Thanks Taswer, I do not have access to TS02, but imagine that is very similar to TS06. I will try to get one of new generation models like TS03, TS07 and show in my channel.
I really enjoyed d video, it has really helped me to remember sum of d tins I used to kno wen I had access to TS 06 Plus..pls, wen are u going to release a new video..??
Happy you like it Nikolay! You will learn here more then there, but still the 'paper' will be useful ;) BTW there will be soon the best course ever available :) Good luck and all the best, see you on site!!
Thanks Greg, yes the paper is all what I need as I have been working on site for many years (started as labourer then carpenter then completed HNC and started working as site manager and just few weeks ago completed my BEng degree in Civil Engineering and now want to be a setting out engineer. As always, please keep up with more good videos.
Using this interface for the video is an great idea !!! It will be much helpful when you will use it for all your videos : is easier for us to listen your comments and watch what commands you use on controller...
Thank you very much for these videos. I am really learning so much. Prior to this settings, do you already have your fixed points (RT1, RT2, RT3) known? If yes, how does one achieve such? Thank you again.
Hi Ovie! The control points will always be given to you. I will show control points drawing in the drawings section. Sometimes you will have only position of grid pins (primary control) around the site and then you will have to survey/co-ordinate your new retros to be able to set out the site.
I mean from EDM or inside programme there is local survey witout reference point...so i would b very thankful if u could give me some new idea fr the layout of new bridge
Greg do you keep all your station points under one job and your setting out points on a different job? Then change jobs after you do you take your backsight?
Yes, I keep control job separate and don't mix it with any other points also doing resections in separate job not to keep all the data in my control job
Hi faramosh! When you look at the EDM you can find the centre of it seeing the lights. There is a different colour when you are on the left and different when on the right facing the instrument and thus you can find where the instrument is facing exactly (e.g. when you do a stakeout).
Hi Greg. Thanks for your tutorial videos. I saw someone has already asked for the virtual versions of the TS16 for practicing purpose. I almost have the same question. As far as I understand, there are/were/have been several software from Leica with different names which simulate different model of instruments. Like you mentioned in this video, the one is used here is Leica flexine. So my questions are: are these software open source or paid? What's the name of the latest ones which simulate the robotic instruments, ideally TS16 and 15? And how can I access them. Thanks
I downloaded them from SCCS page, but can't find it there anymore. It was for free. Separate simulators for flexline, viva and captivate series. If you find it please let the community know
Thank you for the brilliant resourceful videos. I have one question , is it possible to correct the data if the reflector level was mistakenly set to 20m instead of 2 m?
Hi! Yes there is, but I can't find it anymore on the page I got it from, will check other page sent by one of our friends and if it's ok I will leave the link 😁
@@SITENG Thank you, really appreciate your help. Im working my way through all your videos and making notes as I go so this would be really handy to practice at home.
Hi Greg. This is very intrested. Would you like to give me more info which movie is about transfer data from total station to computer because i got strugly to find. Please thanks Jakub.
As a Rodman recently released into the wild on my own I find these videos very helpful. Thanks for giving us some of your time.
Thanks Zap! Happy you like the vids :)
Thank you so much for sharing this you are helping me out alots thanks
My pleasure Hussein! Happy you like it and thank you for comment!
Well done Greg...well.shown...fajnie poprowadzone filmiki,.krok po kroku...
1Thanks! Dzieki, ciesze sie ze sie podoba :) Pozdrawiam!
Thank you very much. The video is of great help to me.
Glad to hear that 👍👍 Really happy to help!
Superb Greg. Excellent presentation. Brilliant.
Many thanks Asim! Glad you liked it :)
Thank you so much engineer !!
You are welcome! Thank you for comments 👍👍
Very good job!! Clearly and precisely
Thank you Pawel, glad you like it :)
thank you Greg. learning a lot. going through your videos one by one.
Hi George! Glad to hear that :) If you have any questions let me know.
Please likes and comments the vids as this helps with the channel. Thanks!
Thank you for the video. Enjoyed and learned a lot. Subscribed and liked already!
Thanks for the sub!
Great piece 🤝
Thank you Charles! Cheers👍👍👍
SOLID AS ROCK
👍👍
this is amazing sir, I always learn a lot from your videos. I am an upcoming geomatics engineer and let me say you have become my role model
Thank you 👍👍 Happy to hear that 😁 Bet you will be a great engineer 💪
Good work by you I was wandering if you got any video about traversing
Thanks.Not yet!
