ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Checking out the Mazz Designs Cheat Code chassis for the scx24. This thing is clean!
Cheat code chassis available here (normally released on Friday evenings)
mazz-designs.c...
Scx24 stand here
amzn.to/3Nz149P
Bbs uses in my mud pit found here
amzn.to/3nyxoiw
Parts used on this build found here
2s Lipo used here
amzn.to/3RhcaUe
Screw kit for chassis build here
amzn.to/3nB9gM9
Furitek Lizard Pro esc
bit.ly/39jhrtc
Furitek micro Komodo motor here
bit.ly/3MIMEU3
Agfrc servo found here
amzn.to/3xJbb7r
Ccxrc parts found here
www.ccxrc.com/
MofoRC parts found here
www.moforc.com/
Injora internal spring shocks found here
amzn.to/3ujf28X
Rear shocks not available at this time
Wheels found here
amzn.to/3R3Awkc
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
Matt,
Thanks for the support. Super glad you are enjoying the chassis and beadlock rings. Super well put together video and digging that new course a lot. Cant wait to see it finished. I really appreciate the kind word. Means the world to me.
Thanks once again for trusting and featuring my products.
Joey Mazz
Absolutely man! Well deserved. Thanks for all you’re doing for the scx24!
@@2fmrc 🙏
Would i be able to run a c10 body on this
@@therealteja yeah. Should work just fine with a little work. I’ve seen pretty much every body mounted up to them.
@@2fmrcHey Brother Where can I get a Body like this one? The dark grey one on the Mazz Design Chassis
Hello from southeast alaska I'm putting together a scx24 aluminum chassis tonight.i got Emax servo and aluminum mount. Next doing 66t motor into the trans.
I freaking love my Cheat Code! Bella Bronco is amazing!!! I do love the cliffhanger! Great job on the paint. Hope to be shooting a video comparing mine with my buddy’s cliffhanger Cheat Code on portals later today. Great video, Matt!
Heck yeah man! I may do a vid on this one Vs my Killr chassis with portals. See how it goes lol
@@2fmrc you still should do this video
FMX24 has raised some serious interest . Back to the drawing board Axial .
Yep! I totally agree!
Cheat code is really sweet.
Thanks uncle lee
The noise is probably from you overdriving the hell out of it. I'm guessing the motor does make a bit of difference but if you take the overdrive out of the front it will be quieter.
Love your content. Please keep it up. It's greatly appreciated.
Yeah that definitely makes a difference. That’s part of the reason I was just running with it after checking the trans but it still seemed way too loud even for the overdrive lol. That motor is insanely loud in person.
Ok, definitely gonna start collecting parts for one of these. Hopefully he gets some more units ready to ship soon.
I really appreciate the interest 🙏
Can’t wait to see the finished course!
Mattt, a good friend of mine once told me. Stick with one vehicle and get really good at it. We're not friends any more lol. JK. Keep on Keepin on brother!
Haha! Can’t be running with negative people like that!
Have you tried filing down a stock screw. The angle let’s it get deeper into the hole to cut threads. You might have bore the hole out a little bit. Using a 1.2mm drill bit.
Good tip, thanks
Man that’s a sweet truck. Nice build Matt!
I love the Mazz chassis! great build and video.
🙏
Shout out to MAZZ Designs!
Thanks texoma
Yeah the micro fpv quad packs are the way to go
I heard about them but first I seen. They look amazing!
Then hook up esc. RADIOLINK recevier transmitter and power hobby pro lipo 450mah 7.4 battery my first time doing electrics
You got it!!! Let us know how it goes!
I know you said you love this frame, and it's probably between this one and your Hard Park crawlers frame, but other than the bling I'm not seeing it. Yeah, this one is nice and it has some flexibility as far as mounting your links, but the battery still mounts in the back (unless you mount it on the rock sliders). All of the hard park crawlers frame also mount the battery in the back. With these tiny little trucks, weight distribution is everything. The heaviest/highest mounted weight is the battery. In my opinion, being able to mount the battery up front is key. I've been looking hard for a frame that will allow you to mount the battery up front AND has some flexibility as far as mounting the upper links. Looks like the Furitek Grasshopper does both. Have you looked at that one? If I'm way off base on this, please correct me. You do A TON more crawling than I do.
