hello, great tutorial, I have a question about the vtx part, how come both the maximum and minimum power are set? which power of the 2 will come out of my vtx? thanks
I just built.my kiss apex, rockin kiss v2 kiss 32a 32bit esc, wolf v3, stout v3, ethix micro cam. With kiss, when u arm, do the motors spool up slower than bf?
loving the presentation and the information is amazing.... I have allot of questions about kiss I have been designing a cinematic drone but built with fpv features. Is there any relation between kiss and dji ?
I came here cuz I fit the description he makes in the first few seconds. Then, at 1:30 I’m screwed. My comm port doesn’t “come live”. No drivers on my macOS to detect the FC, I’m assuming. I have to assume because the info I’m looking for isn’t here. What do I do when my comm port doesn’t see my FC? Help.
@@uavtech thx broski. I was wrong about the driver. I downloaded the GUI from flyduino.net and it wasn’t connecting. When I downloaded the GUI from KISS.FLYDUINO.NET it worked. Different links to different versions, I guess. Now I have a new problem. I’m connected but rx doesn’t appear to be communicating with fc. On the data tab none of the GUI bars are moving to match stick inputs. My crossfire TX sees the kiss FC, but I got no response in the data tab. Wiggling throttle n the 1000-2000uS bar indicator doesn’t move.
Whats up bro I juat started using kiss how can I fix my throttle and yaw and roll and pitch position when I move the stick there all in different places
Ok I am coming from Beta flight to kissim bound to my 4xr receiver I can make lights blink and one switch is a beeeep Maby to help recover quad but I can’t connect and my f. Has firmware that is old the configurator says firmware is to old for this version to handle . I’ve not had any luck flashing new firmware . I have downloaded I think all previous configurator & they all say firmware is to old . I followed you other video on flashing is there a more step by step instruction for making the configurator hook up with the FC . I’m running v1 FC with 24amp esc’s . Really I would be happy with just being able to arm , fly and figure out later . Any suggestions . My esc’s have the blue light .
My kiss v2 25A 4 in 1 build everything works including the camera, vtx, osd, and receiver but none of the motors spin. I also dont get any beeps when I plug in the battery but I do get lights from everything and I connected to the kiss gui and flashed to the newest esc and fc firmware. Any suggestions or answers please help.
Got my kiss v2 setup not cheap but worth it. I bought a used v1 which was great but just wanted the latest and greatest. Kiss my quad series eliminates the learning curve. Really kiss should hook you up not much info on kiss none as detailed as yours. Appreciate the work
Thanks for the video 👍👍 it's very helpful I am having one problem I am using kiss fc v1 Radiomaster tx16s with crossfire txv2 Nano rx How to re map the channel order as my throttle in kiss data output is on pitch And pitch on roll stick How to remap the input to the correct sticks. Please help I have tried to change the channel order in the radio from. AETR TO TAER. but problem is exist
you will have to go into your radio and change the channel mix. if your using Open TX should be under Mix or Mixes, scroll to Channel One , press and hold enter, select edit, then scroll to where it says source, press enter, then change it to Throttle. Do the same thing for the rest, Channel 2 will be Roll, Channel 3 is Pitch, and 4 is yaw. Then confirm in Kiss config that those channels are moving correctly under the data output tab. If you have multiple quads, i would recommend setting up a new model in your radio so this change will not affect your other quads. hope this helps
Hey Drainman, I'm stumped- been building flying betaflight quads since 2017 and had mostly success- so I wanted to try KISS. Got an APEX KissV2 4in1ESC built with crossfire and keep getting dead ducks oh hard punchouts- everything goes dead for 1-2 seconds. changd to frsky to see if it's in my radio but same... rebuild my alien with Kiss V2 and 25A individual ESCs and same thing!!! Tried a bunch of things but nothing seems to work... almost feel like giving up on KISS - HELP!!
Got it figured- weirdly the Taranis default channel output on 1 which is my Throttle channel was set to around 1000 and the min throttle setting in Kiss was at 1060 or so which created a dead "no control" zone at zero throttle. So hard punchouts followed by a momentary zero throttle position or idle caused all AER to be disabled. I adjusted the power output on Ch 1 and set min command to 1000 so I now have no "Dead Ducks".
What if we all moved away from "fpv" and went to "frd" (freestyle and race drone) I feel like we all adopted fpv as our own but it’s technically not and we are very technical lol
I built a drone using the kiss cc aio FC. I connected and using theGUI 1.13 and FW 1.1rc6, need to remap the motors and also setup arming and flight modes. The GUI doesn't seem to allow me to that. Need help
Thanks for doing this series. New to KISS so your vids have been super helpful.
hello, great tutorial, I have a question about the vtx part, how come both the maximum and minimum power are set? which power of the 2 will come out of my vtx? thanks
Do you have a video showing how to setup CRSF LQ on the Wolf PDB by any chance? Thanks 👊🏻
Is there an air mode for Fettec? (Kiss gui)
I just built.my kiss apex, rockin kiss v2 kiss 32a 32bit esc, wolf v3, stout v3, ethix micro cam. With kiss, when u arm, do the motors spool up slower than bf?
loving the presentation and the information is amazing.... I have allot of questions about kiss I have been designing a cinematic drone but built with fpv features.
Is there any relation between kiss and dji ?
Got an old quad of ebay a few yrs ago,it flyduino on the board V-1 i think, after usb to pc it lights up but no com port opens?? any ideas.
