Great video my man. I have a 85 elcamino pushing 600 hp so I'm picking up what your laying down. Anyone looking to run 400 hp or more better listen up. One small note however, the rear will flex and twist but not as bad as you showed. But that is only because the rear bumper bolts directly to each rail so your rear brace is not needed. As long as your using a steel bumper and not a fiberglass roll pan that is. But the rest was spot on. Keep keeping it real
Alright dude, I did the boxing in and added a brace behind the shock towers after watching this video! Makes a fucking crazy difference! Great video man thx
I can say that those G body frames were meant to be light and have flex they were ment to be for fuel economy plus most G bodies were underpowered except the grand national but its always great to box those frames especially if ur adding an aggressive drive train to love ur G body vids 👍
Oh wow that really wobbles ..... I have owned my 1985 Buick Regal now for 16 years and it would be a project to do something like this to my car, but well worth it . Dope video my boy 🙏🏼
you can do the same thing with a 83 to 2003 2wd s10 frame standard ( cab ) by chopping off the rear of the s10 frame and welding the rear frame of a gbody to it.. I did this when front frame wasn't available for a 2+ 2 grand prix in the 90s..
that was a good video fam! dam good! cj gave me the front brace off his monte carlo mine didn't have it i'ma put a bar across it is think to triangulate it is still plan on putting in that rear shock tower brace. as it is that frame stiffened up alot! good video man!
Nice work sir. Like seeing levels involved. These frames are very flimsy without the body. Eurathane body mounts help a lot to. Be prepared for more rear-end suspension travel. There's not much clearance back there lol.
Nice, video wasn't helpful as a how to video (that's not what brought me here), however it is impressive how much stiffer that frame is after not that much work. Was literally just looking at "Schwartz Performance" frame. Not going to to say it's not a nice frame because of course it is, but 11G's for a bare custom frame. Just shows with a little steel, some ingenuity, and a welder you can make something almost as good for just a few hundred bucks and some sweat and muscle. As cool as G bodies are, until they hit that super expensive collector car bullshit in another like 20 years (or hopefully never), I can't see spending 11G's for a bare frame. You could buy a solid roller car, do a complete LSx/4L80e swap, nice interior, wheels, and paint for for 11k let alone just a frame.
Get in there, i love your videos, but stiffening the frame does not always help, if your planing to race in the street you want a sloppier chassy and not so stiff so you can put the power to the ground.
First off I like to say "I love your videos bro" I would like to do a gbody frame resto as well to my Cutlass Salon. Is it anyway I can contact you via phone number or email with insight, instructions, and questions?
You don't have to, but it would be much easier, even on a lift. If you're doing it just on jack stands make sure you have the frame perfectly level side to side because if it's on a hill or bump and you weld in the braces with the frame twisted from being on a hill it'll stay twisted like that when you weld in the braces, basically ruining your frame unless you cut out all your welds and start over. Also if you do it on a complete car be very careful not to cut or burn the brake or fuel lines while fabricating and welding, and disconnect your battery from the car.
I don’t know about y’all...But I love seeing the G-Body shuffle
Damn homie one good hop that shit is done
notice the placement of the blocks..... put them blocks back in the same place as you had inthe beginning its still spaghetti....
Great video my man. I have a 85 elcamino pushing 600 hp so I'm picking up what your laying down. Anyone looking to run 400 hp or more better listen up. One small note however, the rear will flex and twist but not as bad as you showed. But that is only because the rear bumper bolts directly to each rail so your rear brace is not needed. As long as your using a steel bumper and not a fiberglass roll pan that is. But the rest was spot on. Keep keeping it real
Thanks fam sorry im .just seeing this comment 🤦🏾♂️🤦🏾♂️
damn frame shaking like a stripper 😂😂😂😂
Solid video big homie, showing the stages and side by side helped with the decision. This just facts and not guessing.
Thanks alot fam 💯
Alright dude, I did the boxing in and added a brace behind the shock towers after watching this video! Makes a fucking crazy difference! Great video man thx
Glad this vid helped you out fam
I can say that those G body frames were meant to be light and have flex they were ment to be for fuel economy plus most G bodies were underpowered except the grand national but its always great to box those frames especially if ur adding an aggressive drive train to love ur G body vids 👍
Oh wow that really wobbles .....
