I fell off my chair laughing at 1:25. I know nothing about cars so I found you throwing a cinder block at the tire to get it off hilarious. One year later after subbing and you are still the best channel on this site, hands down.
Yes, note no injury there, on the other side, however, because Levi was using the masonry block as his chew toy, Andrew had to fall back to using the spare tire - guaranteed big bruise came from that interaction.
10:55 .... man, I love the camera angles you find to ensure we see it all. Others would not bother and just say "it was difficult to access, but I got it done" yet you spend the time to get the camera in place for us. Thank you so much!
Loved the cinder block removal trick! I once used a steel Scuba dive tank to encourage a stuck wheel to let go. Andrew, thank you for no commercials, & no request for thumbs up. Your practical way of doing things is fun to watch! -Thumbs up!-
@AstronomyToday At least when a gravel or dirt road gets wash boarded or develops potholes you can just run a tractor or dozer over it, that's what my grandfather did for years at his place. Got all the neighbors to chip in some money for a load of gravel once every 4-5 years and then spread it with his tractor.
Yeah, I squealed when the wheel flew at you! My Mitti bitti SUV will be 20 years old this November. 260000km and never missed a beat. My Dad bought it for me to learn in when I was 15 and I still have it. I've had other cars as well, and it's no longer my daily driver, but I'll never get rid of it, I'll drive it til it dies.
Andrews face when he hit the tire with the tire.....He was like.....shit, did anyone see that? Oh right, I can just edit this. Then he doesn't. So it was funny. I LOL'd for real. My wife like....what you doing in there?
Using the spare tire to get the original tire off is quite a common way to do it... Though, if you do it a meter off the ground then you’re asking for what you saw in the video.
Love your channel Andrew!! Thanks for all of the information you share and the laughs you provide. Never thought excavating would be so enjoyable to watch but your videos are perfect for my attention span and perfectly edited the way you speed it up at the right times to keep on pace. AWESOME Channel, keep it up!!
The two bolt holes in the rotor are so you can thread bolts into them and get the rotor off without having to pound on it so much and I would also put on anti seize on the face of the wheel bearing assembly and on the face of the rotor which touches the tire just to make it easier to get off later.
Timothy D, Andrew’s stated in the past that he’s got a few roof leaks going on and the place is not insulated. I’m sure he’s up there quite a bit in the summer.
get it done Andrew, what makes it so interesting for me is, you have the equipment, the energy, perseverance and a natural sense of what to record and what to edit, i always look forward to viewing your upcomin challenges, successes and the occasional unknown curve ball that as a hitter Andrew you always hit them outa of the park cause of your love for the game and it shows, that what makes it for me (also your love for Levi) so in the spirit of always moving forward, thanks for taking me along once again
Nobody sprays WD40 on such stuck wheel. If you have a flat next to the highway you are going to wait for WD40? I’ve used spare wheels many times to smack them off. Doesn’t harm anything and the job is done in a second. If the WD40 gets inside the brake then you’re screwed.
Love the cider block trick. You need some anti-seize on those brake disks to stop the corrosion. Levi really seems to have sense of I need to back up and stay away.
Sometimes I wake up in the morning and get a feeling there is a new video from Andrew, and sure enough I'm almost never wrong. Keep doing what your are doing (and what makes you happy)! You're the man, my dude.
Andrew, some hints from someone who has spent a lot of summers changing brakes: - To remove tires: Hammer the inside of the rim with a nylon hammer. Takes 2 hits max. - To remove disks with handbrake drum included: Do not hammer them like you did. You can adjust the tension of the hand brake through a little hole next to the rim screws. Use a little light, untight the shoes from inside and disk comes out easy. - Try to get copper grease for the brakepads. Set it where the metal of the brakepads touches the brake calipers. Keep up your awesome videos!
Your pins that the caliper and the pads run on are all rusted up. That is why your pads are shot on just one side of the rotor. Lots of brake grease during reassembly will help a lot.
