How to Make a Raspberry Pi Smart Doorbell
ฝัง
- เผยแพร่เมื่อ 26 มี.ค. 2020
- In this video, we show you how to use a Raspberry Pi 3 (you could also use a Raspberry Pi 4) to power a DIY Smart Doorbell. The smart doorbell opens a virtual meeting room for the guest when they press the button. It also sends a notification to your phone with a link to the same meeting room so that you can chat with the guest. Make two of these doorbells and they can join the same meeting room and be used as a video intercom system.
Sign up for Linode at linode.com/hackershack and get $20 free on your new account
See how we built it, including our materials, code, and supplemental instructions, on Hackster.io:
www.hackster.io/hackershack/s...
Get the 3D printable part files for this project on our Patreon: / smart-doorlock-37735441
USEFUL LINKS:
Follow Hacker Shack on Instagram:
/ hackershackofficial
Subscribe to Hacker Shack: goo.gl/qHjz4j
Visit our website for parts and project updates: www.thehackershack.com/
View our code on Github: github.com/HackerShackOfficia...
MATERIALS: (These are Amazon affiliate links)
M4 screws x 4
M2.5 screws x 4
M2 screws x 8
Female Jumper Wires x 4 - amzn.to/39n1n3i
JST 3 Wire Connector x 1 - www.adafruit.com/product/3894
STEMMA Speaker w/ Amplifier x 1 - www.adafruit.com/product/3885
Raspberry Pi Camera x 1 - amzn.to/2QKjA4A
Raspberry Pi LCD Screen x 1 - amzn.to/2WG8HV4
USB Microphone x 1 - amzn.to/3bnyF3S
Momentary Button with LED x 1 - amzn.to/2Jb4GQC
Right Angle Micro USB Connector x 1 - amzn.to/3amo8pI
Raspberry Pi 3 x 1 - amzn.to/39mfia3
MicroSD Card x 1 - amzn.to/3dvxNMt
MUSIC:
Oyasumi by Smith The Mister smiththemister.bandcamp.com
Smith The Mister bit.ly/Smith-The-Mister-YT
Free Download / Stream: bit.ly/oyasumi-smith-the-mister
Music promoted by Audio Library • Oyasumi - Smith The Mi...
Autumn 2011 by Loxbeats spoti.fi/34tPBBO
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/autumn-2011
Music promoted by Audio Library • Autumn 2011 - Loxbeats...
chill. by sakura Hz / sakurahertz Creative Commons - Attribution 3.0 Unported - CC BY 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Chill - sakura Hz (No ...
Skydive by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2uUKEmd
Music promoted by Audio Library • Skydive - Loxbeats (No...
Disclaimer
The methods shown in this video should be used
as a guide only.
HACKER SHACK ACCEPTS NO RESPONSIBILITY FOR
ACCIDENTS OR INCIDENTS ARISING FROM INDIVIDUALS
UNDERTAKING ANY OF THE TASKS DESCRIBED. IN
PARTICULAR, IF UNSURE YOU SHOULD ALWAYS CONTACT
A QUALIFIED TRADESMAN BEFORE PROCEEDING. - วิทยาศาสตร์และเทคโนโลยี
![DIY Smart Home Video-Doorbell with ESP32 and Raspberry Pi [ENG]](http://i.ytimg.com/vi/3w_xTNuditQ/mqdefault.jpg)
![DIY Smart Home Video-Doorbell with ESP32 and Raspberry Pi [ENG]](/img/tr.png)
Thanks for share your project. It's pretty close that I need. I want to create a very easy hardware to be used by my mom (80 years) to call me when she wants or needs.
I think this project can helps many older adults to be able to communicate with their families without technology being a barrier 😎
I'd probably get that notification long after someone rang.
Like 2 days later if you are a sleep and delete all notifications because you dont recognize the logo.
Yeah mine would be about 6hrs later 😂
Good video! Awesome content - When a guy like me thinks of something like this - you gotta keep in mind - someone has already got it done...I gotta step up my game!
omg it´s like magic
Very nice.