I have owned my 1985 Buick Regal now for 16 years and it would be a project to do something like this to my car, but well worth it .
Dope video my boy 🙏🏼
That was a great video! Awesome stuff. It is so good to see the before and after on these kinds of things.
you can do the same thing with a 83 to 2003 2wd s10 frame standard ( cab ) by chopping off the rear of the s10 frame and welding the rear frame of a gbody to it.. I did this when front frame wasn't available for a 2+ 2 grand prix in the 90s..
You should have kept the cinder blocks in the same place on the stiffened frame to see the true difference
that was a good video fam! dam good! cj gave me the front brace off his monte carlo mine didn't have it i'ma put a bar across it is think to triangulate it is still plan on putting in that rear shock tower brace. as it is that frame stiffened up alot! good video man!
Big Deezy thanks bro 👍👍
Dope vid Sam
yes I did sir always watch my homies shit
Great video brotha. Got any videos on replacing body mount on the Gbody body
Yess check the channel out
Nice work sir. Like seeing levels involved. These frames are very flimsy without the body. Eurathane body mounts help a lot to. Be prepared for more rear-end suspension travel. There's not much clearance back there lol.
So you saying if I stiffened it up then she will squat at the line?
good video buddy I like it I got am 85 el camino!!
Good looking out on the frame mods for these
Np hit the subcribe button
See you notched that frame too.
Mackaveborn yes sir
Nice I see the diff, with the more horse power you need to box.
What years was this used, I have a 96 impala, and bent the frame by using a floor Jack under the door...
This was a gbody frame
G bodys are from the 80s js
Nice work homie much help by any chance do you have the part number to the transmission tunnel brace
Any tips on trans tunnel bar placement? Thanks in advance!👊🏿
Nice very very nice how much you charge for this
Thanks fam 1k-1500
bad ass super helpful
Awesome video man, where did you buy that trans tunnel brace from?
Thanks ..got it from jegs
Rear driveshaft loop is is supposed to go down or up I see people put it differently???
Nice, video wasn't helpful as a how to video (that's not what brought me here), however it is impressive how much stiffer that frame is after not that much work. Was literally just looking at "Schwartz Performance" frame. Not going to to say it's not a nice frame because of course it is, but 11G's for a bare custom frame. Just shows with a little steel, some ingenuity, and a welder you can make something almost as good for just a few hundred bucks and some sweat and muscle. As cool as G bodies are, until they hit that super expensive collector car bullshit in another like 20 years (or hopefully never), I can't see spending 11G's for a bare frame. You could buy a solid roller car, do a complete LSx/4L80e swap, nice interior, wheels, and paint for for 11k let alone just a frame.
👍nice frame work BIGG FELLA
TwinSOLid438 u didnt watch the hole thing tho lol
Get in there, i love your videos, but stiffening the frame does not always help, if your planing to race in the street you want a sloppier chassy and not so stiff so you can put the power to the ground.
nrock 🤔🤔🤔🤔🤔
Yeah but if you frame brakes the you a really fucked
First off I like to say "I love your videos bro" I would like to do a gbody frame resto as well to my Cutlass Salon. Is it anyway I can contact you via phone number or email with insight, instructions, and questions?
I'm talkin bout the trans braces or loop I'm not sure what's it called
Do I have to remove the body from the frame to box the frame?
Yesss
😑 I never knew this. Do you have to take the body off to do this?
You don't have to, but it would be much easier, even on a lift. If you're doing it just on jack stands make sure you have the frame perfectly level side to side because if it's on a hill or bump and you weld in the braces with the frame twisted from being on a hill it'll stay twisted like that when you weld in the braces, basically ruining your frame unless you cut out all your welds and start over. Also if you do it on a complete car be very careful not to cut or burn the brake or fuel lines while fabricating and welding, and disconnect your battery from the car.
got that 66tbird uni body.can you tell me how to strengthen my uni body
what's you email big homie?
I'm Loyal getinthere.boys@gmail
Let me know all what you did send me a contact
Mr RMB I show it some other vids just look for frame update
What was the brace called again
Ferrari Boy314 shock tower brace ..i think u talking abt
Rear driveshaft loop is is supposed to go down or up I see people put it differently???