6" Lifted 3 wheeler on 30" Silverbacks Walk Around
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2016
- I have been asked around a hundred times online for photos and how I lifted the trike, well here is a walk around video, self explanatory of how its built really, check it out!!
This is 100% bolt on lift so I can bolt on and off if I want it stock hight again.
The wheels are front renegade wheels flipped bolted to a can am wheel spacers, I drilled the ATC pattern in the wheel spacer.
List of mods
-6 Inch Custom Lift
-30 Inch silverbacks
-Snorkel
-Custom Disc Brake Conversion
-Double foot peg
-YZF Slip on
-LED Light Bar
Follow me on Instagram andremartin92! - กีฬา
very impressive work !
That thing is awesome!
SWEET!!!!
I have an '86 250SX and love it!!
Thinking about lifting it. These kind of vids inspire me to do it!!
Do it up! Its even funner to drive lol
You have the best model for mud and water the shaft drive 250 is a monster
harder to do with a shaft drive.
@@davesilvia9711 Figures....LOL
nice trike buddy I'm considering lifting my 83 right now. am looking to build the lift kit this helps me allot thanks
Dam not too shabby..lots of ground clearance for one!
That thing is Awesome, you should fab up a little chain/brake guard for it.
You should just do a how to lift video.. would be more help. We would love a video like that. The rear looks super simple. But the front looks more confusing
Dude I just got to say that sucker looks Beast
Sweet trike
I am doing a lift on my three wheeler,but my only question is how did you find the same bolt pattern for the rim when you put bigger tires on it?
Wanting to put bigger tires on nice build man
What handle bars do you have installed? Looks awesome. Did you have to drill the can am wheels to fit?
How much different was the 54" vs the 64"? Did it struggle with the 30"s?
Can u possibly make a vid on your rear disk brakes never seen it before would really like to copy
what rear end did you use to do the disc brake
nice trike.
💯💯💯💯💯
Just bought an 83 200e for the sole purpose of building what you have . how long are the fork extensions on the front ?
as you could see,ours are still works in progress lol
Hi man ! There any reason to swap to a hydraulic brake conversion ? Did is possible to let the oem brake ?
What size sprockets do u have on front and rear
how do you put a lift on it???? same with a four wheeler? and how much was the lift?
Hi what rear end do you have on that I'm trying to find a better o e i have stock and chain keeps jumping
Did you do some grinding off the stock lower axle carrier mount on the frame to make the carrier fit properly? I see the stock chain tensioner keeper is missing of the stock lower left side bolt area. i tried this using all stock hole locations and no grinding and their is part interference.
Yes I cut off the tensioner on the frame, didn't cut off anything on the carrier.
How did you make your front lift?
Did you do the motor up
Is the rear carrier the stock one
How did you lift your front end
Any specific year for the yzf slip on?
I have a 83 honda 200s and its chain drive no rear suspension and i want to lift but i cant figure out how ?
How did you lift the front
Where did u buy the lift at
What kind motorcycle did that sprocket come off of
what all did you do to it ?
how did you do the front lift, im still confused on that
It’s basically just a fork extension, bolts right in and lowers the point of the eye
How many tooth sprocket on rear and front got same 200
Any issues with mud and water with the recoil starter or chain drive?
Zero issues.
What style/size are those wheels/trims thanks trike looks awesome
The are stock G1 renegade wheels flipped. 12" 4x137
Where are you from??? I would love to see this thing in person. I have 5 wheelers. Would like to create one of these. Brandon Grzesiak Saginaw Michigan
I am from NB, Canada!
That a 200x rear end or just the caliper and disc? I'm halfway done jacking my 200M up
Trey Thomas bunch of random parts that I put together, nothing off a 200x.
What are you using for bars? I'm stuck between ordering a set of protaper 7/8 atv mid/high/raptor or spending a couple extra and getting some fat bars, cant seem to find exactly which one is best tho as they all seem shorter height then my stock bars
They are just the stock bars, good enough for me lol
How did you get that pad to fit? I just picked up the same bike, would love to do some of these mods
What Song is that
how did you go about lifting the rear end? the front is pretty obvious but did you just make the lower bracket and use the original lower for the top of the axle. if that makes sense. im working on one i just want to have a decent plan
mike risso That is exactly what I did.
thanks for all the help! its really awesome, now im having trouble finding wheels with 4x150 bolt pattern, did you use different hubs or drill out wheels or am i just not looking in the right places??
sorryfor all the questions lol but are all 3 stock front renagade wheels? and did they bolt right up? obviously you had to use a spacer to run wheels backwards but as far as bolt pattern goes
Where did you find the larger sprockets?
My local dealer, the biggest one they had of a random bike and drilled my own bolt pattern into it.
What did you do about the funky 4x150 pattern? I cant find any 12" wheels
Made a custom wheel spacer that goes from 4x150 to 4x137 to use can am wheels.
@@andremartinbike thanks for the info, plenty of broke down can around to get some wheels off of
well mines up and runnig,but i have to ask you,how are your sub trans gears holding up with those 30s? i have 28s and seem to blew out something in my sub trans during test ride today.
Dan Mang no issues yet and I ride it hard lol
André Martin haha well thats good to know. i just got worried id be having nonstop issues but your running alot heavier tire so ill fix mine and see how it goes haha. ive posted pics on facebook too 🍻
Hey man, new subscriber, how did you rig up the disc brake on the back?
Welcome! I fabbed and welded a braket to the carrier to hold the caliper. Same thing with the disc welded to the drum hub.