Hello Andrew! Your videos are really authentic. I'm really surprised what you do there. It's fun to watch you. No matter what job you do, it always works. I have great respect for it !!! 👍👍👍👋
That lift was the best thing since a pocket on a shirt for you. I see your busy making videos again. Levi is showing his age. Make sure his pillows are just right!! Love the videos Andrew
Thanks for the great video mate ,here in Australia they call these Mitsubishi challengers ,they are based on their ute the triton with the full ladder chassis ,they are one great little 4x4 had one years ago ,towed trailers off road mainly beach camping ,son now has one and he beats on it like a red headed step child ,and it just keeps going .One thing I've learnt is spraying used cooking oil underneath coating chassis and floors and drive on a dirt road ,which helps it set protecting it from rust .Cheers from down under.
Been pressing brake pistons back in with a C clamp for many years and never had one leak fluid like that (replace it). The rust you guys deal with is REAL. I'm in Vegas and planning to move to Kentucky, guess I should get a couple extra cinder blocks and stock up on cut-off wheels and grade 8 hardware lol. Great video, Andrew - keep em coming =)
Your channel is my favorite on TH-cam! I live vicariously through you. You are an inspiration too many. We appreciate you and all the content you create. It is my understanding that when compressing the caliper you should have the fluid reservoir uncapped/open so that the pressure can be relieved and fluid can back flow.
One thing someone else mentioned is at the beginnings, you cut right to the video. No liking, subscribe, bell, merch... No 5 minutes of non sense for a 10 minute video!
Have to say, of all the people I subscribe too, I never get board with Andrews. His abilities as, mechanic, builder, plumber, electrical and many more is amazing. Nothing is too old or too out of shape and shows you don’t need the best and newest of everything to get a job done. Keep er lit (Irish supporter)
Dude..you just made my weekend much better, 3 videos back to back? nice!!! less editing and more uploading is the way to go I guess.... We all enjoy your work, Thank you!!
*DRIVERS SIDE REAR.... Should clean those Pad Pins every time and ad some White Grease or Anti Seize on the pins, that's why the inner pad went bad... the outer pad isn't or was barely moving due to lack of lubrication on the Pad Pins, thus barely pushing on the rotor!*
I've been watching Andrew's work for the last year or two prolly longer. Sometimes I fast forward just to watch later and see something I may have missed. Other times I watch 'em again because to be honest, Andrew is a high-light of the day rerun or not . I mean this guy is so smart, honest and wise beyond his years, respects his dad, he is super positive,( EVEN THE VIDEOS WHERE HE'S "DISSED", HE SHOWS NO ILL WILL), not like some you-tubers. Although one can tell he's angry he'll not lash out. good job dad,(THAT'S TO YOUR FATHER HE RAISED YOU PROPER WITH "OLD SCHOOL" AND A WHOLE LOTTA RIGHTEOUS MANNERS). GO TEAM ANDREW CAMARATA ! !
I am looking for property in the Catskill /Saugerties area and hope to aquire it in the near future. You will be my first call. Your work ethic and ability to find ways to make things work are second to none and a rare gem these days. Well done with the channel as well.
parteibonza the weather is cool it’s winter down here I’m from just north of Sydney and the temperature is 15deg c (59deg f) sunny with a few showers today
I did not know it could be this entertaining watching someone else work! Keep it up Andrew and congrats on your success. You need a bigger shop and more toys and fab equipment!
@@Don.Challenger well I live in southern California, so my tolerance for weather isn't very high, even here. I require 260+ days minimum of sunshine and lollipops, t-shirt and shorts weather!
Andrew, watching you beat the shit out of the wheels with that cinderblock and the other tire had to have been the hardest I've laughed in a really long time. Thanks for not editing stuff like that out of your videos, it makes them so much more entertaining!
I always enjoy your videos. As a mechanic, replace that caliper as the piston seal is leaking. Or better yet take the caliper apart and rebuild it, would make for a great video.. also polish and lube those slide pins so the brake pads do not stick
hahaha i love the tire thrown at the tire on truck to knock it loose lmao your the best Andrew your videos are awesome to watch -- Please keep up the great content
I absolutely love your editing. The content alone is mesmerizing and incredible, but paired with your eye for editing takes it to another level. Really happy to see your channel taking off.