You are good teacher
Dear sir plese all kind information share leica ts 02 plus total station this chanel very very awesom lectures i love you
Thanks Taswer, I do not have access to TS02, but imagine that is very similar to TS06. I will try to get one of new generation models like TS03, TS07 and show in my channel.
These are so instructive! I am learning alot. Thank you so much.
Thank you atilla!!
Ok nice sir
Thank you for comment Enrique!
I really enjoyed d video, it has really helped me to remember sum of d tins I used to kno wen I had access to TS 06 Plus..pls, wen are u going to release a new video..??
Thanks :), Next video today and every Saturday. I will try to upload 2 a week, but can't promise yet :)
Very good and informative video just in time before my setting out course commences 😂. I am starting in Sep @ Finchley College 👍
Happy you like it Nikolay! You will learn here more then there, but still the 'paper' will be useful ;)
BTW there will be soon the best course ever available :) Good luck and all the best, see you on site!!
Thanks Greg, yes the paper is all what I need as I have been working on site for many years (started as labourer then carpenter then completed HNC and started working as site manager and just few weeks ago completed my BEng degree in Civil Engineering and now want to be a setting out engineer.
As always, please keep up with more good videos.
@@nikolayovsyannikov5314 Great story! Good luck and stay in touch!
Nice videos
Thanks for comment Daniel! Glad you like it!
Using this interface for the video is an great idea !!! It will be much helpful when you will use it for all your videos : is easier for us to listen your comments and watch what commands you use on controller...
Hi Sergi, I will do. Actually I am missing a video for TS15 setting. It will be with the interface :)
tnxs boss how to master plan to dwon the ground
Hi! Don't really get what do you want to know 😁
Thank you very much for these videos. I am really learning so much. Prior to this settings, do you already have your fixed points (RT1, RT2, RT3) known? If yes, how does one achieve such?
Thank you again.
Hi Ovie! The control points will always be given to you. I will show control points drawing in the drawings section. Sometimes you will have only position of grid pins (primary control) around the site and then you will have to survey/co-ordinate your new retros to be able to set out the site.
I mean from EDM or inside programme there is local survey witout reference point...so i would b very thankful if u could give me some new idea fr the layout of new bridge
You will need a reference point, you will need to set up the station, especially if this is a bridge :)
Greg do you keep all your station points under one job and your setting out points on a different job? Then change jobs after you do you take your backsight?
Yes, I keep control job separate and don't mix it with any other points also doing resections in separate job not to keep all the data in my control job
hi sir my question is what is the guid light in the EDM
Hi faramosh! When you look at the EDM you can find the centre of it seeing the lights. There is a different colour when you are on the left and different when on the right facing the instrument and thus you can find where the instrument is facing exactly (e.g. when you do a stakeout).
Hi Greg. Thanks for your tutorial videos. I saw someone has already asked for the virtual versions of the TS16 for practicing purpose. I almost have the same question. As far as I understand, there are/were/have been several software from Leica with different names which simulate different model of instruments. Like you mentioned in this video, the one is used here is Leica flexine. So my questions are: are these software open source or paid? What's the name of the latest ones which simulate the robotic instruments, ideally TS16 and 15? And how can I access them. Thanks
I downloaded them from SCCS page, but can't find it there anymore. It was for free. Separate simulators for flexline, viva and captivate series. If you find it please let the community know
Thank you for the brilliant resourceful videos.
I have one question , is it possible to correct the data if the reflector level was mistakenly set to 20m instead of 2 m?
Thanks Zerai! You will have to export data and take 18m off your levels. You can do it even in excel. Hope it helps :)
@@SITENG thank you very much. I highly appreciate it. I managed to correct it and looks plausible.
Great!
Hi, Im just starting out in construction. Is there a virtual option for the TS16 so I can practice with the settings at home?
Hi! Yes there is, but I can't find it anymore on the page I got it from, will check other page sent by one of our friends and if it's ok I will leave the link 😁
@@SITENG Thank you, really appreciate your help. Im working my way through all your videos and making notes as I go so this would be really handy to practice at home.
Hello engineer I want to ask how much is the price of ts09 in dollar?
Dependant on accuracy, but between 6k - 9k I would say. I am not dealing with equipment sales so the best if you look on net
@@SITENG thank you
no problem!
Hi Greg. This is very intrested. Would you like to give me more info which movie is about transfer data from total station to computer because i got strugly to find. Please thanks Jakub.
Hej Agnieszka😁 th-cam.com/video/jAbfK3KE100/w-d-xo.html