Thanks for sharing.
Greetings from New Zealand
i swear you're amazing!!!great job
Great and easy product to set up!
Great video.
Very good 👍
How about notifications on motion detection was that a thing?
Very good
Anyway to adjust the code do we can use a touchscreen with "press here" on the screen instead of physical push button?
Hey, great project.
Quick question: What is the resistance that you use for your button?
Awesome build.
Powering this would be easy via the original door bell button.
It doesnt supply the right voltage though.
You can get around that by tracing the door bell button wires back to the chime, pull the power lines off the chime and connect them to the door bell button wires.
You'll get a power line all the way to your breaker in the basement.
Pull those lines off the breaker, and connect them to an AC adapter supplying the correct voltage, then just plug it in.
Wondering if there would be a way to incorporate chime?
Another impressive project, congratulations
Great. Can we use the same project with no screen on the PI? Just camera and speaker.
Such an impressive project. Love ur vid :)
What are the chances you guys would be able to manufacture some of the boxes for sale?
Maybe serverless is suitable for the server side. A short lived workload will be run when te doorbell is pressed.
Also serverless functions can be run in a free tier when requirements are met.
However I don't know the technical aspects of this. I didn't experiment with it yet.
With this virus going on, can you make a video teaching how to make an automatic, sink, or even dish soap, dispenser?
Thanks for great tutorial. how much does it cost in total? As an idea - would be great to create Home Assistant add-on, i know many guys are looking for good smart bell solution for theirs smart houses.
Hi, I’m having issues with the speaker, it’s not working, I'm pretty sure I soldered everything correctly and ideas?
Any way to add motion detection to alert you when someone walks up to the door?
@Hacker Shack
When I am trying to execute the code it is shutting down ? What to do mate I am doing mini project on it right now
Really great video , but can i ask do i need to change in code ,from email and to email adresses or no ?
Can we operate it if we are not at home?
Nice vid Aaron! Keep hacking!
Would it be possible to do this project wtih a raspberry pi zero w? And if not, why? I am working on a project for school and it would really help out to know.
Thanks.
I have a question. Will it work without the screen and speaker?
You need a security guard outside your door, so that the door bell is safe.
No doubt, these days especially!
It is nice project
And you are grat
Honestly, Great idea. how do you deal with ppl trying to steal it... they steal the ring doorbells and those are professionally installed.
Do you have a tutorial or links for the smart lock?
I have no idea, why you not use stand clamp to solder the button? 🤣🤣 Nice project btw, I like it!
i need this for my mom's house
I see a servo being used to open the door lock, but is there code to control it?
Hello I have a question. Can we do this without a screen on it? Also for the speaker can we just use the onboard jack of the pi?
The screen should be optional, yes. Just don't connect one, I don't believe you have to change the software for that. As for the speaker, I'm afraid that is a little more involved since the audio jack doesn't have a microphone input function apparently. So the USB microphones is probably the easiest and cheapest option. More info at:
raspberrytips.com/add-microphone-raspberry-pi/
good morning. i will like know if can i to do install your sketch in one raspberry pi zero w?
I don't need of screen in bell button just a cam.
i sorry my english. I am brasilian
thanks for video
works with pi4 model b?
Sir，which option should I choose for the operating system of Raspberry Pi Imager? Rasberry Pi OS or Use custom?
can you please guide me how can I use same code using WEBCAM?
"Visit Jitsi Meet and configure the site to use your camera/microphone" contains a dead link. Do you have MQTT incorporated in your code? This would be a great addon for those you use Home Assistant, NodeRed etc for automation.
Thanks for letting me know about the dead link. I do not have MQTT, but that would be an awesome addition if you want to contribute :)
@@hackershack I would love to contribute, but I know nothing about coding, just a copy and paster.....
Congrats for the project! Can I connect the system to an existing PBX (like asterisk, 3CX) instead of Jitsi? Thank You
Simone Bonacci this would be amazing
Yes, I think it shouldn't be too difficult for him. I don't know well this language, othewise I would try to modify the code. I have to study!
