Midea or a Haier. And no, this is definitely not made by Frigidaire. GE got purchased by Haier but I don’t think their machines are actually built by Haier. Don’t buy appliances from companies you’ve never heard of before. Especially if you come across a no name washing machine or something. This washer also has a very generic design.
Tengo una que coge agua y la vota no lava
La valvula de descarga
Thank you love I would've never figured out this stupid dumbas washing machine
Too much noisyyyyyyyy
No speak inglish
All the new machines are junk .
Agree
Agree
What was the point of this video
I Guess for you to see before you buy!
This washer is junk
I agree
Brenda Mcmillian I want a first generation cabrio over this
@@ScantPear could be a decent washer if the agitation was better on larger loads and the sound was faster and quicker. It has the makes of a decent machine but sadly it dosnt work well.
I hope not i just bought this washer
@@patricemurray7931 it is
How can I adjust the water level?
The computer does it