The easy way of getting a higher zoom level around airports (instead of going into that preview thing and manually doing it) is to go into settings, and under "DSF/Imagery", set "high_zl_airports" to "True".
Dr. Stephen Hawking, the Astro-Physicist once tried to install OrthoVer1.30 and finally had to give up. Too complicated. Went back to his Physics, Black holes etc, much easier.
Im permanently stuck using default scenery because I cant figure it out, either. And there's no one to pay to do it for you. I hate this product. I would like to punch the guy in the nose who invented it.
@@redwatch1100 Me too! Tried many times, different servers with different ZL, followed the video with every step and still no success... Let me know if you´ll figure it out.
Well I hope that isn't you flying that baron in your profile photo. If you cant follow these simple instructions to install this stuff, well, get out of that baron and get as far away from my airspace as possible!
I`m a bit late on the subject here but this video allowed me to create Tiles first time round, perfect. Simple concise and to the point video. Thank you so much !!
this is SOOOOO MUCH BETTER than all the others! This tutorial is done perfectly! Man... one of the others were all over the place and extremely confusing. This is FANTASTIC!
I did this and I wasn’t sure if it was worth it.. got to about 12000 ft and it opened a new door for me it’s amazing.. thank you for making it understandable..
I certainly couldn't have done it without you. Thanks so much! Sometimes I had to pause or go back, but all the steps are there and it's really clear. Great video tutorial.
Thank you for your superb guide, in layman's --or should I say in lay-Xplane-user's-- terms! After watching it, I started creating my ortho tiles and that was the only time I did not give up doing it. Greetings from Greece!
This is a great tutorial! One thing that caught me out - make sure you have the default flight scenary in Xplane installed for the Australia/New Zealand region otherwise the overlay step will fail in OrthoXP.
Great tutorial. The only one that I have properly been able to understood up to until now. It's taken me hours. Time to jump back in my Lockheed SR-71 Blackbird and zoom pass my grandkid's houses at mach 3.3. I'll record the video and show them tomorrow they'll be like meh whatever grandad lol. Thanks dude :)
Thanks. Worked first time by simply following your guide. Glad I learned my way around a PC - modding and configurating and whatnot for lo these many years but I still would have found this intimidating without your help.
I edit the scenery file before starting X-Plane so the lines are in the correct place before I start the game. This saves a lot of time and I never have problems.
Hey Wayne, instead of copying the tiles into the XPlane folder environment, you can copy shortcuts to the tiles. This has three benefits: 1) leaves the original tiles in place so you can see what tiles you have produced; 2) reduces the space taken in your Xdrive environment,; 3) allows you to copy the shortcuts to multiple instances of XPlane for beta testing etc.
Matthew Stratford Hi Matthew, it doesn’t automate the process, it mainly allows me to leave the tiles on a drive/folder of my choosing and distribute links to the tiles (which are tiny in size) to the appropriate folder in Xplane. This is manually intensive but easy enough to do. I first select the generated tiles by date and create shortcuts. I then move or copy the shortcuts to the folder in Xplane. If I have multiple instances of Xplane, I simply repeat the copy to the other installations. Very little space is consumed.
Thanks Paul, yep, this video is just the very basics of how to create a tile. I'll be doing another more advanced video showing the other features of the software soon.
@@mjstratford Hi Matthew, I was going to comment as did Paul. Just copy the same directories (i.e., the ortho and mesh [lat/long] folders) as shown in the video. On windows use the right mouse button and then select "Create shortcuts here" from the menu when dropping them in the scenery folder. On a Mac just create an alias folder. Good Luck
Very appreciated. I wasted my time on a few other tutorials that failed me getting it working, but your video was excellent and so happy to be now using Ortho!
Amazing tutorial!!!! thank you very much for this! My SSD does not agree, however...hehehe. Seriously, thank you for taking the time for doing this. I thought that the whole ortho thing was sitting right next to rocket science, but you managed to explain it in a way that us mere mortals can use it and enjoy it. A beer for you, man!
Thanks for the tutorial! It was really helpful. I was watching your old tutorial, which wouldn't work, even after the tenth time. But this one was very easy.
