Question, why unlock with imbus? Can you not take out breakdisc (one screw only), remove old break pads and use the old school break cilinder pusher, to push open the cilinders? This to avoid having to discusconnect the imbus bolts, which are normally a bit tighter?
Ahoj, nebude jednoduchšie obísť diagnostiku zhodiť motorček vytočiť po doraz potom zatlačiť piestik? 🙂týmto spôsobom s diag. neviem či tam dokážeš dostať nový kotúč aj s platničkami.
Cauko, robil som to presne ako ty ale vzdy som stroskotal na manualnom zatlaceni valceka, nejde na doraz chyba tak 2-3 mm a nejde nasadit strmen na nove platnicky. Robil som to 3x a vzdy to iste, ani silou neslo zatlacit stahovakom uplne na doraz, v com myslis ze bude problem? Dik
Thank you for posting this but you should have the discs at the same time. They are in very bad condition
Thank you for your service, this made our job easier. My son and I tackled this today and breezed through it after watching this.👍
do you have to buy the VCDS software? unsure how much it is or if the cheap blue cables will work off ebay
You did the whole job one handed. Gj 👏👏😉
Can you change brake disc please?
Thank you for the amazing tutorial
This helped me to change it on my Tiguan 2018 🙏
very good job done by one hand!😉 Next video about change the brake-disc 💿🚗
You did all this only with your one hand
Good job.
No copper grease or opening of the brake fluid reservoir cap?
I thought this is an one-man job. Now I just realise it's actually an one-hand job...😶
Your brake discs also need to be replaced
Yes but am moneysaver
they look so rusty for a golf 7
We own a 2015 e-Golf that looks much, much worse than this. The quality is ludicrous.
thanks for sharing. how do you make correction kilometers on this model?
Question, why unlock with imbus? Can you not take out breakdisc (one screw only), remove old break pads and use the old school break cilinder pusher, to push open the cilinders? This to avoid having to discusconnect the imbus bolts, which are normally a bit tighter?
Super, diky za návod 😌
Can you some in a video how to change the seat belt on the driver's side on the vw golf 7?
Thanks but you should have replaced the discs aswell
Hi. I see you have the check engine light on. I have it too. Do you know why did it went on? The car doesn't have any problems. Thank you
No new rotor!? Look at the rotor it’s completely toast that’s not good for your safety!
You think it's cheap ne?
Nice! Very useful video 🙂
How do your brake discs looks so bad after 109000 km? Do you live in a salt mine?
I have problem with my Golf 7 when i go reverse and press brake i heard some knock noise
Very helpful. Where you bought that key on min 7:31 ? Thanks for video.
Good job 👍
Ahoj, nebude jednoduchšie obísť diagnostiku zhodiť motorček vytočiť po doraz potom zatlačiť piestik? 🙂týmto spôsobom s diag. neviem či tam dokážeš dostať nový kotúč aj s platničkami.
Great job
Have you ever came across an SFD locked vag yet whilst trying to do rear brakes? If you have did vcds unlock it?
not yet. vcds will also be able to unlock SFD. obd11 can unlock SFD already. VCDS can unlock SFD only if you have a GEKO account.
your car stay one year in the Océan ?😄
Cauko, robil som to presne ako ty ale vzdy som stroskotal na manualnom zatlaceni valceka, nejde na doraz chyba tak 2-3 mm a nejde nasadit strmen na nove platnicky. Robil som to 3x a vzdy to iste, ani silou neslo zatlacit stahovakom uplne na doraz, v com myslis ze bude problem? Dik
A musí sa cez diagnostiku vypnúť elektronicka parkovacia brzda?
Ahoj posli mi prosím na teba nejaký mail chcem sa informovať ohľadom výmeny bŕzd ďakujem
@@sonicQ7 cauko myslel si mna? Vymenil som to ale uplne inak.
@@robertznidarsic3524 a ako si to menil?
@@sonicQ7 th-cam.com/video/5kWHFDzoWyk/w-d-xo.html
How many pins are on rear brake motor conector? 2-3 or more?
I think 2
100% 2 pin
Thanks for your contribution, however I'm truly amazed at close to 100K subscribers and such poor video work / editing etc!
Ahoj posli mi prosím na teba nejaký kontakt, email chcem sa niečo informovať ďakujem
using two hands will be better
Those disc are really bad
Worst job I have seen yet
travail de cochon.disque hs😄