@@throngcleaver he definitely not caliper busted should have replaced the leak right away plus the pins. He didnt fix it so many steps he missed. Those brakes will fail with in 48 hours
Great video Andrew...seeing things like this helps when I need to work on something. You told them it popped...they said "What's your address?" Now THAT is true customer service & warranty replacement! It is sad that this is not still the normal in today's world.
Always add anti-seize or a layer of brake grease to the hub surface of the rotor and to the inside face of the rim to make it easier to take apart next time
So the rail grease can collect salt and grit and making grinding compound? My rails are covered and they still ask you not to grease them. I did it Anyway, but here I wouldn't.
Open the Brake Fluid cap when compressing the calipers or it can cause a caliper to leak when compressing it. I put Aluminum exhaust system on my 1976 Dodge truck and no rust or leaks for decades now. Was glad to see a new video.
You didn't grease your pins that's why your rotor was warn on one side. A little never seize between the rim and the rotor will help in getting the rim off.
5:28 like i always say, this channel is about 4% unintentional comedy on average
yea, I bet he's gonna feel that one tonight !! hehe
geekdiggy yeahhh buddy
I laughed my *** off at how he looked up at the camera, ALMOST SMILED, then looked away real quick.
yeah :-). I wonder why he did not put a nut back on so that the wheel does not come flying of.
@@egomaniac247 his body language said it all. A classic moment.
I fell off my chair laughing at 1:25. I know nothing about cars so I found you throwing a cinder block at the tire to get it off hilarious. One year later after subbing and you are still the best channel on this site, hands down.
Another addition to my toolkit, concrete block.
Don't forget to bring your SUV tire when it gets really tough.
Good one
Yes, note no injury there, on the other side, however, because Levi was using the masonry block as his chew toy, Andrew had to fall back to using the spare tire - guaranteed big bruise came from that interaction.
Give 'em a good bricking", like I always say. I't works well with the In-Laws.'
lol right now my parents in mexico are using a concrete block to sand the concrete repair in their vacation place lol
us: how many videos you gonna drop this week?
andrew: yes.
*send it
geekdiggy 50,000
All of them!
keep them rolling out !!!
probably buying his 10th excavator and wants some extra money
10:55 .... man, I love the camera angles you find to ensure we see it all. Others would not bother and just say "it was difficult to access, but I got it done" yet you spend the time to get the camera in place for us. Thank you so much!
3 videos in 24 hours, am I dreaming?
Same×-)
Seriously lol keep them coming Andrew
@canuckguy worried I have many
Sebastian. Right. And I hope this is an indicator of things to come.👍🏻👍🏻
BILLS TO PAY!!
Loved the cinder block removal trick! I once used a steel Scuba dive tank to encourage a stuck wheel to let go. Andrew, thank you for no commercials, & no request for thumbs up. Your practical way of doing things is fun to watch! -Thumbs up!-
That drone shot at the end was brilliant, that was movie quality right there.
Hello my friend writing with great pleasure🔔🔔
Usually when you say "Let's take it for a test drive," you tear through your property. I wasn't expecting actual asphalt. LOL!
And it must be spring in an off election year road has nice patching but no new paving.
@AstronomyToday At least when a gravel or dirt road gets wash boarded or develops potholes you can just run a tractor or dozer over it, that's what my grandfather did for years at his place. Got all the neighbors to chip in some money for a load of gravel once every 4-5 years and then spread it with his tractor.
@AstronomyToday I'll take the bad roads . Our taxes in new york are insane.
😂😂😂😂🕴😅😅😅😅😅😅😅😅
Hello my friend writing with great pleasure🔔🔔
I wish l could see Discount Tire’s cinder block wheel removal tool! Good video Andrew, informative and well photographed
Whats informative? To put a leaking caliper back on a car? LOL
We all know Andrew is a cowboy. Still informative
I use the tire trick. But a smaller tire. lol. The block could slip and damage the rim. A rubber tire won't.
Concrete, not cinder, not cement.
I tend to use an 8x8 timber section to loosen stuck rims.
