Install LED Lights On Your RC Vehicle - How-To
ฝัง
- เผยแพร่เมื่อ 9 มิ.ย. 2024
- Roger and Adam show us the basics of installing aftermarket lights to your RC vehicle.
Axial Universal Light Bar Set (AX31152) goo.gl/at3ltQ
Axial 8 LED Light String White (AX31098) goo.gl/yFHpxU
3 Port High Output LED Controller (AX31097)
Traxxas LED Light Bar (Chrome) (Summit) (TRA5684)
RC Car Flashing Light Kit (INTC23295)
Visit our online shop rcstreetshop.com/
- We ship for free over $89
- Price match any competitor's prices
- Do not charge Sales TAX
- Provide unbeatable customer support!
We make hobby easy for you!
Just added some 6 LED lights to my HOSIM 9125 and took it out for a night drive. Look and work fantastic. Being able to know which way the RC is facing with the lights is fantastic!
These videos are very well done. I don't know what gear your using but the production value is on point! You two are great personalities for this. I'm so happy to see a hobby shop using TH-cam in this way. Such a smart marketing decision.
Thanks for you support Jesse!
I just got done bashing in the backyard with my kids and my slash is covered in dust and supremely happy.
Yes, very much so enjoy your videos! Very educational!
Thanks Roger & Adam Great Tips on LED's
Thanks for your support!
Thanks, man! I'm thinking of putting lights on my customized BIGFOOT 1. This video is probably going to come in handy.
Thank you!
Hi,
Very grateful to both of you. I benefited alot from you.
Have a great day
Thanks for the led hook up show 👍👍
Top Stuff, this was the first Video I clicked on and its the only one i need 😁
Great Job and Thanks.
I'm getting my 2 wheel drive slash ready for Race season coming up here in Tempe in November. I'm totally going to rock your decals.
I just bought a used 2wd slash also. It has the brushless velineon system on it. I love it! Got a great deal on it and would love to do some off road racing with it at my local track! What type of racing are you doing with your slash?
I love my slash and I've also upgraded to a 2s LiPo which is a 7.4 volt 35c which is the lowest recommendation as far as I found.
Yeah I have a 2s 25c and a 3s 25c or 30c I can't remember off hand. The 3s is crazy! It's honestly almost too much for a truck as light as the Slash is lol!
I always liked y’all! Ever think about doing talk show radio?👍🏼
Thank you for your comment...we'll pass info to the owner!😎 its cool to know that you guys like us that much :)
I'm super interested in the short track racing near my house. I'm running a castle 3 4 pole brushless motor with a castle ESC upgrade and fan. But I am running the stock rear end gearing and shocks.
Man he sounds like Seth Rogen
Was that a fart?...... I can taste it.....on my tongue..... is that onion and ketchup?.......... now that I think about it, those tuxedos are fucked up.
Seth Roger
He doesnt , rapist
Two thumbs up learned a lot with your videos
Loved your video. So I have a tamiya 1/10 CR01 UNIMOG. I want to add 6 lights to it as the instruction manual says. It only shows where the LED'S are installed. What do I need to plug the 6 lights into? And do I need a switch in order to shut the lights on and off from my transmitter? Thanks
These guys are super cool. I've talked to them on the phone and they are no different than they seem on TH-cam. My truck is way better for having talked to them. thank you for your vid
Don't forget about other aftermarket option light bars and light buckets. Onetoomanyrcs has some great light bars and RC4WD has some great options as well. Some people like me don't like running off the receiver and chose to hook them up to a 9 volt. I've done the receiver before and it gets annoying when you have roof lights. Having to unplug them and wires dangling. Many light options out there.
Great info! Thanks!
Zach Novosad hey, how long did your 9v light mod stay lit on a single 9v?
I got the keliwow fighter 1 & got lights for it plugged it into the 3rd channel but there is no 3rd channel switch on the transmitter & also do I have to get a bigger battery to handle it came with a1500mah? thanks
Great video on How To..... I have some LED lights and it come with a JST connector which confuses me. I've seen this JST on other things like a fan. But my question is where do i connect that JST plug ?
JST may be connected to any power source with 4.8-6V and you may plug it in any empty receiver cannel. Receiver plugs are different, as they have three connectors (negative, positive, signal), but you may still plug something else in there. So you want to plug JST into just two (negative and positive) connectors in the slot.
Does using the Axial high output LED controller preclude the need for me to use a BEC? I'm planning on installing an eight LED lightbar plus four tail light LEDs on my Axial Yeti kit that I'm building.
Where are you guys?