+1 Luna's World - Great update tutorial! Yes, Ortho4XP is an excellent tool, but this video shows a glaring weakness, either in Ortho4XP, or X-Plane itself, that I hope will be addressed at some point. Wouldn't it be great if there was an option to select a smaller tile size than the massive 1° x 1° lat-lon chunk? And the problem is magnified when having to grab 2 or more huge ~7GB tiles, as in this video. An example is my hometown back in the US, which unfortunately is nearly at the lower left corner of a tile. It means I would have to process and store 4 huge tiles just to get the whole city and surrounding area. I realize we can use lower resolution ZL zones for unimportant areas to save file space but 4 tiles would still be massive, and overkill. With my luck, most places I want to add seem to be near a tile corner. Go figure. Another wish list item is to be able to zoom IN and OUT in the Tiles Collection map to easily confirm our tile selection. Of course, since Ortho4XP is free it's only fair to make suggestions and not gripe too much. Cheers from Thailand!
thank you for this video. this really works and I am converting from my laptop and it has only 250gb so I have to set zoom level to 16 lowest as possible. this works exactly. you don't need phyton or anything.
I'm going to download v1.3 and redo some of my Thailand tiles since some of my airports have ridiculous gradient changes in places. I believe v1.3 is supposed to do a better flattening job. That settings page looks scary though. Like you said, probably best left alone :).
Fantastic! I definitely need to do more Thailand tiles! Yeah, this version does a lot of the complex stuff right out of the box allowing everyone (no matter of expertise level) to get good results. Win-win!
Great tutotial, I didn't know this all is in fact possible! I stranded for some seconds at the 'make sure you have the red mash' at 8:53, since you didn't tell how to do that. But it's SHIFT + mouseclick. My file is being made now, I'm very curious how it comes out!
Hi, thanks for the great video. At 10:45 you mention to copy the overlay files. I’m not getting this folder, but it seems it does not matter, as I get the tiles and their contents in XPlane 11 properly displayed. I checked all relevant boxes before creation and also set the pointer to the Global Scenery in the application configuration.
Thank you. I've tried several and this tutorial finally got it done. You do one thing different. Putting the Overlays above the Global Airports. No one else I watched did that. I do have one bug. My local Daytona Airport I added on steam does not show the photo scenery. I have to fly outside of that add on area and then I see it. Thanks again for your time. G
Damn mine only took 22m38s to download.. Guess I have a fast PC? Thanks for the tutorial, it really helped! I did the exact scenery you did just to make sure I didnt mess it up.
@@Hi-mt3lp There is no overlay folder within the Ortho4XP folder and sub-folders that the installation built. I now have a successfully completed batch process with no overlay folder. I have looked everywhere . No there.
So I did all your steps but the ortho doesn’t show up when I play Xplane. What could be the issue ? I put the Y and Z file in the locations you stated . It’s my first time using ortho4 Xplane
I found one instruction missing as i could not get batch build to work .. another video showed the need to hold down the "shift" key and then mouse click the active tile to get the proper selection of the tile . After that the batch build option works
Finally I am able to use overlays correctly. Thank you so much. I’ve successfully loaded 1 area with overlays. I have one question though... when you cut and paste the overlays file in ortho4xp into the xplane custom scenery file what is the procedure to add another area? Doesn’t ortho4xp need the overlays folder in its original location or how do I make sure I can keep repeating this video process. I feel like if I’ve cut and pasted the overlays folder into the custom scenery folder how do I make sure the proper files are put into the ortho4xp overlays folder if I’ve moved it into custom scenery?
Step 4 : Extracting overlay for tile +46-069 : -------- ERROR: file Earth nav data\+40-070\+46-069.dsf absent. Recall that the overlay source directory needs to be set in the config window first.
I just found a way to do this by setting the "Base Folder" to your "...X-Plane 11/Custom Scenery" folder. It highlighted all the tiles I already had rendered.
I kept getting warnings and errors when I tried it using BIng imagery, the text said something like "WARNING: Could not convert texture...... " and then after a number of those warnings an error appeared that said "ERROR: [same text as the warnings] (10 tries)". This was repeated through the entire process.
Great video, thank you. Just a heads up on copying the files over to the X-plane directory. I like to keep all my tiles in the Ortho4XP folder and just copy a shortcut and place it in the X-plane folder. The same goes for the Overlays folder. Its quicker and easier to maintain imho.
Helpful... and it worked, thanks! ONE QUESTION: why do the Ortho overlays go ABOVE the Global Airports and above the landmarks and the demo areas... but BELOW some specific airports? 12:14
Thanks for this, works great, I was even able to put tiles in custom scenery folder on separate HDD to free up space on SSD. One question I have though is am I able to download tile info from another location (with faster and unlimited internet) and then copy and compile them to computer running X-plane? I noticed you have to put in the directories for global scenery first so I am not sure if it was possible to download and compile tiles without X-plane being on the computer.
