SKODA SUPERB MK3 / VW . ELECTRONIC REAR BRAKE PAD CHANGE THE EASY WAY

[@mshahid2898]

Superb

[@patrickahearne8770]

Excellent video. Plain English, straight forward, top work.

[@everybodyneedsadave]

Thank you

[@ianwarren8316]

Really good video generally but….
Wrong wrong wrong!
Do not grease bolts before tightening them unless the manual says to do so.
Torque setting are either lubricated with the lubricant specified or are more commonly quoted dry.
If you lubricate a bolt and then use the torque wrench setting for a dry bolt your over tightening it and risk thread failure or bolt stretch and failure!

[@antoniodajti5841]

You can reset electronic brakes with 9 volt battery two wires unplug brake cable from piston and connect the wires and electronic brake piston opens up no need for diagnostic tool

[@everybodyneedsadave]

No I didn't know that, but I had the tool so might as well use it
Thanks

[@bufftony01]

Thank you so much
This is the help I needed

[@everybodyneedsadave]

@@bufftony01 you are welcome

[@ptitdop54]

Hi and thanks for your video.👌
can you confirm to me that it's 6 pans key of 7?

[@hackedoff736]

Very helpful but shouldn't you rewind rear calipers rather than just compress them?

[@everybodyneedsadave]

Both thanks

[@hgvdashcamuk5971]

Does the Ancel VD500 work just as well in winding the rear caliper back? Looking to replace my brake pads/discs but didn’t want to spend huge money on the reset tool.

[@everybodyneedsadave]

Hi sorry for delay in replying, yes should be OK

[@everybodyneedsadave]

I need to sort out my editing skills, sorry for the duplicate bit at the end . Whoops

[@Smartskaft2]

I thought I was going mad there for a second! ;)

[@christinemcburnie6462]

very useful

[@everybodyneedsadave]

Thank you

[@battlestarone]

Good vid but doing it on grass,,very dangerous!!

[@everybodyneedsadave]

It was very dry but you are correct
Thanks