Mercedes-Benz W204 C300 ESL EIS by pass, car does not crank, ESL issue, Electronic Steering Lock
ฝัง
- เผยแพร่เมื่อ 12 ม.ค. 2025
- I had an issue one morning that the car did want to start and there was no crank, to find out it is the ESL issue and this video is to show you how to start to move it or get it to the shop to get it fixed.
I had a same problem and tried it and did work,and what I did also was that I turned off and started again and worked and you saved me tons of money and lots of time that if I had to go to dealer and dropped the car and God knows how long I have to wait for car to fix and thank you mercedess Benz dealers that I called 10 times to 3-4 dealers around me and non of them picked up my call and encouraged me to do something myself and did work.thank you with your good info and video and thanks to mercedes dealer that are busy drinking coffee and not picking up my calls and asking to leave the voice that they are getting back in day or two if they finished their coffee.🙏👍👍👍
does your car still start? did any problems end up coming up in the future? or is everything smooth?
sowhat ended up being thw issue with your car. did it neef a new starter relay?
I had to change the whole switch which is brain of the car(where you insert your car key to start) and costed me $2500 and no one else can do it because they have to program it otherwise your car alarm or other electrical may not works. Also dealer changed it and I think they changed it with used or refurbished part which they charged me for new part and happened the same thing in less than week and asked me to pay another $2500 to fix it again and they trying to tell me it is something else and I asked them to give me a trouble shoot report (scan report)which first they did not want to give me and I told them since dealer charged me 3 hours label at $195 per hour (which takes two seconds to do)then I should get it and when I got it, I review the report and it was saying in every section from each door from dash from every piece of electronic that system (mudual starter brain)has a poor signal or wrong signal. I called mercedes head office and after I under line the report and send it to them I got the call from mercedess dealer (Thornhill mercedess Yong and steels Ave toronto) and all of the son they want to do it for free. Because I cut them stealing from me and God knows how maney other poor mercedess owners had to go through this and pay for unrelated issue. So they had to change what they did changed it before and car is fine now.
Thank you for your video Mustafa, it helped me a lot, keep it up, there are many people who need your videos!!!
Thank you very much for explaining the procedure step by step, it was very useful to me....
Hi Habibi 😂, it worked for me like a charm. My mechanic said to take it to dealership, could be an Ignition switch . I called the dealer and it was $1250 for swit hours and $750 for starter motor.
Tomorrow, I am going to dealer and will just buy the fuse block.
Stay blessed 🙌
Did it work just by replacing the fuse block?
@MrVampiro82 No, I cut it and press the button to start the cat, it worked temporarily, do it once or get someone to take out and re-program ESL . Else you have to replace starter motor, if you do it too many times
What was the final problem and how did you fix it
also works on Mercedes C 250 2014????
it didn’t work for me c300 2009
Thanks, this could have been of help yesterday. The car is now at MB, I'm waiting for the cost of fixing it. 🥴
Much appreciated Mohamed, you're a legend. Saved me big time brotha' :D
What was wrong twitch the car happening to my car
It worked for me today. Thank you so much!
Salam Mohamed, many thanks it worked for me and managed to get the car to the mechanic, thanks again.
Yeah, but what was the real problem and what was the price?
@@champtouch3298^
Yes I need to know as well happening to my car now after trying to get a jump Mercedes c300 2010
in my experience, manual c300 2008 the first time it happened, i tried jump starting for like half an hour then twisting the wheel and it worked
the second time i tried twisting the wheel, jump start, pop start, removing the cover of the relay and removing and putting the 7.5 thingy back into the fuse box like this video and it didn’t work… our mechanic said to “just wait and keep trying”-had to get it towed back home and the next morning, it worked again after a jump start.
both times it would just say “take the key out of the ignition” with no other lights on and it wouldn’t crank.
i really don’t know what the issue is :/ i just had to let it rest
@@duhneez2068how are you doing with the vehicle? ever get it fixed?
Fam saved me a tow truck bill, blessings 🤙🏽🤙🏽
You can also use a wire if you don't feel comfortable with the relay.
Connect the top and bottom slots.
Wait wdym
@@keithvia6470 you can use a jump wire, I don't know how else to explain it just a small piece of wire cut exposing the cooper.
How to connect both ends of the terminal for a second.
This is happening to the models that use that system from around those years, EVERYONE report to NHTSA and to MBUSA, they have to fix this for free or a CLASS action will cost them more
Are they really going to fix it I’m going to call them now
@@nissiaget2itacademy569nah they not
Ty bro. I just learned a new trick.. I recommend you change those idler pulleys and possibly belt
It went for service already and we changed the pulleys and belt.
What was the actual problem with the vehicle? Did it need a new starter motor?
@@mohamedmoustafa6014worked like a charm thank you! Steering wheel works but when I put it in gear it will not move, any ideas?
@@onepeopleunited-lg7rxsame with me car starting bot steeeing lock 😢
@@onepeopleunited-lg7rxit’s your esl, you’d need to buy and esl emulator and have it programmed by a locksmith, way cheaper than going to a dealership. Sorry I’m barley seeing this comment now, wish I could’ve helped earlier.