I have tried this and i cannot get the overlays to show in the sim. I have made sure that the correct folders for custom_scenery_dir and custom_overlay_src have been selected as you have shown in the video. I assume once the tile has been created i just put it in the Custom Scenery folder and no other work is needed. In the Scenery.ini file i don't see any (y) prefix names.
check mod order in scenery_packs.ini ("X-Plane 11\Custom Scenery\"). It needs to be put after custom airports, preferably at the end of the load order.
I am trying to get orhto to Alps, but I get ALOT of white slots. In the main tab of installing ortho, it says that image could not be obtained even with lower ZL. What shall I do?
i can't download it when i press batch build this pop up View server may be down or busy, new tentative in 2 sec... View server may be down or busy, new tentative in 4 sec... View server may be down or busy, new tentative in 8 sec... View server may be down or busy, new tentative in 16 sec...
Again a very good even excellent tutorial for use of 1.30, just have to say that to get the 1.30 application available you MUST do some python programming yourself which is somehow quite abrupt for non expert, although a very nice and excellent tutorial indeed , thank you very much
![Ortho4XP 1.30 | How to COLOR CORRECT Miscolored Areas in Photoreal Scenery [Tutorial|X-Plane 11]](http://i.ytimg.com/vi/WzbcrfR6hD8/mqdefault.jpg)
The easy way of getting a higher zoom level around airports (instead of going into that preview thing and manually doing it) is to go into settings, and under "DSF/Imagery", set "high_zl_airports" to "True".
Thank you so much u have no idea
Dr. Stephen Hawking, the Astro-Physicist once tried to install OrthoVer1.30 and finally had to give up. Too complicated. Went back to his Physics, Black holes etc, much easier.
Im permanently stuck using default scenery because I cant figure it out, either. And there's no one to pay to do it for you. I hate this product. I would like to punch the guy in the nose who invented it.
@@redwatch1100 Me too! Tried many times, different servers with different ZL, followed the video with every step and still no success... Let me know if you´ll figure it out.
@@redwatch1100 try vstates. You can basically all of America for free with real high quality ortho. Also get Jamaica and Ireland.
It’s easy lol. I only found out that thing exists yesterday and I had a few issues at first but then figured it out and now it’s all works perfectly.
Well I hope that isn't you flying that baron in your profile photo. If you cant follow these simple instructions to install this stuff, well, get out of that baron and get as far away from my airspace as possible!
Everytime I touch Ortho4XP I immediately come back to this video lol. A link should come in the readme
Jon Allsop thanks. Glad it helps!
I`m a bit late on the subject here but this video allowed me to create Tiles first time round, perfect. Simple concise and to the point video. Thank you so much !!
Actually, I'm very glad that you didn't load both tiles. That was a GREAT side-by-side of the scenery.
The best, least complicated, most concise, less "listen to me talk" BS. LOVE this one. Def. the best out there. Thank you.
this is SOOOOO MUCH BETTER than all the others! This tutorial is done perfectly! Man... one of the others were all over the place and extremely confusing. This is FANTASTIC!
dajzilla thanks, much appreciated and glad it helps!
I did this and I wasn’t sure if it was worth it.. got to about 12000 ft and it opened a new door for me it’s amazing.. thank you for making it understandable..
I certainly couldn't have done it without you. Thanks so much! Sometimes I had to pause or go back, but all the steps are there and it's really clear. Great video tutorial.
14:06 - Note to self: don't exit flying aircraft to "have a look around." 🤣
Amazing vid, by the way. This clears up the whole process very succinctly.
14:06 plane crashes.. "let's just ignore that" 😂🤣
lol
I like that you did not dive to deeply into the program. Your explanation shows the fastest way to get a nice photorealistic scenery.
Thanks mate, finally an explanation that makes sense :) Real nice work.
Now I'm flying using Ortho4XP and I feel that I'm enjoying MS Flight Simulator 2020 now. no need to wait for releasing it. Thanks a lot.
Thank you for your superb guide, in layman's --or should I say in lay-Xplane-user's-- terms! After watching it, I started creating my ortho tiles and that was the only time I did not give up doing it. Greetings from Greece!
This is a great tutorial! One thing that caught me out - make sure you have the default flight scenary in Xplane installed for the Australia/New Zealand region otherwise the overlay step will fail in OrthoXP.
