did i really watched a video where the speaker comes directly to the point and talks only neccesary stuff? i was just looking, but you spoke so on point that i did not realize 23 minutes were gone. very good job. thx!
Nice build! The Apex frame is awesome, I built one a few weeks ago with the Fettec ESC and it was a pain in the ass with mounting, haven't flown it yet though.
So after all this time, how's that 4in1 esc going without any added caps? Or did you end up adding one? I wouldn't care as much if it wouldn't fry my v2 flight controller too. lol
Hi, nice build. I made one exact as yours. Thanks for the vid. I have a concern though. Do I need to add a cap for this. to use these motors with a 6s battery. I saw that a lot of people burned their esc...:(
Hi man. First of all, Merry Christmas and happy new year. I've built an Apex kiss v2 with Apex OSD and Apex Regulator board. Both two wired up to the kiss v2 and to the 24A 4in1 Kiss Esc's with the original wiring harnesses. But, I have a problem on my taranis x9d. I've created a new Model. Im using Nano rx tbs crossfire., wired up correctly to the kiss FC. It was bound greateful, but when Im going to discover new sensors, RxBt and Curr and anyone else...They don't appear on the screen.
DrainmanFPV, please help me. Just built my first drone. But only motor 4 spins. I used the multi rotor 25amp castle esc's. All 4 individual esc's. Motors 1, 2, and 3 have an esc with NO BEC, motor #4 has the exact esc, except it is equipped with a BEC. Could that be the reason that only motor #4 spins and the other motors don't respond?
Thanks for the video! I was about to build the same rig and plan to run the 25A on 6S. How is it handling the 6S on your side? Any issues with the ESC on 6S so far?
Did you file out the mounting holes on the 4 in 1? I’ve heard that the Kiss mounting holes are actually 30 x 30, not 30.5 x 30.5, which somehow can cause a short, followed by a fire lol check out the Kiss FC group on Facebook for more info
Yeah Kiss is amazing. My second build was a Kiss V2/ 32A ESC Marmotte. Spent about 6 packs getting it tuned just right and haven’t had to touch it since. And she flies the exact same every time. Whereas, it seems like my Betaflight rigs all require continuous tweaking. One day they will fly amazing, then the next like garbage. Drives me nuts
@@zfpv7211 it's funny you say that! I say that all the time, you get betaflight flying perfect and then you crash and now you got to do it all over again. 🤣🤣
Nice vid guy. Very good explanation. Its my first kiss built and I really appreciate your job. Well done. I'll be here around watching your videos. Thanks bro. A silly question. How would you wire up a Tbs Evo to the apex OSD board if you're use the built in apex osd microphone instead the evo's one? Thanks in advance
@@davidsagal no no no, you'll wire smart audio wire directly to the kiss FC and the camera control goes to the camera from the Apex OSD. The rest is the same as any other unify. Like voltage video gnd etc
@@DrainManFPV ok Bro. Finally I've decided to put a unify pro v3 and now, after see your video again I have dude, excuse me, that's because Im newbie. If you wire up the white Audio wire (SmartAudio as you call it) from the Tbs to the Uart on FC to get control by the Lua scripts...how or from where, are you getting Sound trough the Apex osd board Microphone?
Nice build bro! realy like the frame. i dont get why KISS is that pricy and this much more weight/space... betaflight boards nowdays need only two boards for all that features...
did i really watched a video where the speaker comes directly to the point and talks only neccesary stuff? i was just looking, but you spoke so on point that i did not realize 23 minutes were gone. very good job. thx!
Outstanding built . I needed this thanks brother 🤘🏻💥💥💥
I just did this exact build but with no regulator and no OSD chip. I use the unify evo so its got OSD and a mic built in. Super clean
That sounds nice and easy! I'm doing my next one like that lol
Nice build! The Apex frame is awesome, I built one a few weeks ago with the Fettec ESC and it was a pain in the ass with mounting, haven't flown it yet though.
Great build! I love the alien frame! Will I love this more. Planning on future builds of the apex. One Steele analog version and one hd version!
So after all this time, how's that 4in1 esc going without any added caps? Or did you end up adding one? I wouldn't care as much if it wouldn't fry my v2 flight controller too. lol
Sick, was about to pick up a kiss v2 but can’t find em in stock in the states rn
Nice build my friend did you ever put a cap?