I came here cuz I fit the description he makes in the first few seconds. Then, at 1:30 I’m screwed. My comm port doesn’t “come live”. No drivers on my macOS to detect the FC, I’m assuming. I have to assume because the info I’m looking for isn’t here. What do I do when my comm port doesn’t see my FC? Help.
Install the CP210 driver. I'll drop the link below, but wanted to do two comments as YT might block my link. If so, just Google "CP210 driver"
@@uavtech thx broski. I was wrong about the driver. I downloaded the GUI from flyduino.net and it wasn’t connecting. When I downloaded the GUI from KISS.FLYDUINO.NET it worked. Different links to different versions, I guess. Now I have a new problem. I’m connected but rx doesn’t appear to be communicating with fc. On the data tab none of the GUI bars are moving to match stick inputs. My crossfire TX sees the kiss FC, but I got no response in the data tab. Wiggling throttle n the 1000-2000uS bar indicator doesn’t move.
Whats up bro I juat started using kiss how can I fix my throttle and yaw and roll and pitch position when I move the stick there all in different places
Hey buddy whats the way to adjust my current? My osd said it took out 785mah but charger put in 1080mah. What's best way to adjust that?
Which PDB are you using.
Ok I am coming from Beta flight to kissim bound to my 4xr receiver I can make lights blink and one switch is a beeeep Maby to help recover quad but I can’t connect and my f. Has firmware that is old the configurator says firmware is to old for this version to handle . I’ve not had any luck flashing new firmware . I have downloaded I think all previous configurator & they all say firmware is to old . I followed you other video on flashing is there a more step by step instruction for making the configurator hook up with the FC . I’m running v1 FC with 24amp esc’s . Really I would be happy with just being able to arm , fly and figure out later . Any suggestions . My esc’s have the blue light .
Also my osd and camera are working .
My kiss v2 25A 4 in 1 build everything works including the camera, vtx, osd, and receiver but none of the motors spin. I also dont get any beeps when I plug in the battery but I do get lights from everything and I connected to the kiss gui and flashed to the newest esc and fc firmware. Any suggestions or answers please help.
So your motors are either not getting power or not getting signal. Double check all of your wiring.
Got my kiss v2 setup not cheap but worth it. I bought a used v1 which was great but just wanted the latest and greatest. Kiss my quad series eliminates the learning curve. Really kiss should hook you up not much info on kiss none as detailed as yours. Appreciate the work
Can you pls send me a link how to fix my positions of my stick they are in different positions idk how to fix that on kiss gui
how do you fix the quad from moving under rates in the chart?
thanks man for the video 🙏🏼👊🏼✌🏼
Thanks for the video 👍👍 it's very helpful
I am having one problem
I am using kiss fc v1
Radiomaster tx16s with crossfire txv2
Nano rx
How to re map the channel order as my throttle in kiss data output is on pitch
And pitch on roll stick
How to remap the input to the correct sticks.
Please help
I have tried to change the channel order in the radio from. AETR TO TAER. but problem is exist
you will have to go into your radio and change the channel mix. if your using Open TX should be under Mix or Mixes, scroll to Channel One , press and hold enter, select edit, then scroll to where it says source, press enter, then change it to Throttle. Do the same thing for the rest, Channel 2 will be Roll, Channel 3 is Pitch, and 4 is yaw. Then confirm in Kiss config that those channels are moving correctly under the data output tab. If you have multiple quads, i would recommend setting up a new model in your radio so this change will not affect your other quads. hope this helps
@@EthanMitchell_TH-cam thank brother it was really helpful 👍
Hey Drainman, I'm stumped- been building flying betaflight quads since 2017 and had mostly success- so I wanted to try KISS. Got an APEX KissV2 4in1ESC built with crossfire and keep getting dead ducks oh hard punchouts- everything goes dead for 1-2 seconds. changd to frsky to see if it's in my radio but same... rebuild my alien with Kiss V2 and 25A individual ESCs and same thing!!! Tried a bunch of things but nothing seems to work... almost feel like giving up on KISS - HELP!!
Got it figured- weirdly the Taranis default channel output on 1 which is my Throttle channel was set to around 1000 and the min throttle setting in Kiss was at 1060 or so which created a dead "no control" zone at zero throttle. So hard punchouts followed by a momentary zero throttle position or idle caused all AER to be disabled. I adjusted the power output on Ch 1 and set min command to 1000 so I now have no "Dead Ducks".
@drainman_fpv it hovers it flies but when I flip it cuts out.. what’s happening?
Cannot flash Fc{no response from bootloader} button seems damaged any ideas?
hold down booloader button and then plug in USB while holding down.
BlackBox? Can you cover this?
You left stuff Out You said You Would return Too. Like Changing The Motor positions.
where['s the video to fix this problem at 17:29
you can't. You need to resolve in your radio.
What if we all moved away from "fpv" and went to "frd" (freestyle and race drone) I feel like we all adopted fpv as our own but it’s technically not and we are very technical lol
Nice vid. Good explaining. Short too long point
come on ... "that was the right switch" .... how to setup THAT sound .... btw cool vid
Here is the playlist for that.
th-cam.com/play/PLE-EjNqyKwcgHSszEqAgMqrZD1JuBOUez.html
I built a drone using the kiss cc aio FC. I connected and using theGUI 1.13 and FW 1.1rc6, need to remap the motors and also setup arming and flight modes.
The GUI doesn't seem to allow me to that. Need help
you are correct. No motor remapping avaialbe. Also limited flight modes, they are on the first page. That's all you got.