@@PileofKyle do you have did it? Now i have a system that work (raspbian with linphone 3.12) , but it don't work with codec h264 and i can't install it , now i'm trying to install Ubuntu 18.04 on my Raspi 3B+ and i will try with it
@@bonaccisimone hey, let me know if you succeed 😅
@@abkl9568 the system with raspbian + linphone works but not perfectly. in the end I bought a video intercom in the end I bought a video intercom with SIP prorocol (Dahua VTO3211) that works with my SIP server (freePBX) and with Home Assistant
9:35 enabling the microphone
10:55 enabling video calls
Can you use a usb camera for video and mic input ?? Great project by the way
I think you can use a webcam
Hello, which kind of power supply did you use? Switching? Battery? I'm worried about audio noise
you got any idea ? I also have the same question
Can you make it for the pi zero
Hello, I want this it is doorbells do webcam with text message? if you available me.
Great project. Tip: if you "key" the two back pieces by a couple of layers overlapping you don't have to worry about filing or matching perfectly. They'd probably bond better that way too.
Could you use the low voltage that the exsiting door bell uses to power the device?
possibly put that power line to a stepper and maybe yeah, could probably run all of that wire in the wall as well to clean it up and to make sure that no one cuts the open lines
@@Mikey-Likes-I.T I thought that voltage is already low voltage but the USB is even lower right?
@@JFlogerzi yes, which means you would need the stepper to step the power down to the power of the USB
most home doorbells use 24V AC and rated at about 40VA so with a simple full bridge rectifier circuit that can supply 5V at 2A easy
You never seize to amaze me. So many cool projects! Wish you guys would put out more videos!
Working on it! Unfortunately it'll be difficult with the shutdown because all of my tools are in a friend's garage :/
@@hackershack don't worry people will wait for such amazing content...
Thanks a lot for your amazing video but please also say how to open the door using an smartphone?
I understand the 2 way mic. I don't want to video chat with someone at my door...😅
Now you need to add a servo with a wet wipe so when someone rings it wipes off to keep from corona lol
Or a disinfectant sprayer
Can we use raspberry pi zero
When he pressed the button on the doorbell someone was at my door 😂.
Please make more videos constantly i really appreciate your work 👍
Trying!
This is great but I found that using a Raspberry Pi 3 it wasn't up to the task (CPU utilization was at 100% and video was too choppy and slow to be useful). I found that even with a RP4 w/ 4GB RAM, a video chat on Jitsi seemed to pretty much max out the CPU utilization (although memory usage seemed pretty limited). I know from the video that you used a RP3B+. What kind of CPU utlization did you experience? It looks like from the video that the Jitsi mtg was pretty smooth.
I had similar results. It started smooth but lagged after some time. Maybe using a custom video server like the one we used for the smart security camera would improve performance. You might also be able to change resolution on the camera to improve perf.
why didnt you use the audio jack on the rasberry pi for audio istead of lcd audio
You could, but you would have to solder to the pi and change some audio settings to output to the 3mm jack instead of HDMI
I have problem when try running the script in the commnd line.
chromium-browser-v7:876): Gtk-WARNING **: 18:52:55.053: cannot open display
It would be more useful to do it locally without inet connection, less latency, faster call setup, no need for 3rd party service, no need for fast inet. I researched it awhile back using WebRTC and Pi 3 is actually better option for that because Pi 4 open source WebRTC support is still lagging.
Let's say I had 2 pi 3s and wanted to set this up. How would you go about it?
@@sonicbhoc You dont need 2 Pi's. Run WebRTC server on one Pi and open chrome kiosk mode and do it via chrome alone. Chrome supports WebRTC natively.
Wow.. free raspberry pie.. where do you live? ;)
6:33 *steady hand*
:D
What is the lag time from pressing the button to joining? People don't want to wait 5 mins.
Also how is the performance with the video calls?
How is the enclosure for environmental protection? In warm locations with little rainfall it's probably ok but for temperate climates the display and internal electronics are going to get ravaged by moisture and dust ingress. Is the display readable in sunlight? Overall nice project - thanks for sharing.