Yeah, I squealed when the wheel flew at you! My Mitti bitti SUV will be 20 years old this November. 260000km and never missed a beat. My Dad bought it for me to learn in when I was 15 and I still have it. I've had other cars as well, and it's no longer my daily driver, but I'll never get rid of it, I'll drive it til it dies.
Andrews face when he hit the tire with the tire.....He was like.....shit, did anyone see that? Oh right, I can just edit this. Then he doesn't. So it was funny. I LOL'd for real. My wife like....what you doing in there?
lol...Levi was like "you ok bro?"
It was a shall I edit or shall I not edit moment! 🤔💨😵
Using the spare tire to get the original tire off is quite a common way to do it... Though, if you do it a meter off the ground then you’re asking for what you saw in the video.
Hello my friend writing with great pleasure🔔🔔
Drinking coffee, smoking cigar on fathers day watching Andrew. 👍
Happy father's day sir,enjoy
Drinking a rockstar smoking a cigarette. I do like your style sir.
Love your channel Andrew!! Thanks for all of the information you share and the laughs you provide. Never thought excavating would be so enjoyable to watch but your videos are perfect for my attention span and perfectly edited the way you speed it up at the right times to keep on pace. AWESOME Channel, keep it up!!
Bob i couldn't agree more! there have been times watching where i was just about to fast forward, then BAM he hits high speed!!!
kkkiii😅
@@outofcontrol9886
0😅😅
@@outofcontrol9886 😅
The two bolt holes in the rotor are so you can thread bolts into them and get the rotor off without having to pound on it so much and I would also put on anti seize on the face of the wheel bearing assembly and on the face of the rotor which touches the tire just to make it easier to get off later.
The slide pins in the caliper need lubrication or the brakes will drag.
Brakes wont last long without pin grease. Probably why the inside one was all ground out.
Andy, you really should have lightly lubed those pins. Actually you should have replaced those pins and lubed.
@@mikejohnson9118 no he should have taken them to a grinding wheel clean the rust off then lubed it
@@MAGWolf ya,a quick zap on a wire wheel and a dab of grease.
Another guy telling you how to do it!!!!
Made me happy to see the opening shot of the container castle, just because it exists - in all its glory.
Mikkel Hansen I was thinking the same. I always enjoy seeing the castle.
I dont understand why he dosen't live there. It's so cool
Timothy D, Andrew’s stated in the past that he’s got a few roof leaks going on and the place is not insulated. I’m sure he’s up there quite a bit in the summer.
George Horn III yeah it would be a challenge to heat cool that massive place without insulation
quality of your uploads keeps getting better and better!
get it done Andrew, what makes it so interesting for me is, you have the equipment, the energy, perseverance and a natural sense of what to record and what to edit, i always look forward to viewing your upcomin challenges, successes and the occasional unknown curve ball that as a hitter Andrew you always hit them outa of the park cause of your love for the game and it shows, that what makes it for me (also your love for Levi) so in the spirit of always moving forward, thanks for taking me along once again
Normal people: *spray WD40 on rim and waits*
Andrew Camarata: *grabs cinder block ...*
Guess you've never been in a shop . .lol
Well, thank god, it wasn't Cinderella we picked to use.
canuckguy worried ruber mallets are for pussies! 😂😂😂😂
Nobody sprays WD40 on such stuck wheel. If you have a flat next to the highway you are going to wait for WD40? I’ve used spare wheels many times to smack them off. Doesn’t harm anything and the job is done in a second. If the WD40 gets inside the brake then you’re screwed.
No normal person sprays wd40 on a rim. Just saying.
Watched 2 videos last night,and another one pop's this morning,good stuff outta you Andrew,love from Ireland.
Breen, his efforts this weekend are all for Father's Day.
Love the cider block trick. You need some anti-seize on those brake disks to stop the corrosion. Levi really seems to have sense of I need to back up and stay away.
Sometimes I wake up in the morning and get a feeling there is a new video from Andrew, and sure enough I'm almost never wrong. Keep doing what your are doing (and what makes you happy)! You're the man, my dude.