This worked for me just now. Thank you God bless you sir🙏
What was the issue
Great video what fuse and relay are those control?
Thanks bro! My steering is still locked so I can’t steer it anywhere but I was able to move it at least
Thank you very much for your advice! 😀
This is great to maybe get you out of a jam. But I hope you did some belt/pulley repair too.
What can I do to fix this what is the real diagnostic on this issue
how do you remove the green cover from the starter thingy?? finding it really difficult
NOTE: 1. When you put key and turn to position 2, the lights on the dash are supposed to turn on, if not, the the key is the problem.
2. As soon as you put the key in, you can hear the ESL motor under the steering column turn to the unlock position and hear it turn again when you remove the key to lock the steering, it is very obvious.
I had the same issues. I almost gave my car away. My friend fixed it for me. It's an esl issue. He had to removed the steering assembly to replace a part.
Please can I contact you for help. I have this same issue but it’s on a 2016 Cla 250. I can’t figure out what fuse and relay to pull cuz it’s different on mine
Hi, i have the same problem with my c220 2016 , good battery, good relay also have good ground but doesn’t start with the key i can only start it by removing the cap from the relay and touching it then it start stright away , you have some advice please ? Many thanks
Hi ,Mohammed, I have the same problem, how do you fix it?
I have same problem, I start the car this way as on this video but my steering still locked, is any way I can unlock steering? Thank you
No you’ll need to replace the ESL
@@BRZZN these idiots. Don’t listen bro. It is a antitheft device. The ESL is broken. In the lock position. That’s why you’re fucking steering is locked. The motor is fucked. It is an antitheft device.!!! fuck🤬🤬🤬🤬 all these Mickey Mouse mechanics on TH-cam thinking they know better fix the fucking thing properly or you can have the same fucking problem!!!!!!
It’s the ignition module in dash that you insert the key into happened to mine it’s $2100 to fix and it’s a dealer fix only
Mine was not, i just had a key shop replace my esl with an emulator and its working fine now. $450 fix.
21 hundo is crazy
@@taaswindle4737400 fair?
Very useful, thanks!
I like your shoes😊
Hello please I have same issues, please if the fuse board spoil it can cost the same problem or
My car does the same thing but i have lights on the dash and after 3 or 4 tries car starts normally i wonder if my starter is going bad or something else
Thank you
The car has startet
But I can't drive to the mechanic because the steering wheel is still locked
Any suggestions??
thank you so much 👍👍👍👍
How did you open the green relay box????? Please help I’m trying to do mine now
Pick tool or a small flathead screwdriver
What’s the fuse that you take out and put back?
What about the steering wheel still locked on it after it start how is that not disengaged?
I have the SAME question!!
My question is:
"If the ESL fails, will it generate a generic or brand-specific error code at the OBD2 level?"
I faced with same problem , i started the car by same technic, but i tried to star again can't start .
What is the main malfunction?
Hi Mohammad,
I’ve managed to run the engine as in video do you’ve any fix for steering locked? So I can take it to mechanic please?
I got the car on but my steering wheel is still locked
What was wrong with it my car is doing this now
@@yigokagedid you figure out was was the problem my car did this after trying to get a jump bought a new battery and does this now
@@nissiaget2itacademy569 dude I left my car at my coworker’s house and then came back the next morning to get it towed but my car turned on with the key and everything was fine lmfao idk how tf it’s even possible but yeah god is good I guess 🤣
Yes he is
Will this work if it says key doesn't belong to vehicle. Both of my fobs stopped working after fob battery replacements
I have a c350 2013, i juste remove the fuse 7.5 amp and put it back and worked. What dose it need to be replaced?
This is a temp solution to get the vehicle to start and take it to the nearest shop for repair, that would only work if the steering wheel is not locked. The ESL needs to be replaced with a new one or you can remove it and program an emulator.
Thank you very much. I really apreciate it
What kind of relay is that ?
Ignition, starter ,or eis or esl?
Starter
You can by pass the system but so can the car chiefs😂.
Car still needs key fob
Hi Mohammad Brother, I've changed the relay and new fuse, still won't crank, any ideas ?
The steering wheel lock , if the steering wheel is locked it won’t start
I believe this only works if your ESL fails in the unlocked position.
Just worked for my car thanks bro, what the permanent fix tho ?
9/10 you have to remove your ignition switch and have it connect to an emulator to have it "coded" his video is how to get your car started to get it to shop or somewhere safe if it's not your home parked etc.
Not shorting your car out and going to a mechanic and replacing your ESL.
How do u get the cover off the fuse
Did u find a answer yet having a hard time taking the cover off
@@broderickj7494 no had to get new car
Fking cover is so hard to take off unless you destroy it. No way shape or form that sh*t coming off easy. No way Jose!
Work perfect thankyou
How do I get a wire like that?
And If y have start eror this wil work?
Is this a common failure in this car? We have a 2018.
Yes, it happened to me 2 years ago. It is a pain in the ass to repair and expensive.