I enjoy your information
How many milliamperes can the receiver supply to the lights. I would think their is a limit on the number or size of leds’ you can install as far as power demand. I guess you could install a mini relay to power the lights if the power demand gets too high
So im new to rc and just bought a CEN F450 and adding after market front and rear bumpers that have led lights in them as well as a light bar on the roof... so 3 things with lights.. what light controller would I need to make them work?
I have a Feiyue Desert Eagle 3 and bought a light bar for it, but it has a 3 wire plug and the rc only has 2 wire plug place, any suggestions?
I have a axial can am rc and I know we’re my reciver is but I wonder we’re if I need to unbox the reciever or just plug it???
That's cool
Thank you
Will the Axial AX31152 fit older Traxxas Stampede
These guys are awesome
Thanks everyone for the kind words!
RC Street Shop hi i have a latrax teton but i got a G.N.H led light system for my teton and i was wondering what do i need to do because i get lights on but no power an steering...
Is okay to run lights through the bind or VCC port on receivers?
your website is down...I'm trying to get a lightning kit for my cr jeep.
Hi guys what's the size of the jst connector on the end of the light strands 1.25mm 1.50mm 2.0mm
I'm 3 years late butt turn signals for crawling are very annoying I might put them on my Kyosho 70' SS Chevelle and those type road cars for scale effect, thank's for sharing the tutorial 😎👍
Thank you for the comment!
Im getting into rc trucks and a fan of rock crawlers. I am looking to get the scx10 as it has what i am looking for. Also going to get a venom 20c 2s lipo i think its 4000mah. Someone said they get about 1-2 hours of run time.But i wanted to know how much the lights drained off your run time.
Not really a lot, actually so small that it shouldn't be even taken into the consideration.
RC Street Shop k thanks so much.
Anytime!
I'm looking into getting led lights for my arrma granite 4x4 blx, any ideas?
Do you have any videos with LED lights on the gift RC synalog 25
I need to know which cable to disconnect the lights
Hello RC Streeet Shop, My name is Carlos Rojas. I tell you that I have an RC traxxas Ford Raptor 1/10 scale 2wd slash, and I want to install that led light bar from the Pro Line brand, in addition to installing the front and rear lights to my truck. Which ones can you recommend?, My RC truck has only 3Ch model 6519 KA1867-R01 receiver. Ch1 Ch1 Ch3 Ch3. If I buy the led bar and the front and rear lights through amazon, can I connect them to my receiver? , Or should I change my receiver and change the remote control.? Excelent Video.
Que Pasada , Muy Bueno !! ;)
Nice video, I have a question can this led kit work directly from a battery source or those requires a receiver? Thanks
It is actually better to power it off of a separate battery.
hello sir
i and my team are in a compitision 4x4 land rover
and we want to put some Lighting sengor that open when the britnes drop at 25 lux can u help as out what sensore or 'kit' we shod buy
thanx
Try some robotics stores selling DIY stuff (RC stores normally do not carry these)
how do you connect 4 separate led lights 4 separate plugs to a 3 channel receiver?
Either by multiple Y-cables or by soldering into one plug
there's no slot in the controller for my remo hobby truck
Can you install led lights on an ECX Circuit truck?
Hey guys Where do I get the Piaa fog lights
I have a clone of an HPI Baja it only has a three channel receiver which all three are dedicated since I will be adding a kill switch to the third channel how would I install my LEDs and power them I have not been into the battery box yet so I’m not sure if these top trucks are like nitros and have a battery plug any help would be greatly appreciated I am new to all this and I’m feeling very lost
You need just to power them, use Y-cable and plug LEDs in any channel.
I have the MYTRICK rc light kit on my Gen 8 Scout. It seems to turn the whole truck off if I am going through deep water. I tried putting conforming coating, and it does the same thing. Do I need to ditch the light kit?
You are shortening it somewhere while going through the watter
@@Rcstreetshop I ripped out the old light kit for my Scout. I need one that is waterproof. Any impressions on this one? club5racing.com/ezon-led-lighting-series-for-redcat-gen8-body-waterproof/
Mine broke need a video how to fix it the wires ripped apart
How can i add lights to my RC Drift car with only 2 channel receiver?
Via Y-cable or splitter
Can I add this to Jeep bodyshell for the nitro rcx gas powered the guy said I could as long as it’s 1/10 shell the product I’m changing shell is Monster Truck Radio 1/10 2.4Ghz from nitro rcx
With aftermarket stuff you really want to double-check. Everything is doable in RC world, but there are no guarantee that mounting holes, would perfectly match etc and you would need to make custom bracket etc. So I recommend to check in-store with sales or tech, to make sure that everything is perfect.
