How to change a PVC door barrel lock (also known as Eurocell cylinder lock)
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Lost your key? Don't pay an expensive locksmith to change the locks. This quick video shows how I easily changed the barrel/cylinder lock on my PVC door using only two tools.
If this video has helped you please drop me a comment.
If you enjoyed it please click the "like" button and subscribe.
(C) consumedbynature 2019
Thanks mate. I evicted a lodger but suspected they had got a spare key cut. There are 3 doors, and the local locksmith wanted £280 to replace them. After watching your video twice I just did it for £42, in about an hour. Happy days.
£4 crowbar would've done the job just as well to keep the lodger out
@@-V33-Did consider that as a viable option, but as crackheads don’t feel pain like we do, I went for plan B 😄
@@Sydopath lmao ah yes crackheads require a more robust solution
Just brilliant, you just saved me €120. A local guy wanted to charge me €140 to supply and change the barrel. A new barrel cost me €19.99 from a local DIY store. Working perfectly!
Today, I had a quote for £150 from a well known local locksmith, couldn’t get into my front door from the outside. Saw this video and purchased a new barrel for £10.88. Thank you for this video!
Appreciate this video is 4 year old. Have you since upgraded to the 3 Star eurocylinder locks? They are Anti-Snap. Notice your lock barrel sticks out at the front (external side) Vice grips/pliers can break that lock off. The 3 star anti snap versions keep the door locked. Consider upgrading if not done so.
One of the best diy's I've seen.
Thank you so much for posting this video, you saved me from my crazy mother in law whose lock stopped working. Brilliant video, thank you!
Well done mate. Clear instructions with a cool approach. Loved the "Happy Days" conclusion. I'll start using the expression myself. Cheers
Thanks for the reminder. A great, thorough video. Thanks.
Thanks GREAT video! I had a problem inserting the new one because it was catching on something, it wasn't quite flush. I looked in with a torch to see it wasn't quite clearing a part just before it comes out the the other side. After 30m of failure, I got a screwdriver and levered it gently. I was careful as I am a disaster with DIY. Levering it slightly managed to free it. Job done!
Great stuff, well done.
Great video was not sure why lock would not come out but after seeing your video with the key still in barrel, Cheers !!
Thank you so much for sharing. I never knew it was so easy. You have saved me £'s. Thanks again 👍🏻
I haven’t tried it yet but I defiantly helped guiding in the right direction
Thank you so much you've just saved me over £100
Amazing mate cheers ! Its defo the little things in life 😊
Great video, very straightforward, no faffing. Thanks. very much mate!! 👌👍
A straightforward and perfect tutorial.
Especially for a key snapping fool like me!
Thanks fella
Superb tutorial, easy to follow, thanks very much.
Thanks for taking the time mate job done 😁
That was so simple!! Thanks so much for sharing!
My door had a recessed grub screw rather than the screw shown. This required an Alan key to remove. If you see a hole where the screw should be try shining a torch down it to find the type of key/screwdriver required to remove it.
I also needed to use the grub screw to secure the new barrel as my door dropped a plate down over it when deadlocking. At first I found the deadlock was being fouled and had to screw the grub screw in further to gain clearance.
The best and clear explanation, Thank you
THanks a million realy appreciate your clear and understandable instructions
Thank you. Very well explained. That will save me a few bob 😁
This is very clear, thanks
So you’ve just saved me, £150.00 thank you very much
Thank you for saving me calliout!
Thank you for such a great video, it helped me so much
Thank you , great tutorial I will be giving it a go
Saved me £99 thank you 👍
Thanks so much so simple we'll explained.
Huge fan from UK 💕
Worked a treat for me. Thank you.
Good video but i would still put key in door outside just to make sure it opens the door maybe
if your changing your lock I would recomend you get a "snap safe" cylinder
Good jod lad, ramp up the enthusiasm a bit and the bid becomes more shareable.
Brilliant video. Thank you!
Great. Thanks.
Thanks very useful
Thank you!
Nice one
Cheers bro 🤜
Have door closed and spring fitting in door is broken can I just change that to open the door
Thank you..
thank you
How you change it if you've lost your key and the door is locked
What if you don't have the original key? And there's been a break in..if you know what I mean
Thank you for sharing!
What do you do if the door is locked, jammed shut though?
Perfect many thanks
What about if you've lost the key?
Thank you sir i really appreciate it
Hi can you take the barrel out without a key?
Why didn't you buy an anti snap lock?