I also noticed the “global scenery” directory needs to be the “X-Plane Global Scenery” folder, which is inside of the “Global Scenery” main folder.
Great tutorial. The only one that I have properly been able to understood up to until now. It's taken me hours. Time to jump back in my Lockheed SR-71 Blackbird and zoom pass my grandkid's houses at mach 3.3. I'll record the video and show them tomorrow they'll be like meh whatever grandad lol. Thanks dude :)
Thanks. Worked first time by simply following your guide. Glad I learned my way around a PC - modding and configurating and whatnot for lo these many years but I still would have found this intimidating without your help.
Great video bruh. Easily explained and easily understood.
I edit the scenery file before starting X-Plane so the lines are in the correct place before I start the game. This saves a lot of time and I never have problems.
Hey Wayne, instead of copying the tiles into the XPlane folder environment, you can copy shortcuts to the tiles. This has three benefits: 1) leaves the original tiles in place so you can see what tiles you have produced; 2) reduces the space taken in your Xdrive environment,; 3) allows you to copy the shortcuts to multiple instances of XPlane for beta testing etc.
Hi Paul how do you do that ? I was doing the same as wayne but wanted to know how to automate it
Matthew Stratford Hi Matthew, it doesn’t automate the process, it mainly allows me to leave the tiles on a drive/folder of my choosing and distribute links to the tiles (which are tiny in size) to the appropriate folder in Xplane. This is manually intensive but easy enough to do. I first select the generated tiles by date and create shortcuts. I then move or copy the shortcuts to the folder in Xplane. If I have multiple instances of Xplane, I simply repeat the copy to the other installations. Very little space is consumed.
Paul could you explain how this is done please , appreciate it , also useful to see what tiles have been done,
Thanks Paul, yep, this video is just the very basics of how to create a tile. I'll be doing another more advanced video showing the other features of the software soon.
@@mjstratford Hi Matthew, I was going to comment as did Paul. Just copy the same directories (i.e., the ortho and mesh [lat/long] folders) as shown in the video. On windows use the right mouse button and then select "Create shortcuts here" from the menu when dropping them in the scenery folder. On a Mac just create an alias folder. Good Luck
leaving the plane crashing to show us the beatiful scenery haha love it.
Thank you for this updated tutorial. Very helpful and much appreciated.
Very appreciated. I wasted my time on a few other tutorials that failed me getting it working, but your video was excellent and so happy to be now using Ortho!
Thank you! I literally followed along in my left monitor and had you in my right. You made the install and config super clear and easy!
I like your explanation of how to use different sources. Thanks...
Wow! Great video. Finally making Ortho4XP has become not that complicated as it was months before. Thank you so mcuh!
Great tutorial man! Thanks for contributing to the X-Plane community!
Extremely detailed but simple to follow. Great tutorial
Amazing tutorial!!!! thank you very much for this! My SSD does not agree, however...hehehe. Seriously, thank you for taking the time for doing this. I thought that the whole ortho thing was sitting right next to rocket science, but you managed to explain it in a way that us mere mortals can use it and enjoy it. A beer for you, man!
Once again very good, clear and easy to understand and follow!👍 You have a very nice way of explaining things!
Excellent video Wayne, thanks buddy!
Hey mate, like others have said, this a very simple and helpful tutorial. Thankyou for taking the time to do it.
Thanks man!
I was really struggling with Ortho4XP but now I got it!!
Excellent video thank you, im just getting into O4XP and you explain very clearly! Im following along now with the program on the othe screen!
Great video. Lot better than other ones I have seen!
Thanks for the tutorial! It was really helpful. I was watching your old tutorial, which wouldn't work, even after the tenth time. But this one was very easy.
+1 Luna's World - Great update tutorial! Yes, Ortho4XP is an excellent tool, but this video shows a glaring weakness, either in Ortho4XP, or X-Plane itself, that I hope will be addressed at some point. Wouldn't it be great if there was an option to select a smaller tile size than the massive 1° x 1° lat-lon chunk? And the problem is magnified when having to grab 2 or more huge ~7GB tiles, as in this video.
An example is my hometown back in the US, which unfortunately is nearly at the lower left corner of a tile. It means I would have to process and store 4 huge tiles just to get the whole city and surrounding area. I realize we can use lower resolution ZL zones for unimportant areas to save file space but 4 tiles would still be massive, and overkill. With my luck, most places I want to add seem to be near a tile corner. Go figure.
