How to Replace Rear Brake Kit 2011-2019 Ford Fiesta

Buy Now!
New Brake Drum Set from 1AAuto.com 1aau.to/ia/1ABD...
This video shows you how to install rear drum brakes on your 2011-2019 Ford Fiesta. Even though they are an older technology, you still find drum brakes on the rear of many modern vehicles. Like disc brakes, the brake drum and shoes will wear down over time, requiring replacement.
This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Pliers
• Anti-Seize Grease
• Chisel 1aau.to/oa/1AXA...
• Drain Pan 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@howardbatty254]

I always put masking tape on the shoes to keep oil etc of the friction material. Remove once done

[@bwright5520]

what size bolt do you use to take off hub ??????

[@nate8930]

I've actually just took the adjust tab off first, then used pliers to screw in the adjuster. But man, its impossible to get that top spring off.. you really need a hook tool, its too strong for pliers.

[@pdmustgtd1013]

Air hammer will rattle drum free. Anti-seize will not keep drum from rusting to hub. Also it will slings out and get into brakes. Only thing "anti-seize" used for on threads to help with not tearing threads up. Anti-seize will not stop corrosion and never will. Chassis grease will do far better job with keeping things from rusting.

[@jaycobvallejo2974]

Recently did my break change and this video helped a lot thanks for the help

[@IindeysWish]

You don't show what tool you use to stretch out the upper spring. That's am important part to show

[@HatinassAl]

What tool was used to pull the top spring. Struggling

[@davedeatherage4902]

What size bolt and thread size to get off the rotor please.

[@GriffinCalme]

M8-1.25 I believe, I bought a 40 mm long one from Home Depot and it worked well

[@Patriot-hz8xk]

Good job, looks somewhat complex!

[@poinsettias]

I can’t get the hub over the new shoes bro

[@curtishoffart9939]

Great video!! Clear, concise and right to the point. Made doing the brakes on my 2014 Fiesta a breeze. Thank you so much!

[@duaneulman9915]

Thank you

[@yuriykaradobri1581]

Respect

[@TRQ]

+@yuriykaradobri1581 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@bwright5520]

what size bolt do you use to take off hub ???????

[@davedeatherage4902]

I googled and found the size bolt is 8 millimeter by 1.25 hope this helps.