As for the chassis... Man, oh man. I already wanted one. Now... I REALLY want one. I just did my first lcg chassis build with a Mofo 333. Everything went together so great, I'm ready for another one. Now... big question is, can we get one for the Gladiator?
Awesome build Matt! Thanks for the build breakdown!
Great video my friend 😊👍
matt, what bolts/screws did you use? cant find the link in the description
Sorry about that. Here they are!
amzn.to/3nB9gM9
I actually have hardware kits that will be in stock july 8th on site if you are still in need
0:05 I was just thinking about using beads as fake mud!!
Yeah I thought about tossing something else like that in for some different size stuff to mix in! The bbs from amazon work great though lol
Is it even a scx anymore at this point
Well idk? All Scx24 parts, just upgrade parts lol
In my most reverent tone: "It's still an SCX in spirit."
I thought my nano beast 2.0 was already loud enough. Cant imagine the micro komodo is even louder
What do you think of the new injora hi clearance link set that is stainless steel will a plastic screw on ball joint and the brass or aluminum balls pushes thru one side, really liking all the fcx24 vids too !!
I really like them. They seem really smooth at the pivot point. I haven’t installed mine yet but have a set I put together and checked out a bit.
@@2fmrc what do you do with the foams that come in the rc4wd scramblers, trim, v notch, throw them out ? Seems still I don’t have the full send wheel weights yet either, still waiting on them to arrive for the stamped steels
Man kick ass Matt!! I've been trying to get one of them chassis but haven't been able. Don't remember when I last msg the gentleman on the site. The my job won't allow me to. (We keep America going at all hours) Hopefully one day I'll be able to. Keep up the vids Mr. awesome reviews too. Rock on 🤘🏻🤘🏻
I know that feeling. I work every single holiday usually just because our job never stops either. Covid couldn’t even slow us down 😆
Jose hit me up on Instagram 🤘
Matt,
In the screw kit, did you use the nuts in the kit to install the 4-links? I ordered a screw kit and the nuts don't match up with any of the screws.
Yes I used the nuts that came with it. It looks like they come with lock nuts now. Mine came with just regular ones. I would’ve preferred lock nuts. The nuts don’t fit the screws? Are they just wheel nuts that are included?
That piece on the top flap is a bottle opener I think 🤔
Never really paid much attention to that! I just use my teeth anyway 😆
Definitely a bottle opener save those teeth matt lol
Those are the older Treal oil filled shocks right? I got the Mofo oil shocks and really like the dampening but want more travel... and less leaking lmao.
Do you know why they stopped making them? or if they'll ever come back? I really want a set
The last time I asked I was told they were looking for softer springs to put with them. Which don’t make much sense but that’s what they said. I am running some vlp springs from the old double barrels on mine. These are the only oil filled shocks I’ve ran that are actually smooth and don’t leak like crazy lol
Okay I get it takes some work to do but 2 flat pieces of metal and 5 printed bits for 100$ 🥶 think I’m good
I’ll check the cvds tho
Great build! Do you think a C10 body with no bed would work on this lcg?
Thanks! I would think so. It may not line up with the sliders like the cliffhanger but it would probably fit pretty well on the chassis.
Airsoft bb mud pit is great idea
My first gen kamodo is crazy loud moving forward, but quiet and smoother and reverse. I can’t figure it out
Yeah they are just some really loud motors
How much you want for that bad boy?
LOL Probably a little more than your gonna have.
@@SINNER_01 lol. Highly unlikely. But probably more than I'd want to spend.
@@SINNER_01lol who dont have 700$?
@@wazewaze8185 I that was pretty funny myself...
What size are the injora internnal shocks. 32mm or 40mm?
I definitely need to get my hands on a Cheat Code. All I hear is nothing but good things about the awesome chassis. Got a question for you Matt. What causes the cogging on the motors? I have the same problem with my micro komodo. But, when I switch to the nano beast, there is no cogging. What's going on?