Another wish list item is to be able to zoom IN and OUT in the Tiles Collection map to easily confirm our tile selection. Of course, since Ortho4XP is free it's only fair to make suggestions and not gripe too much.
Cheers from Thailand!
thank you for this video.
this really works and I am converting from my laptop and it has only 250gb
so I have to set zoom level to 16 lowest as possible. this works exactly.
you don't need phyton or anything.
Thankyou so much Luna. Awesome. :)
Great tutorial. Very well explained and easy to follow even for a doughnut like me. Well done fella
Awesome job explaining! Best Ortho tutorial I have seen
Thanks for the video! Is great and I have been able to know how to use Ortho4XP to create my own tiles, very useful mate, thank you.
Thanks for this great guide.
Good explanations, please continue with other subjects,. Thank you
You're a funny guy. Jumping out of your plane and when you hear it crashing saying "just ignore that". Nerves of steel!
22h48m9sec! Almost made it to 24 hours - so glad Ortho4XP didn’t crash.
TBolt did u download a whole country? 😯😂
Hi lol no ... about a dozen sectors of Southern California. I was surprised it took that long, but the results are worth the wait 👍🙂
Wonderful !! I'm looking for this tutor. Thanks you very much.
I'm going to download v1.3 and redo some of my Thailand tiles since some of my airports have ridiculous gradient changes in places. I believe v1.3 is supposed to do a better flattening job. That settings page looks scary though. Like you said, probably best left alone :).
Fantastic! I definitely need to do more Thailand tiles! Yeah, this version does a lot of the complex stuff right out of the box allowing everyone (no matter of expertise level) to get good results. Win-win!
Great tutotial, I didn't know this all is in fact possible! I stranded for some seconds at the 'make sure you have the red mash' at 8:53, since you didn't tell how to do that. But it's SHIFT + mouseclick. My file is being made now, I'm very curious how it comes out!
Hi, thanks for the great video. At 10:45 you mention to copy the overlay files. I’m not getting this folder, but it seems it does not matter, as I get the tiles and their contents in XPlane 11 properly displayed.
I checked all relevant boxes before creation and also set the pointer to the Global Scenery in the application configuration.
You're a lifesaver. Thank you so much!
Thank you. I've tried several and this tutorial finally got it done. You do one thing different. Putting the Overlays above the Global Airports. No one else I watched did that. I do have one bug. My local Daytona Airport I added on steam does not show the photo scenery. I have to fly outside of that add on area and then I see it. Thanks again for your time.
G
I just thought that I would say that you don't have to move the files, you can use shortcuts into the Custom Scenery folder.
I don't know why but, I have problems with overlays... I did everything just the same
Oh btw, thanks for the video. I did'nt know there was a new version of ortho 4xp.
10:30 YOU MADE ME SUFFOCATE!!! THAT BFILE IS SO BIG
directly to the point. Super easy to understand, Thank you for putting the time to make this video.
Damn mine only took 22m38s to download.. Guess I have a fast PC? Thanks for the tutorial, it really helped! I did the exact scenery you did just to make sure I didnt mess it up.
You just got a new subscriber! Thanks for the help :)
thanks for a great explination
Amazing video I just downloaded 11 tiles for the uk at zoom level 17
Really helpful video. Thanks very much!
I didn't get an overlay folder...?
PJ D the overlay folder should be in the same place where all the ortho software is
@@Hi-mt3lp There is no overlay folder within the Ortho4XP folder and sub-folders that the installation built. I now have a successfully completed batch process with no overlay folder. I have looked everywhere . No there.
Very helpful. Thank you.
Great video
Thank you! :)
So I did all your steps but the ortho doesn’t show up when I play Xplane. What could be the issue ? I put the Y and Z file in the locations you stated .
It’s my first time using ortho4 Xplane
I found one instruction missing as i could not get batch build to work .. another video showed the need to hold down the "shift" key and then mouse click the active tile to get the proper selection of the tile . After that the batch build option works
Hello and thank you for this useful tutorial !! ;)
Thank you very much. Very helpful.
Finally I am able to use overlays correctly. Thank you so much. I’ve successfully loaded 1 area with overlays. I have one question though... when you cut and paste the overlays file in ortho4xp into the xplane custom scenery file what is the procedure to add another area? Doesn’t ortho4xp need the overlays folder in its original location or how do I make sure I can keep repeating this video process. I feel like if I’ve cut and pasted the overlays folder into the custom scenery folder how do I make sure the proper files are put into the ortho4xp overlays folder if I’ve moved it into custom scenery?