Do you guys sell the velineon upgrade kit and lipo batteries?
Sure we do, give us a call 562-425-9000 or visit www.rcstreetshop.com
Well I’m looking to make my traxxas stampede faster but the velineon kit is very expensive
Any suggestions
The least expensive upgrade is - gearing. Try changing gears first.
and you still be able to run Lipo batteries with your stock Motor/Esc (which is faster), just don't forget to switch mode.
Will that front bumper fit the yeti score TT?
Its for SCX10 so it won't.... unless you're willing to make some custom mountings
RC Street Shop ah okay. Is there any bumper that's along that style that would fit? Thank you, love your guys' videos.
Give us a call and talk to Roger...he is the only right person to ask and he is off today (unfortunately I'm in 1/8 buggy). We have a lot of stuff which sometimes only he know we have. Our phone number is 562-425-9000 10am-7pm PST
How to fit lights in my 2855 rc jeep
It is hard or even impossible to explain in the comment section how to do something like this. Stop by the shop and we will be happy to help.
The light bar into the servo kinna makes it hard to open and close body without tugging the line. What should i do?
Use standard servo connector in the middle
@@Rcstreetshop I should run a 2nd servo?
No add a basic servo extension and every time you need to take it apart just unplug the cable.
@@Rcstreetshop good to know. Thanks for the tip, I found a 2 way so I can also add a set of LEDs for headlights and taillights.
I see all those parts on the wall and I have a nitro rustler 1/10 I need parts were do I order
Give us a call 562-426-9000 we're in California
they had dirty shirts on 7 years ago i hope they cleaned up some if they are still around.
Big guy sounds like John C Rielly lol
Can I add a bodyshell Jeep on a nitro powered car with these lights?
Sure you can, you just want to double-check scale and make sure that you have a spare channel on your receiver or get a Y-cable.
RC Street Shop ok what’s a Y cable
it is a splitter for receiver, in case you have 2 channels only and you need to plug additional stuff in it.
How to put ped lights on my wltoys a959b?
I'm sorry we're not familiar with this one
Where did you buy that light?
RC Street Shop of course 😎👍
Do these need to be run off a lipo?
Battery type doesn't matter, Lipo is just a power source.
Can u do this to a tank?
Baconater1970 idk
What front bumper was that
that was original Axial
what brand is that truck
That was Axial.
why do my lights strobe when I turn the power on?
LEDs need a special setup, if you power them off of the battery they will strobe.
So, on my receiver I have 2 ports open ; AUX and BIND. In what port do I plug it in ?
AUX port would do it.
Thanks
maarten govaert plug it into the bind port, turn on your tv, then turn on the rc car, then, you will summon the ultimate hidden government free energy device to communicate to the aliens. DO NOT TELL THEM THE KRABBY PATTIE SECRET FORMULA!!! Or else Obama will rig the election of 2021 in Bush's favor. Then 11/9 will happen and all the Mexicans will die.
Dustin Short I did that device is dope
What can I do if the wire does not reach the receiver?
Servo wire extensions should do the trick. They come all sorts of different lengths.
The best rc truck, car, boat, and helicopter is hpi racing they put real mini engines that run on nitro fuel and the parts are so realistic.
It looks like your'e die hard HPI fan :)
RC Street Shop your right
Rc street shop home much for you to take a look at my rc car that isn’t responding with remote ❓
Good video but I would've just cut a few inches off those wires and you'd have alot more room.
What if it turns on and then just turns off
How to add please tell me
It is hard or even impossible to explain in the comment section how to do something like this due to a lot of variables. Stop by the shop and we will be happy to help.
What about nitro trucks
U guys should go to rc street shop I went there and they had really good deals for cars
Mine dimming when reversing car
It may, but only if the voltage drops due to some kind of load (wheels got stuck, acceleration, etc).
Hi I can not find a receiver box on my rc car
It's could be all-in-one unit or something like this...what car is that?
It is a Hugine 1:16 beast slayer
Unfortunately, we can't comment as we don't know anything about it....
Ok
I would like to have lights on my car
what is the name of your battery? please report back to me. Thanks For Make This video
That is a Venom Lipo battery Roger is using.
I didnt know Seth Rogan was a hobbiest!
He even runs the shop now...lol
There
And if u are a beginner u should go tgere
Very good information and instruction; I just have to say I was a bit disappointed after all that work installing that bumper; we didn’t get to see the final product on display!!! 😢
nice! check out my Xmaxx
Seth rogen? 🤔
nah, Supreme leader!
Can you get bigger overstuffed fingers to do that ? lol ...
To much talking cant listen anymore 2mins to much
Thanks for your feedback