Did it handle well without the capacitor?
Dream drone!
Hi, nice build. I made one exact as yours. Thanks for the vid. I have a concern though. Do I need to add a cap for this. to use these motors with a 6s battery. I saw that a lot of people burned their esc...:(
Great build video.
Hi man. First of all, Merry Christmas and happy new year. I've built an Apex kiss v2 with Apex OSD and Apex Regulator board. Both two wired up to the kiss v2 and to the 24A 4in1 Kiss Esc's with the original wiring harnesses. But,
I have a problem on my taranis x9d. I've created a new Model. Im using Nano rx tbs crossfire., wired up correctly to the kiss FC. It was bound greateful, but when Im going to discover new sensors, RxBt and Curr and anyone else...They don't appear on the screen.
DrainmanFPV, please help me. Just built my first drone. But only motor 4 spins. I used the multi rotor 25amp castle esc's. All 4 individual esc's. Motors 1, 2, and 3 have an esc with NO BEC, motor #4 has the exact esc, except it is equipped with a BEC. Could that be the reason that only motor #4 spins and the other motors don't respond?
Thanks for the video! I was about to build the same rig and plan to run the 25A on 6S. How is it handling the 6S on your side? Any issues with the ESC on 6S so far?
Did you file out the mounting holes on the 4 in 1? I’ve heard that the Kiss mounting holes are actually 30 x 30, not 30.5 x 30.5, which somehow can cause a short, followed by a fire lol check out the Kiss FC group on Facebook for more info
Oh yeah, I heard that too. I do file the holes but I have never had a problem with kiss.
Yeah Kiss is amazing. My second build was a Kiss V2/ 32A ESC Marmotte. Spent about 6 packs getting it tuned just right and haven’t had to touch it since. And she flies the exact same every time. Whereas, it seems like my Betaflight rigs all require continuous tweaking. One day they will fly amazing, then the next like garbage. Drives me nuts
@@zfpv7211 it's funny you say that! I say that all the time, you get betaflight flying perfect and then you crash and now you got to do it all over again. 🤣🤣
Just finished this build. Motor #1 won't spin. Please help💔
Nice vid guy. Very good explanation. Its my first kiss built and I really appreciate your job. Well done. I'll be here around watching your videos. Thanks bro.
A silly question. How would you wire up a Tbs Evo to the apex OSD board if you're use the built in apex osd microphone instead the evo's one?
Thanks in advance
You're welcome, I'm glad you enjoyed it, the Evo solders the same way, nothing is different from any other unify.
@@DrainManFPV So, the SmartAudio/CRSF RX should be wired up to the VTX Control on the Apex osd and the CRSF TX to the Audio Out on the Aoex osd?
@@davidsagal no no no, you'll wire smart audio wire directly to the kiss FC and the camera control goes to the camera from the Apex OSD. The rest is the same as any other unify. Like voltage video gnd etc
@@DrainManFPV ok Bro. Finally I've decided to put a unify pro v3 and now, after see your video again I have dude, excuse me, that's because Im newbie. If you wire up the white Audio wire (SmartAudio as you call it) from the Tbs to the Uart on FC to get control by the Lua scripts...how or from where, are you getting Sound trough the Apex osd board Microphone?
@@davidsagal It's okay, i don't mind to help, what's going on? You ended with "if you wire up the white audio wire"
I like what your doing bro.. Keep at it
I really appreciate that window washer 💪
The clamp that you use while soldering the crsf nano... i guess its printable can you get me the thingi?
NVM I found it :D www.thingiverse.com/thing:2064269
Why can't you order the wiring harness? I ordered a few of them
They are available now, back when I did this build they were not available yet. (Seperatley)
Nice build bro!
realy like the frame. i dont get why KISS is that pricy and this much more weight/space... betaflight boards nowdays need only two boards for all that features...
Lol yea I don't know why either. Like 7 boards
@@DrainManFPV "...Keep It Super Simple..." LOL
@@qygpygpq707 🤣🤣
But... the bf will never fly like kiss.
Weight?
All up weight, with GoPro and 6s 1300 Pack is 706g
I hate it when there's not much room around battery connection!
First!!☝️