I think that was a mistake. Ortho needs that folder.
Step 4 : Extracting overlay for tile +46-069 :
--------
ERROR: file Earth nav data\+40-070\+46-069.dsf absent. Recall that the overlay source directory needs to be set in the config window first.
Great vid finally got it to work but each time you add a new area do you need to place new overlay file above airports in config file each time
For each tile that I create, I had to update the overlay folder or do I have to create many overlay folders with different names?
this was helpful I had to re install o
my xplane and I had forgot how to do ortho tiles
Great tutorial, thanks mate!
Make sure to put "Use decal on Terrain" to True for a better terrain effect.
lol i was thinking aobut doing the whole world but i think ive changed my mind on that
I was kidding
i did exactly what the video says but i did not get an ortho4xp overlays file. does anyone know what to do???
Found a fix... forums.x-plane.org/index.php?/forums/topic/152400-ortho4xp-130-not-generating-overlay-folder/
What's the best way to keep track of which tiles you've already generated when expanding an area?
I just found a way to do this by setting the "Base Folder" to your "...X-Plane 11/Custom Scenery" folder. It highlighted all the tiles I already had rendered.
I kept getting warnings and errors when I tried it using BIng imagery, the text said something like "WARNING: Could not convert texture...... " and then after a number of those warnings an error appeared that said "ERROR: [same text as the warnings] (10 tries)". This was repeated through the entire process.
thanks for the video !!
Great video, thank you. Just a heads up on copying the files over to the X-plane directory. I like to keep all my tiles in the Ortho4XP folder and just copy a shortcut and place it in the X-plane folder. The same goes for the Overlays folder. Its quicker and easier to maintain imho.
i´m Looking for that to long time. thanks
Helpful... and it worked, thanks! ONE QUESTION: why do the Ortho overlays go ABOVE the Global Airports and above the landmarks and the demo areas... but BELOW some specific airports? 12:14
Thanks for this, works great, I was even able to put tiles in custom scenery folder on separate HDD to free up space on SSD. One question I have though is am I able to download tile info from another location (with faster and unlimited internet) and then copy and compile them to computer running X-plane? I noticed you have to put in the directories for global scenery first so I am not sure if it was possible to download and compile tiles without X-plane being on the computer.
You have to turn maximum objects to maximum to get the overlay
help...followed the steps and sadly getting error saying "could not convert texture"..followed everything to the letter?
I did not have the yOrtho4XP_Overlays folder to copy into the custom scenery folder. Any idea why that was not there? I followed every step. Thanks
I cannot open the programme... Can somebody help ? When I open it, it just crashes and disappears.
Still incredibly helpful!
THANK YOU SO MUCH
I was literally struggling to death to get these overlays hahah:))
I have tried this and i cannot get the overlays to show in the sim. I have made sure that the correct folders for custom_scenery_dir and custom_overlay_src have been selected as you have shown in the video. I assume once the tile has been created i just put it in the Custom Scenery folder and no other work is needed. In the Scenery.ini file i don't see any (y) prefix names.
Everything goes very smooth but at the end when I load in the sim it says cannot read a few files but I follow all the steps
How come I followed the steps 100% and my airport buildings in XP disappeared? How do I fix this?
check mod order in scenery_packs.ini ("X-Plane 11\Custom Scenery\"). It needs to be put after custom airports, preferably at the end of the load order.
what do I do if the overlay thing wansnt in my ortho
@@r3gflm916 im getting the same thing. Its not generating the overlay file. I dont understand your reply sorry.
I am trying to get orhto to Alps, but I get ALOT of white slots. In the main tab of installing ortho, it says that image could not be obtained even with lower ZL. What shall I do?
Everyone on the forum says DO NOT put the overlays in Global Scenery and leave this folder alone....
I'm not getting the red mesh in the square what do i need to do i have followed all the instructions ?
i can't download it when i press batch build this pop up View server may be down or busy, new tentative in 2 sec...
View server may be down or busy, new tentative in 4 sec...
View server may be down or busy, new tentative in 8 sec...
View server may be down or busy, new tentative in 16 sec...
Again a very good even excellent tutorial for use of 1.30, just have to say that to get the 1.30 application available you MUST do some python programming yourself which is somehow quite abrupt for non expert, although a very nice and excellent tutorial indeed , thank you very much