Hi, thank you for the video, it is very helpful! Along the process, I have discovered that taking the glovebox is not necessary. There's a shortcut around the glovebox. You can attach the cam cable to a flexible wire and push them inside the dash hole towards the doorside opening and catch the wire from there.
He instalado la cámara de marcha atrás, pero en la pantalla se ven los objetos al reves, al lado contrario, cómo si fuera en un espejo. Se puede cambiar o configurar eso ?
Hi, You are great! Could You tell me the number of cantype that you set in the menu? My head unit doesn't Work With rear cam neither can bus of the car. Thanks a lot
I have a 2007 XC 90 and just did a back up camera install. The last step was waiting for the fuse tap from Amazon. I tried the fuse tap solution just like you showed in your video. If i installed both fuses into the tap, the reverse camera was on all the time. If I installed the outer fuse and not the inner fuse, I had no back up lights and no camera. The back up lights worked with both fuses in place, or with just the inner fuse. I tried all of the combinations (flipped the tap upside down) and couldn't get it to work. Was there a specific tap that you used? Any advice would be appreciated.
Didn't work in either 1 or 26 on my 2012 XC90, not sure if things changed but both are permenantly live so the feed is permanently on. I guess I will need top into the wires that go to the light bulb and add a relay to switch it on and off.
I was thinking of buying the Teyes System for my XC90, I'm not good with wiring I dont mind paying you to install as you know what your doing. Let me know mate. All the best......
Hi, thank you for the video, it is very helpful! Along the process, I have discovered that taking the glovebox is not necessary. There's a shortcut around the glovebox. You can attach the cam cable to a flexible wire and push them inside the dash hole towards the doorside opening and catch the wire from there.
Lot of appreciation for this video, it’s a life saving😅
Great videos on this. Appreciate the time to show each step. Thanks.
Good job, thanks for this wonderfully made video.
He instalado la cámara de marcha atrás, pero en la pantalla se ven los objetos al reves, al lado contrario, cómo si fuera en un espejo. Se puede cambiar o configurar eso ?
Hi just to confirm you have now piggy backed off the parking assistant fuse in the boot (5a) and it hasn't caused your battery to drain?
Yes
Where do you buy the number plate light clip thing
Off eBay, check the link in the description
Hello, i have a GPS and maybe a speaker, do you think there is enough space to install it ? Tks
Yes
Does the park assist for the factory radio still works after adding this radio?
On my one it does
@@c2fixit thanks
Hi, You are great! Could You tell me the number of cantype that you set in the menu? My head unit doesn't Work With rear cam neither can bus of the car. Thanks a lot
I have xc90 too
Hi mate
For the camera, try the NTSC setting.
For the canbus, try this setting
CanBox: OuDi
Cars: Volvo
Models: XC90
Config: Public
Does this one wok in a 2004 XC70 as well? I have the AUX and even the amplifier under the seat.
I would message the seller on eBay and ask him
I don’t have an xc70, so I wouldn’t know
I have a 2007 XC 90 and just did a back up camera install. The last step was waiting for the fuse tap from Amazon. I tried the fuse tap solution just like you showed in your video. If i installed both fuses into the tap, the reverse camera was on all the time. If I installed the outer fuse and not the inner fuse, I had no back up lights and no camera. The back up lights worked with both fuses in place, or with just the inner fuse. I tried all of the combinations (flipped the tap upside down) and couldn't get it to work. Was there a specific tap that you used? Any advice would be appreciated.
I used the one for the rear parking sensors
OK... thanks will try that. BTW, that is fuse 26 in the lower right hand side of the fuses in the block
@generalinformation5284 yep, that sound right
Think it’s a 5 amp, but can’t remember for sure
Let me know how it turns out
Didn't work in either 1 or 26 on my 2012 XC90, not sure if things changed but both are permenantly live so the feed is permanently on. I guess I will need top into the wires that go to the light bulb and add a relay to switch it on and off.
What did you do to get rid of the horizontal scrolling lines?
It’s to do with the camera settings in settings
I was thinking of buying the Teyes System for my XC90, I'm not good with wiring I dont mind paying you to install as you know what your doing. Let me know mate. All the best......
Where are you located?
@@c2fixit 20 miles up the M11
@shahalam6189 email me at c2fixit.yt@gmail.com
@@c2fixit Yes, thank you I have emailed you.
@shahalam6189 still haven’t received anything.
Could you try again?
c2fixit.yt@gmail.com