Andrew, some hints from someone who has spent a lot of summers changing brakes:
- To remove tires: Hammer the inside of the rim with a nylon hammer. Takes 2 hits max.
- To remove disks with handbrake drum included: Do not hammer them like you did. You can adjust the tension of the hand brake through a little hole next to the rim screws. Use a little light, untight the shoes from inside and disk comes out easy.
- Try to get copper grease for the brakepads. Set it where the metal of the brakepads touches the brake calipers.
Keep up your awesome videos!
Your pins that the caliper and the pads run on are all rusted up. That is why your pads are shot on just one side of the rotor. Lots of brake grease during reassembly will help a lot.
LOL love the block technique, Andrew always gets it done
They quit letting Andrew play high school football (American football) something about his blocking style was too unorthodox.
Hello Andrew! Your videos are really authentic. I'm really surprised what you do there. It's fun to watch you.
No matter what job you do, it always works. I have great respect for it !!! 👍👍👍👋
Andrew my man. Your channel is one of the most inspiring channels out there. If you’re not making money you’re not trying just watch this channel.
Air Bag install camera shot = 1st Thumbs up
Ending drone flying camera shot = 2nd Thumbs up
Hello my friend writing with great pleasure🔔🔔
رقية
I nearly choked to death laughing while eating a donut when he smashed that tire with a cinder block.. That's one way to solve it.
muhammad hamzah 🤣
Dear Lord
Шшщщ
Hello my friend writing with great pleasure🔔🔔
That lift was the best thing since a pocket on a shirt for you. I see your busy making videos again. Levi is showing his age. Make sure his pillows are just right!! Love the videos Andrew
What a great Father’s Day weekend watching all of these new videos! Thanks Andrew! Just ordered 4 more T-Shirts.....in appreciation!
Father’s Day...waiting for dinner and watching Andrew ....perfect 😎😎
3 videos in a day? Hell yeah 👍👍
ههههههههههههههههه هههههههه ههههههههههههههههههههههههههههه
Thanks for the great video mate ,here in Australia they call these Mitsubishi challengers ,they are based on their ute the triton with the full ladder chassis ,they are one great little 4x4 had one years ago ,towed trailers off road mainly beach camping ,son now has one and he beats on it like a red headed step child ,and it just keeps going .One thing I've learnt is spraying used cooking oil underneath coating chassis and floors and drive on a dirt road ,which helps it set protecting it from rust .Cheers from down under.
Excellent video, as usual, love your"can do" attitude nothing phases you, keep up the good work.
Alright, that’s fixed!
best catch frase ever
"Alright, that's fixed...well kinda" That's what I said to my ex wife when I signed divorce papers, but realized I had to pay alimony
lol is all i can say
i near fell of the chair him taking that wheel of
Lol onto the next job 👌🏻
Great vid Andrew I've done services and you done a better job then me 😂👍👍
Been pressing brake pistons back in with a C clamp for many years and never had one leak fluid like that (replace it). The rust you guys deal with is REAL. I'm in Vegas and planning to move to Kentucky, guess I should get a couple extra cinder blocks and stock up on cut-off wheels and grade 8 hardware lol. Great video, Andrew - keep em coming =)
Your drone shots are some of the best!! Keep up the great work.
Hi Andrew loving the channel, even my little Jack Russell Jill loves watching just waiting for Levi to appear on screen Tom UK
Yeah !!!! Thanks for sharing Andrew (prior to watching) :)
Your channel is my favorite on TH-cam! I live vicariously through you. You are an inspiration too many. We appreciate you and all the content you create.
It is my understanding that when compressing the caliper you should have the fluid reservoir uncapped/open so that the pressure can be relieved and fluid can back flow.
Love your channel Andrew!! Thanks for all of the information you share
"When all esle fails, Cinder Block" - Andrew Camarata 2019.
One thing someone else mentioned is at the beginnings, you cut right to the video. No liking, subscribe, bell, merch... No 5 minutes of non sense for a 10 minute video!