I didn’t have any issue with that one until it just died on me. Now it just won’t run correctly. I really don’t know. Figure something internal went bad or a short in the wires. Haven’t been able to find anything for sure causing it though.
🤘
What small lipo battery pack are you using ?
Sorry. Thought I linked it. It’s this one
amzn.to/3RhcaUe
do you know of any similar chassis to the cheat code that won't break the bank?
I really like the Hard Park Goblin also. You can get the regular or xl for extended setups. It’s a great chassis that comes with the sliders etc. You can also get the Injora lcg chassis for super cheap and it’s a great chassis. It don’t have the sliders but works really well.
amzn.to/3pSzpas
What’s the name / link to the battery?
Sorry. Missed it lol. Here it is. They aren’t the smallest I’ve ran but they have great punch and have a better footprint than stocks
amzn.to/3ujQnBr
@@2fmrc yeah, I might use it for a mini z build. Lol
@@TheShopMiniRC heck yeah! Should be good for it. I also really like the orlandoo batteries. They are tiny!
Is there a single acc 24 part even I there anymore?
Where are you get them magnetic mount I need a few sets of them any info I appreciate
These came with the chassis
if you use the 4mm wide cvd what you put on the rear axle ?
A set of hot racing +4mm shafts. Forgot to mention those lol
Looked like a bottle opener stuck to the lid of the box as well
Yep! Sure is!
@@2fmrc nice touch
Bummer - the Dlux Fab shafts are no longer available.
That decal in the lid of the box looks like a bottle opener
Yep it is!
Have you compared this chassis to the uglyAF chassis?
You like quiet motors I only run louder electric motors lol
Why louder?
The biggest problem with electric motors, you can't tell one from another.Now I can.
broke a drive shaft today
That’s no good! I break them a decent amount myself lol
Looks like a bottle opener in the top of that box
Yep!
😍😍😍
Matt where did you get the link riser?
I printed it. There is a free file on thingiverse if you have a 3D printer
@@2fmrc yea no luck there. Finding quality ones has been a struggle
@@gom4ngo745 yeah my printed ones sometimes strip out after awhile. I wish someone would make a good quality plastic one or aluminum one.
Jec racing makes plastic and brass ones!
@@2fmrc Small block of aluminum, saw, files, drill.......good to go! Be not held back buy digital hand cuffs.
Hey man have you tried the evo 24 chassis?
No I haven’t. Looks very similar though!
@@2fmrc I’ve heard some good stuff about it it’s got a pretty angled skid and can come with a delrin one which is next level
What are the beads on your track?
That’s my mud pit! Lol I used a bunch of these for it
amzn.to/3IcKEmk
Thanks Matt great idea.
It's almost as we have too many options lol
Yes. There are soooo many chassis now that they are almost repeating each other. This one is pretty unique and cool but there are others very similar.
Yes. There are soooo many chassis now that they are almost repeating each other. This one is pretty unique and cool but there are others very similar.
BWAHAHAHAHA!!!!!!! So, how's that FMS compensation going for you and where do I sign up? I want my lifetime payment of one truck. LMAOOOO Man... some people.
Haha! Exactly! I’m like I basically built this channel off the scx24 and you think I’m gonna start pushing a brand because they give me 1 truck?!!! I wouldn’t have even mentioned the freebie if I was trying to do that lol. I just actually love that truck so far.
@@2fmrc I'm inove with that truck, too. And haven't been able to order it yet. When I saw the Louisiana license plate stickers, I was sold. I live in South Carolina but, was born and raised in Louisiana... 42 years. I'm definitely what you'd call one of them bona-fide Cajuns. Top it off, that truck reminds me of something you might see someone rolling up to the little boucherie in some backwater community of, say, Gueydan or Whiskey Bay. LOL
Is the nano a straight fit onto the Komodo mount?
Onto the micro komodo mount. Yes
Thanks Matt for taking the time to reply.
@@TheVonJagger anytime!