I don't receive the email do you have any tip, please help
Uses Vim to edit the files, this guy knows his shit.
I liked the project but the case is wow so big you could make it much smaller
do any of guys know the electrical diagram of this one
Would a raspberry Pi zero work instead of a 3 b+
I don’t think so unfortunately. It doesn’t have enough processing power for the video
Or a very small ipcamera with a raspberry in the home...
@@hackershack - great video appreciate the time and effort. Though why do you need to process the video, when you only need to stream it. I did this some months back on a pi zero and ingested the feed into another pi zero running motioneyeOS.
WHy need a resistor?
Connecting a LED to the PI normally requires a resistor. The pushbutton has an integrated LED, so without further investigation, I would say the resistor is just for the led in the button.
why not use an old smartphone like a Samsung Galaxy S6 or 5?
Is powered off the wall? Why isn't it storing the data locally?
128 mb memory card is enough for both os and program ?
Probably not.
it will be much cooler and safe if the email notification is also capture the image when someone ring the bell, so you can prepare to welcome the guest or pretend you aren't in home to avoid people you hate hehe 😂
Haha nice idea. You could always contribute to the codebase ;)
I have a question..... What is the usefulness of the Samsung 128gb memory card?
Yes I don't see it in the video
Pretty sure it was just the SD card he had on hand for the project demonstration. You could do this project with an 8GB SD card as you do not really need much space for anything beyond the scope of the project.
Can you make update většinou with telegram notification instead email? Please
In my os, chromium browser is not detecting the camera...can any one tell me solution for this??
Hii, are you done with the project ? I need some guidance.
Great idea! Can you use a pi-zero and can you make the call to come on skype or google duo
I don’t think the zero has enough processing power, but you could definitely use Skype or Duo
@@hackershack
When I am trying to execute the code it is shutting down ? What to do mate I am doing mini project on it right now
16:00
I love it but why no use a pi a+ ?
Didn't have one :/
@@hackershack thanks guys I was looking for something like this for long time
After I run python doorbell the screen goes blank any ideas ?
The screen turns off until a button press. You can disable that in the code by commenting out the turn on/off screen functions
Thank you awesome video btw !
It would be hard to tell who pressed the button if there was an email notification instead of the alarm.
8:14 camera setup
should I learn How to printing 3D for Raspberry pi Smart door bell?
One idea would have been to do it without the display, why should the caller see me at all? ...and water proof it. You know it's outdoor.
Really cool project. I'd have appreciated a more to the point shorter video since you provided all the details elsewhere but really nice nevertheless
Just quick question. Why you spend money to buy those parts and spend your time to make a door bell, instead of just buy a complete door bell camera product at a store right away?
Because a video doorbell with wifi-functionality costs about 1000$?
thank you .. please give me part 3d printer the project .
They’re on the hackster.io link!
You must change the URL in doorbell.py script : meet.jit.si/%s#config.prejoinPageEnabled=false
I'll buy one made from who ever can make me one
Lol I can make one as soon as the quarantine is over completely
"with a really steady hand..." PMSL are you sure about that?
6:32 "... with a really steady hand." - Shows really shaky hand. LOL
Here in Brazil, your doorbell would be robbed or destroyed.
may you could put arround the doorbellsystem bulletproof glas and only let the button outside
you should partner up with Ring and not sell your idea for free
Imagine someone stole this
Haha yeah, I talk about that during the coding part. You definitely want to make sure there's no sensitive data on your device
@@hackershackWhat about your WiFi password which is on the Pi SD-card?
0:32 Am I the only one who thought "bomb"?
Lost 20 mins for an almost unusable ideea. It uses free cloud services, which is the main NO-NO for a DIY project. The whole point of a DIY project is to be completely independent from any service of any kind. You're better off with a commercial, already-fully-made doorbell than this.
He lost me when he said the doorbel sends an email.
Instead of using annoying shit music
please buy an external mic for your recording
instead of built in mic of video recording devices
Garbage :))
This time I will do it manually with the help of woodglut designs.