How to Change a Door Lock to a Yale Anti-Snap Euro Profile Cylinder lock | Homebase

[@dunknowfam]

That was very helpful !!

[@HouseFairyDIY]

I can't find a video showing how to install one of these locks with a thumbturn.

[@TDRoker]

Hi, I’m not sure how to phrase this but this door looks similar to what my parents have. The metal part in the middle of the door (where the cylinder fixing screw is removed), what kind of locking mechanism is that? On my parents it has 3 sort of hooks that come out when the door is locked.

[@timarnold1634]

Have done all this but Yale cylinder wont turn the lock. The cylinder I replaced was an Iseo one (made in Italy) and it looks identical. Any advice would be appreciated.

[@deanjohnson1711]

I have one of these anti snap locks on my wooden door cost me less than a tenner and took 5mins to change had to put in from the outside x

[@nozyspy4967]

Doesnt that mean someone can take it out from the outside too?

[@theman1233570]

How can I tell if my locks are anti snap locks?

[@johnwayne2362]

What if your key has snapped

[@viddaroshinns8258]

Your measurement of 60mm and 40mm corresponds to nothing you point out in the video. I see 32mm half way in.60mm is the middle of the end of second part of lock.... .The art of confusion.

[@mania7927]

Hi,Which meaaurement should go outside in instreet and which measurement has to be inside? Thanks

[@alandransfield1257]

How can I remove a Yale Barrel lock WITHOUT a key. I need to replace the barrrel lock because of lost key

[@shaunlewis286]

not going to be said on here hopefully. if you're inside on your property then simple. however asking questions like this without more info then.......Computer says no ;-)

[@pqrstzxerty1296]

Drill out

[@pqrstzxerty1296]

Get a bump key

[@paulessdee9569]

I can pick it in about 10 seconds - contact a local locksmith & they will oblige👌

[@fredmills368]

Because it was an old rusty cylinder outside for 20 years i had to snap it out instead 🙃

[@Gregdotgreg]

There's no need to remove the door handles. Why would you do that?

[@hydroman175]

I want to stop using a night latch system. What would I need to fit first to house the cylinder locks?

[@nutanagrawal3520]

This is desirable lock system! ............ :-)

[@johno4521]

The replacement lock is too long. And why remove the handles???!

[@dennis12879]

yeh now they will just put a brick threw the window

[@shaunlewis286]

if they are going that way then they will anyway and cause noise which any "competent" burglar doesn't want. you musn't be a "competent" burglar lol

[@DavidJHarrisonEssex]

So what are you suggesting ? Not to bother ? Burglars want the easiest/quietest & quickest way to get in.

[@JuiceBanger1]

Not all stray outside their preferred method. It's the MO

[@Koofumhead]

@@DavidJHarrisonEssex Sorry to poke my nose in but, with the kite marked locks installed a burgled homeowner has a better chance of having a successful insurance claim than one with the bog standard locks the double glazing firms often include. That's the fear that brought me here anyway.

[@Dinger154]

You don't need to take the handle off. "Experts at Yale" need to go back to school they certainly wouldn't get into Yale or Harvard based on this performance.

[@vdub8481]

You do need to take the handles off

[@kitzlynnlawrence7908]

Of course you do, good luck with getting the barrel through the hole with the raised security half spheres......👀

[@mania7927]

Hi, Which meaaurement should go outside in instreet and which measurement has to be inside? Thanks

[@naraharihari7963]

k