Thank you so much sir for your videos. Really useful for me. I learn all Leica manual Total station from your videos and my Institute. Now i ready to use TS-03, 06,07,09. Still i not learn TS-10 and robotic.
Thanks, yeah more and more robotics now in construction TBH, but once you know manual station well it shouldn't take you much time to pick up the robotics
Sir, if i learn only all Leica total station is enough? In uk Leica is using mostly in building settingout works? Or else like (Sokkia, Trimble, topcon) Plz tell me Leica is enough or not?
Leica should be enough, but sometimes they use other as well, but once you understand how Leica works you shouldn't really have a lot of problems with other kit
@@SITENG ok sir. Now iam expert in Leica and beginner in Sokkia sir. My Institute send me some sites weekly twice. There I can mark columns individually with TS. I saw different types of works like topography work, contour work, F.F.L marking work. Seperating property into 2 by using reference line. Then topography using Dgps
Hi Gamer, there will be videos from the site soon, but for now I am not working with local grid. I will explain how to work with local in my videos, but you need to wait a bit :)
Hi bro.. I just want to know.. What is meannig of meesage"set accuracy limit" for possiton ; hight; angle when i want to set station..sorry my english languge is not good enought to decribe my simple problem.. I hope u understand me..thanks.
You just have to put how much accuracy you need etc. 5mm 5mm 15' and then when you do resection EDM will tell you if you're out of this acurracy limits, it's nothing important as EDM will tell you the error of set up anyways.
Hi Collins! Base control have to be provided by the client and than you do secondary control setting the new targets and surveying them (can see on my last day in life video :)
Excellent Greg. Just one major point in the video. Please SHOW THE SCREEN CLEARLY of the Total Station as we cannot see it while you are giving the instruction about the next stage. Secondly it was not clear as to how you set the limits of the resection limits. Does it matter if you don't set the limits of the resection value? I like the way you press the Side Measure Button to measure while looking through the telescope to save time and to stop making an error. Brilliant device.
Hi Asim! Good point :) It does not matter really as you have to decide if you're happy with the resection. It will just show you that you are out of your limits showing X in the box. I love side buttons too :)
Hi Tony! These are 'given' points (control points), I will show this on next video where I'll show bringing the job to the robotic, hope you'll like it
Hi Greg, which is the most used total station out of these brands in UK-Leica, Trimble, and Topcon? Is it possible to work on Trimble if we study only leica? thanks. By the way, I checked out your website! looking good.
Hi George! I've never worked with Trimble, but once you know how EDM works it will be very quick to learn. I jumped from Leica to Topcon once and it was quick change (annoying at first though :). Website will be better, but I can't find time for it. If you can follow my site on LinkedIn please. I believe Leica is the most used in UK and definitely in London area and there is more and more companies using robotic ones now.
These were known, normally I do survey to set/check new ones. I will soon upload a video where I am explaining more about this topic so I hope you will enjoy it :) Great to know someone from Peru is watching the channel :)
you are simply the best Engineer(Teacher).😍
Thank you!!! 👍👍
Bardzo dobrze się Pana ogląda! Brakuje takiego kanału na polskim YT. Pozdrawiam!
Dzieki bardzo, rowniez pozdrawiam i milego ogladania. Myslalem zeby tez po polsku zrobic, ale narazie crazy busy :)
Thank you so much sir for your videos. Really useful for me. I learn all Leica manual Total station from your videos and my Institute. Now i ready to use TS-03, 06,07,09. Still i not learn TS-10 and robotic.
Thanks, yeah more and more robotics now in construction TBH, but once you know manual station well it shouldn't take you much time to pick up the robotics
@@SITENG yes sir. I saw your Ts-16 video too. 16 has little more options extra. Thank you so much for your information sir.
no problem, all the best!
@@SITENGThank you sir.
Thankyou, I’m learning 👍👍👍
Good to hear that Mark! Thanks for commenting 👍👍👍
Thank you so much engineer!