How much was the new barrel ?
Legend mate
What if you didnt have the key and the lock was drilled from the outside to open the door? How do I get the cylinder out of the door?
It's a thumb turn euro cylinder if that makes any difference so it can be turned from the inside of the door, would that do what the key would normally do from the outside?
Also I am pretty sure the cylinder that was bought for me by my brother (no idea what we were doing/needed to measure so he guessed in the shop) is slightly to small length wise, does this actually matter? I don't care about how secure it actually is, just need to be able to lock the door, no one will try and break in
Nice one pal.
I’ve lost my key for my patio doors, my doors locked. Would I just need to use brute force to snap the retaining screw to pull barrel out? Thanks
You will wreck the door
@@deangaryjames Not at all, I changed this not long after the video. Wasn’t too bad actually, the barrel broke in half quite quickly allowing me to pull out and open the door with a screwdriver and fit the new lock.
@@rabmc handy to know cheers
that new cylinder is less secure than original as it does not have break off section
I struggle like heck to remove the barrel until I watched your video - thanks to you all sorted now in less than 10 mins 👍
Thanks for this, my door would not lock. I took the barrel out, cleaned it, oiled it and re-aligned it, I did not even need a new lock!
I could hug you right now ❤😭 fed up with being stung financially. This helps me so much. I can't thank you enough. Really helped me and my family god bless
Something I will need to do shortly. So glad I saw this. Made simple and easy to follow instructions. Thank you.
Thanks for this video , im now changing all 3 locks by myself and saving a small fortune in the process and it's so simple
Sorry if someone has already asked, but I can’t get the barrel out no matter how much jiggling I do with the key on or not 😢 Any idea?
You might have to take the handle off first, the barrel might have lugs on the top of it.
Thank you for this straight to the point easy to understand video. I had a faulty lock which I reversed.
All working well now, and if needs be I can purchase a new barrel knowing full well that I now have the skills to fit and complete the JOB !
** Pauses video, runs downstairs to retrieve old lock from bin **
😁
Trying 🤣 to do my door thanks for your amazing video I thought I might need a man to help me thank you so much appreciated
Omg this has helped me so much how easy was that thankyou ❤👍
Your accent has me so mesmerized, I didn't follow a thing you said.. 😇
Excellent, didn't realise you had to turn the key slightly
Should have fitted a 3 star anti snap lock. Lock looks too long for the door and is sticking out too far at the front . Easy to snap it.
How do you change it if it if the door won't open?
Hi Tim if I’ve lost the key is it still possible to change the barrel?
Did you find the answer this is my issue
Cheers for the simple and straightforward tutorial 👍🏼
I used what I learned this past week on the front door of my new house 👍🏼
well done you've fitted a oversized inferior lock to what you had on before, that's why you pay for a locksmith they know what they're doing
Nice and easy 🎉😂
Thank you 👍🏼
Great video I can't get my barrel out as the key has snapped in my lock and unable to line it up to withdraw my old barrel any help would e apreciated
Hero
nice one
Thank you very much for sharing this video. After watching it, I managed to change my front door lock today . Really appreciate your tutorial 😊
Thank you very much for sharing your knowledge much appreciated.
When the key is straight, should the black part of the lock be flush or stick out a little bit?
This video is just what I was looking for, many thanks
You just saved me £75! Cheers 👍
What about when you've lost your key!
Great video. Thank you 😊
you are a star ! many thanks Tim
Thanks mate top one
Hi, great video. Just a question for you. The lock on my door is about 1ft down from the door handle. I've tried taking out the barrel but it doesn't want to move and I'm worried about forcing it. Any ideas? Thanks
Is the moving part of the barrel perfectly straight? If not, it won't budge. I'm sure you've tried the tweak the angle of the key slightly to try to move the barrel.
@@matskieden511 See my reply above, is there a recessed screw holding it in place? Also remember to wiggle the key once the screw is removed to get the central part in line
Great video,thanks.
Really helpful! There seen to be so many dodgy locksmiths out there that I'd rather do the job myself anyway (as well as the cost saving)! Thanks for the video!
A relative off mine, charged me £180 quid. For two standard yale euro cylinders. I called him because I got mugged, soo was in shock. I realised he did me over after he fitted it. Just now, told him unjustified to charge that much for locks he probably got for 25 pounds. We will see if he returns most of money.
@@man-who-sold-the-world Sorry to hear that mate, your dad was way out of order charging you that!