Austin Nipper yep i prefer that, the reason i subbed 👌👍
Have to say, of all the people I subscribe too, I never get board with Andrews. His abilities as, mechanic, builder, plumber, electrical and many more is amazing. Nothing is too old or too out of shape and shows you don’t need the best and newest of everything to get a job done. Keep er lit (Irish supporter)
Dude..you just made my weekend much better, 3 videos back to back? nice!!!
less editing and more uploading is the way to go I guess....
We all enjoy your work, Thank you!!
leaking caliper is not good also you should have cleaned the pins and the sliders
Knowing his style of mechanics he probably thinks the leaking fluid will lubricate the brake parts
Omg, two new videos in the same day😍
Really like that drone shot at the end. Nice job!
That is a classic Camarata "getter done" move with the cinder block! Thanks for all the entertainment Andrew!
*DRIVERS SIDE REAR.... Should clean those Pad Pins every time and ad some White Grease or Anti Seize on the pins, that's why the inner pad went bad... the outer pad isn't or was barely moving due to lack of lubrication on the Pad Pins, thus barely pushing on the rotor!*
You’ve had good luck with this truck.
This guy is spoiling us so much with back to back videos. No one can hate on this guy. He is a legend.
I've been watching Andrew's work for the last year or two prolly longer.
Sometimes I fast forward just to watch later and see something I may
have missed. Other times I watch 'em again because to be honest, Andrew
is a high-light of the day rerun or not . I mean this guy is so smart,
honest and wise beyond his years, respects his dad, he is super
positive,( EVEN THE VIDEOS WHERE HE'S "DISSED", HE SHOWS NO ILL WILL),
not like some you-tubers. Although one can tell he's angry he'll not
lash out. good job dad,(THAT'S TO YOUR FATHER HE RAISED YOU PROPER
WITH "OLD SCHOOL" AND A WHOLE LOTTA RIGHTEOUS MANNERS). GO TEAM ANDREW
CAMARATA ! !
there is not nothing this chap cannot turn his hands to.talented young man.best wishes from the uk
Well.I just figured out where the neighbors missing clothes line went.
A no frills video that had my complete attention. I think Andrew is some sort of hypnotist.
I am looking for property in the Catskill /Saugerties area and hope to aquire it in the near future. You will be my first call. Your work ethic and ability to find ways to make things work are second to none and a rare gem these days. Well done with the channel as well.
Always enjoy your videos, your a very knowledgeable guy Andrew. Hi from Australia 🇦🇺
How's the weather in AU?
footyshortboy gday mate
Love mr camarata's work
footyshortboy what part of 🇦🇺 you at
parteibonza the weather is cool it’s winter down here I’m from just north of Sydney and the temperature is 15deg c (59deg f) sunny with a few showers today
Aussie bogan Bloke the central coast of NSW
Wheel removal technique was ACE, particularly the 2nd wheel. Who hasn't done that, ever?
A good trick is to leave a lug nut on by a few threads.
‘In this one spot I kind of temporarily fixed it.....but not really”. I love these videos!
I did not know it could be this entertaining watching someone else work! Keep it up Andrew and congrats on your success. You need a bigger shop and more toys and fab equipment!
if that place didn't turn into a frozen hellscape every winter i'd like to live there.
For most all of Canada and a few north eastern states that is what we call close to Florida.
@@Don.Challenger well I live in southern California, so my tolerance for weather isn't very high, even here.
I require 260+ days minimum of sunshine and lollipops, t-shirt and shorts weather!
I love that wheel removal kit.
Andrew, watching you beat the shit out of the wheels with that cinderblock and the other tire had to have been the hardest I've laughed in a really long time. Thanks for not editing stuff like that out of your videos, it makes them so much more entertaining!
Nice closing shot! Great drone footage.
Awesome way to start my day!!!
"ok that's good. that's probably fixed."
woohoo! another visit with Andrew and Levi the wonderdog!!
Thanks Andrew..........from Canada's west coast
You've always had great content, but it seems to me that you've really stepped up the production quality recently. Great job!
Cutting to the Chase! Let's get this vehicle on the lift- and get it fixed! Stand Back!!