Thanks for commenting and always happy to help 😁😁
Thanks for videos
Thank you for comment Yavuz!
Great job. Thank you.
Thank you! Happy you like it :)
Sir, if i learn only all Leica total station is enough? In uk Leica is using mostly in building settingout works? Or else like (Sokkia, Trimble, topcon) Plz tell me Leica is enough or not?
Leica should be enough, but sometimes they use other as well, but once you understand how Leica works you shouldn't really have a lot of problems with other kit
@@SITENG ok sir. Now iam expert in Leica and beginner in Sokkia sir. My Institute send me some sites weekly twice. There I can mark columns individually with TS. I saw different types of works like topography work, contour work, F.F.L marking work. Seperating property into 2 by using reference line. Then topography using Dgps
@@jayganesh7167 great!
@@SITENG Thanks sir
Very impressive
Thank you Ovie :)
Hi Greg very good work but can you make video when you are on site with just one TBS where you got XYZ and you working in your local coordinates?
Hi Gamer, there will be videos from the site soon, but for now I am not working with local grid. I will explain how to work with local in my videos, but you need to wait a bit :)
Hi bro.. I just want to know.. What is meannig of meesage"set accuracy limit" for possiton ; hight; angle when i want to set station..sorry my english languge is not good enought to decribe my simple problem.. I hope u understand me..thanks.
You just have to put how much accuracy you need etc. 5mm 5mm 15' and then when you do resection EDM will tell you if you're out of this acurracy limits, it's nothing important as EDM will tell you the error of set up anyways.
Sir plz make video on how to establish control on new site
Hi Collins! Base control have to be provided by the client and than you do secondary control setting the new targets and surveying them (can see on my last day in life video :)
Excellent Greg. Just one major point in the video. Please SHOW THE SCREEN CLEARLY of the Total Station as we cannot see it while you are giving the instruction about the next stage. Secondly it was not clear as to how you set the limits of the resection limits. Does it matter if you don't set the limits of the resection value? I like the way you press the Side Measure Button to measure while looking through the telescope to save time and to stop making an error. Brilliant device.
Hi Asim! Good point :) It does not matter really as you have to decide if you're happy with the resection. It will just show you that you are out of your limits showing X in the box. I love side buttons too :)
What co ordinates are you using and how do you add the height to the point
Hi Tony! These are 'given' points (control points), I will show this on next video where I'll show bringing the job to the robotic, hope you'll like it
Hi Greg, which is the most used total station out of these brands in UK-Leica, Trimble, and Topcon? Is it possible to work on Trimble if we study only leica? thanks. By the way, I checked out your website! looking good.
Hi George! I've never worked with Trimble, but once you know how EDM works it will be very quick to learn. I jumped from Leica to Topcon once and it was quick change (annoying at first though :). Website will be better, but I can't find time for it. If you can follow my site on LinkedIn please. I believe Leica is the most used in UK and definitely in London area and there is more and more companies using robotic ones now.
@@SITENG thanks for the information, Greg! Appreciate your help. Am already following you on Linkedin.
@@MrSteefn Thanks!!!
How do you measure coordinates of tapes?
Hi Aldo! I don't understand what you mean :) Do you mean retro targets?
@@SITENGI'm sorry. I'm from Perú, my English is not good :-( I want to know what is your method for to give coordinates (x,y,z) to RT1, RT2 and RT3.
These were known, normally I do survey to set/check new ones. I will soon upload a video where I am explaining more about this topic so I hope you will enjoy it :)
Great to know someone from Peru is watching the channel :)
the EDM screen is not visible enough, if you could make it visible that will be great
Thanks, I will when recording next time 👍👍
Which one is better station orientation or resection... What's your recommendation...👍
I mostly use resection, by orientation you mean set up over a point and orientate the station?
@@SITENG i mean station orientation via back site. Thanks for the reply..