HELP. Key will not turn at all anyway to bypass the ESL without spending 1000$ the negative and positive on battery touched and now it will not start the steering wheeel is locked
@@yoknowkyoknow9935 check the main fuse it probably blew
@@mohamedmoustafa6014 no fuses blew I’m thinkin it’s the ESL I can put key in lights on just does not unlock wheel for car to go to start
@@yoknowkyoknow9935 if the steering wheel is locked then it would be very challenging to unlock it. I’ve seen some ppl saying that they successfully unlocked it but banging on it from the bottom.
I did this and the car started, but when I turned off the ignition and tried to start it again, the problem returned again.
I understand what you've done there. But I don't understand what an emulator is that replaces the ESL. Could you explain please.
The EIS emulator is a device that replaces the mercedes ESL for half the price and you don’t have to worry about being in the that situation again.
Find someone in your area that would do the job and program it for you.
@@mohamedmoustafa6014 Thank you Mohamed.
@@mohamedmoustafa6014 don’t listen to him man it’s gonna be fucked up again don’t use an emulator you just need to replace the ESL motor. The whole fucking module. OR else is gonna be fucked up again don’t listen to these idiots!!!!
Did you ever find out what it was?
Me puedes decir cual es el fusible de los espejos Mercedes 220 W204
Thanks brother
Will this only work if car’s steering wheel is unlocked?
I think, Yes
What if I try the bypass and the motor cranks but doesn’t start
??? Any answers
@@martraimoore9552I’m dealing with the same shit my car crank but doesn’t start I think I might change the motor fuse relay
@@martraimoore9552you fixed yours?
I am having the same issue tried the hack but cranks only no start anybody got anything ?
Check battery level, must be full power
You did not address if the ESL has failed in the lock position, yes you "might" be able to start the car, but you cannot drive it as the steering wheel is locked.
You’re right, mine was not locked
What happens if you keep doing this with out fixing it ?
You’re risking to lock the steering while driving or while its parked. This is only temporary fix at your own risk to move the vehicle to the nearest shop.
My car doesn’t recognize the key. Key turns but doesn’t crank doesn’t make click sound I don’t get any accessory lights.
I have the same problem. Did you get it fixed?
@@Saj1.02 yes for me it wasn’t my eis. I blown a main fuse for the eis it was under the carpet of dash on passenger side
What kind of Mercedes mine is C300 2010 will look for this main fuse this happened after trying to get a jump I feel it’s a fuse as well
Excelenteeee broooo
Starter relay short to battery meaning
I tried this and the car wants to start but doesn’t turn over
How do you fix this to where you don’t have to keep doing this?
did you find any solutions?
Did you sort it out?
So the dealership replaced my battery and that I guess fixed it for me.@@lxcki9290
@@Saj1.02 I did not, the battery was replaced and it has been fine ever since.
C200 no cranck need help
I got the car to start but my steering wheel is locked. How can I fix that?
There is no way that you can unlock the steering, unless you take it to the shop and they take the ESL out
I got the car on but my wheel is still locked…
Gracias 🎉🎉
I can’t get the darn relay cap off smh
the engine sounds very healthy
He eats his greens 😂
What was wrong with the car this is happening to my car
Hello..I see this video and good.I start my caar .what must to change that egain start normal? Thank you
Hi, you have to either replace the electronic steering lock ESL, or have somebody install an emulator instead of the ESL to get the car to work properly again.
@@mohamedmoustafa6014 thank you
What was the real fix?
@Joby Fluorine I think EIS is good, it recognizes key. I do not hear the ESL solenoid. Dash does not light up either. So agree, ESL.
@Joby Fluorine yes, im not a mechanic but i know that my problem was the esl and i took it out and replaced it with an emulator that works just as fine.
The real fix is either you replace the ESL or take it to some one with can put an emulator instead of the ESL and program it.
Forgive me for my ignorance, but what is ESL and what is an emulator?
@@jimmymanan5997 Electronic Steering lock
Hello brother
Can you link me the EIS emulator? Or a youtube video cant find anything
Will the steering still be locked? Is there any way to unlock it?
I was lucky that my steering wasn’t locked, there is no way around it if its locked.
FYI This won’t work for 2013+
ألله يحفظك من كل شر يارب العالمين
I tried this and it did not turn on, does this mean it's not my ESl EIS problem? I also checked all fuses
Your starter motor
Did you get it sorted? Was it the ESL?
I got the car to turn over but the shifter won’t move anyone have any ideas ?
Pop shifter cover off and there is a yellow button in there. Push down on yellow button and shifter will be free
Yes, you need to push down the yellow button (with a pen) and move to D or R while holding down... Yellow button under the leather shifter cover, just pull up or use yr emergency key (inside yr remote key) as a lever to lift the leather our
السلام عليكم اخي انا عند نفس المشكلة شوالحل لوسمحت
وعليكم السلام، الحل هو تغيير ال ESL بآخر جديد، أو استبداله بال emulator.
👍
I did this to mine the car did start. But when I put it in Reverse it doesn’t do anything it’s basically in neutral. And then Neutral works. But after that it does not want to go into Drive at all like something is jammed someone please help
Check your transmission module
I have the same , mine is c203 2003
Tnx
Thanks for sharing.
How to tell the world you shouldn’t be driving a Benz