Don't hammer on the inner race of the bearing, unless it is a press fit on the shaft and then only with support. Front bearing install, use a driver that contacts the outer race only!
Is there a reason you repacked the bearing instead of replacing it? I think that is likely my issue I have. I'm getting a chirp and I'm pretty sure it's the small bearing, but won't know until I take it apart. Thanks for any insight you might provide.
The way the charging system works on this vehicle, is the battery is at 12 volts, the alternator, brings up the voltage from anywhere from 13.5 to 14.5 in order to charge the battery while the car is running and and to supply adequate charge all the electrical components in the vehicle.
Don't hammer on the inner race of the bearing, unless it is a press fit on the shaft and then only with support. Front bearing install, use a driver that contacts the outer race only!
Nice bro 😊
Good job can you show me the wiring charge(wiring) you made on you garage with light and batery tester thankyou
Good bro 😊
carnal. es muy bien tus videos, haz mas de otros alternadores y arranques. animo
Good working bro 😊
Caramba mano, porque não usou o rolamento velho para bater em cima do NOVO????
Is there a reason you repacked the bearing instead of replacing it? I think that is likely my issue I have. I'm getting a chirp and I'm pretty sure it's the small bearing, but won't know until I take it apart. Thanks for any insight you might provide.
Probably because theyre usually fine as long as they have grease and weren't already messed up. Not sure tho I'm just giving my opinion
@@Auto209If you repack it and it spins smooth, then you're good. But if you pack it and its not smooth, Throw it out.
Does it matter what kind of solder you use. I see it looks thicker than solder i use. Can anyone answer my question
why is it giving out 14 v instead of 12v please
The way the charging system works on this vehicle, is the battery is at 12 volts, the alternator, brings up the voltage from anywhere from 13.5 to 14.5 in order to charge the battery while the car is running and and to supply adequate charge all the electrical components in the vehicle.
Wow.
Nice 😊
Crude at best.