Another video hell yeah thanks andrew
I’m just glad your exhaust repairs look like mine! The first repair not the second attempt
I always enjoy your videos. As a mechanic, replace that caliper as the piston seal is leaking. Or better yet take the caliper apart and rebuild it, would make for a great video.. also polish and lube those slide pins so the brake pads do not stick
Me wondering who the blonde in the passenger seat is as Andrew pulls up.... it was Levi!!!!!! Haha
No, no, you missed her car exit - foolish man - she is the woman of long hair that lives in the castle tower.
Lol
You crack me up sometimes Andrew. I would hire you anytime to do excavation work, but stay away from my car. LOL
hahaha i love the tire thrown at the tire on truck to knock it loose lmao your the best Andrew your videos are awesome to watch -- Please keep up the great content
I absolutely love your editing. The content alone is mesmerizing and incredible, but paired with your eye for editing takes it to another level. Really happy to see your channel taking off.
Also love that you use an impact on everything.
Thanks again, I thought I was dreaming lol 😂 you are one beast of a mechanic that always gets the job done, the drone view at the end was spectacular!
Damn, it's corrosive where you live. Your videos rock...
Looks like he lives on a dirt road.
Your car is never free of dirt.
That car is actualy loocking good
That car is really solid. Some rust out really fast. That salt should no longer be used on roads.
I think they even put a salt brine on the dirt roads in the summer to keep the dust down. Figure that. No wonder they call it the rust belt.. 🇬🇧
@@AndrewCamarata You're a very hard working man.
Great video, I died when you used the cement block ......good stuff.
This was a great start to my Father’s Day Andrew, thanks.
That caliper shouldn't have been leaking when you pressed the piston back in!!!
He's well aware of that.
@@throngcleaver he definitely not caliper busted should have replaced the leak right away plus the pins. He didnt fix it so many steps he missed. Those brakes will fail with in 48 hours
@@KB325 I mean I give it a year
@@KB325 You obviously didn't watch the entire video, or didn't pay much attention. 8:55 If that piston starts leaking, he'll fix it.
@@KB325 You're not too bright. Didn't hear when he said "Its been 2 weeks since I changed those brakes", before the air bag install? -_-
Was that CinderBlock a Snap On or Craftsman ??
HF
Not long stumbled across your videos keep them up bud, loving them (Y)
James M Octy I got on a binge watching all his videos.
Remember you still have to eat shower and go to work! 😂😂
Great video Andrew...seeing things like this helps when I need to work on something.
You told them it popped...they said "What's your address?"
Now THAT is true customer service & warranty replacement!
It is sad that this is not still the normal in today's world.
every handyman should have a leather lazy chair and a ciment block at his disposal X-) Love your vids man !!
Has he ever sat in that chair though, seems to be on the go all the time...!
"Alright this video is done time to upload another"
Always add anti-seize or a layer of brake grease to the hub surface of the rotor and to the inside face of the rim to make it easier to take apart next time
Wow, someone is becoming a good drone pilot. Informative and well done. If I'm not careful, I may actually learn something here;) Thanks.
😂😂 hilarious, uses his fully automatic assault tire to take out the other tire.
5:28
Mr BellBell 🤣
You didn't clean the brake piston before pressing it back in. You didn't grease the rails (the two pins that go through the pads.
So the rail grease can collect salt and grit and making grinding compound? My rails are covered and they still ask you not to grease them. I did it Anyway, but here I wouldn't.
Love the ending drone shot! Beautiful!
Open the Brake Fluid cap when compressing the calipers or it can cause a caliper to leak when compressing it.
I put Aluminum exhaust system on my 1976 Dodge truck and no rust or leaks for decades now.
Was glad to see a new video.
Hey I’m a 15 year old and I love watching your videos and I wanna drive excavators and stuff you have any tips for me
He anticipated your question and answered it a few years ago, here: th-cam.com/video/mkSwl2i9IkA/w-d-xo.html
You didn't grease your pins that's why your rotor was warn on one side. A little never seize between the rim and the rotor will help in getting the rim off.
Dan Godbout agree 100%
Also anti-seize between rotor and hub
love the drone shots. Keep'em comin'!
Good job Andrew.....thanx for another great video......keep em comin........ :)