@@andremartinbike do you have any more pictures or could you do a video on this? I got the same type bike, looking to do the same because my drum brakes and seized on solid haha! Thanks for the reply.
- Burden
Can you send me a few pics of the brake set up? Steve.roll@ Hotmail. Com thank you! Happy holidays
I don't have any pictures on my new phone but I will do a video on how I built it shortly, a lot of people have been asking for it!
what offset
You think a Honda 200x be a good frame to use for this
MUDMOWERJAY J a 200x has a swing arm this dont
We're did u get the rear sprocket from ? all I can find are the 47 tooth and the 52 tooth ones the center is to big to drill?
Brad Morris random sprocket at my dealer drilled my own bolt pattern.
I thought u drilled it I'll have to just bring my spare axial in to find one thanks !
where did you get the rear brakes?
Nathan McAnally Bunch of randon parts put together. Lol
Hey andré I have a 1984 200es and I wanted to know if bear claws are good on a 3 wheeler and what size should I go?
Yeah they work good in every terrain and 25 by 12 wide is best.
Okay thanks
would you sell it
Lifted for xtra danger
Garl Gamp believe it or not, its more stable like this, much wider.
How did you lift it. Thanks
Sean Valck Built some brakets, video is self explanatory really.
How did you drill the spacer even ?
Measuring tape and a drill press.
how did you get that rear disc brake on is it welded to that metal sleeve? Really need to do mine
Yeap.
@@andremartinbike Did the caliper line up to the old holes the drum screwed into or did you make a custom mount? I have an easier idea for getting it to work I think but not sure how to mount the caliper
I built a mount and welded it to the carrier.
How did u get the front wheel centered?
With a 1 1/2 wheel spacer
I am doing this to me 83 200e but wondering what hubs you are using? are they the stock ones ? very hard to find tires and rims for stock hubs
Stock hub with a custom wheel spacer to adapt to a 137x4 bolt pattern.
@@andremartinbike how much for a front lift kit like yours I'll gladly pay u for a pair I've watched this vid 100 times I still don't understand how u did it
@@nunya1996 I will build another wenever I have time!
@@andremartinbike awesome man I really appreciate it I really do
How does it pull in high range with those tires ? Does it kill the clutch ?
No, it runs surprisingly really good.
André Martin I'm going to mirror your build but the hi/lo range motors are hard to find so thats why I'm asking . Thanks for the reply
Did you have to go your clutch to spin those tires in mud? Becuade I did this to my 185 with 26 inch outlaw and it doesn’t move the tires in mud
Sean Valck You need a very big sprocket in the back, mine has low range which makes a huge difference also.
André Martin how many teeth front and back
Sean Valck you would need a 70t rear.
André Martin where did you get yours
I have a 185s Sean valck. I didn’t want to lose any power and didn’t want to change any thing on rims so I just went went bkt w207 same 22x11-8 tire as stock. Will get through any mud and won’t stop spinning.
What video shows the lift
This one lol
What size wheel spacers? And did you have to out in longer studs or no??
1.5" 4x137. Not sure I understand your question.
Did you have to change the studs for longer ones?** Lol sorry
No the wheel spacer has its own studs.
hey I was curious did u make ur own lift or did u buy it
JTbassin 10 Made it myself.
André Martin how did u make it
anyway i could get a link for the rims u have im doing this to my 200 bigred
Brett Evans they are front Renegade wheels
Brett Evans stock
Is this 12x7 the rims ?
Yeah, from a gen1 renegade
Is that a 200e??
Yes.
Can you please tell how you did the rear brakes?
400ex disc brake, polaris outlaw rear caliper and build mounts.
@@andremartinbike how did you mount the disc? Any water issues for the bearings getting rid of the old drum casing?
@@nedflanders7652 No issues with bearings, I cut up the drum brake and welded a rotor on the spline part of the drum lol kinda hard to explain.
@@andremartinbike Hmm really need to figure something out I put 27" silver backs on mine and without any brakes shes sketch, You wanna make me one?? Lol
What Size and Brand are the Rims and Tires??
G1 canam renegade wheels and 30 inch silverbacks
i like,thanks for sharing. are you on facebook? i could send pics of our 200e in the works. lift is pretty much done now onto wheels,tires spacers and a couple other odds and ends. my buddy has a couple vids on youtube here under 200e senior and junior,or something like that lol.
Yeah! Send me those photos lol
haha well just tried to search tour name but facebook is goofy lol my name is dan klein and i have a red car as my cover if you wanna try to find me too.
Can't find it, maybe put the link to your profile lol
I watched the lifted wheeler video I wanna know how to lift one of my atcs very interested to no
How did you lift it ?
Where can I get a front tire like this exact one? For a 1985 200s
Brian Mackie Probably any local ATV dealer.
What rear disc brake set up did you use? Final drive gear?
Its a bunch of random parts put together. and 54T in this vid but now running 64T.
How do you lift the forks?
Can u Build me one
do you have any motor work done
Mitchel Mulkey nop
Is that an 82 big red??
Fever Nation 83 200e
Would a 200S work as well? Do you think a Big Red 250 would be better than he 200? Great video, thanks.
man if your putting in all that money on this get the right gas tank for your 200e or 200m or 200s or 200 dont use a 200es big red tank on her with your chain on the back end and your snorkel kit so you can breath under the water to but your chain back on
How many fucking times you going to walk around the bike?! Fuck
455 stage-1 Enough to make you comment on it ;)