Peep sight fixes without a press
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- In this video, I demonstrate a quick and easy method for fixing your peep sight without the need for a bow press. I walk you through the step-by-step process, providing tips and tricks along the way to ensure your peep sight is properly aligned and functional. Whether you're out in the field or at home or o the range, this DIY solution will help you get back on target in no time.
Thanks so much, and cheers mate 🎉 I have been struggling with this myself, heard about the small bit o D loop cord, but no one knew exactly how to place it with no press.
New subscriber ❤ those of you from New Zealand, and Australia, are becoming some of my favorite people. One has become my arch nemesis at distance shooting, but he has changed classes now from 6.5 Creedmoor, to 338 Lapua. His Creedmoor record was 1620 m, I’m now at 1640 m. We share a little bit of wildcat loading info, but we both have one or two recipes. Nobody is allowed to have. Someone even stole both of our dope books at the range we practice at to get the loading data. Lucky for us that information is only recorded in books, we keep in our gun safe! He used to mark his loads on his ammunition box, until I told him anybody could read it! I told him I keep all mine locked up, he’s doing the same now.
Thanks for a great easy explanation that will save me having to go to an archery shop for a bit of cord
Thank you so much and welcome to the channel. I have some exciting videos on the way and appreciate all of you!
Good luck with your shooting with rifle and bow!
Some strings are better than others.
Shout out to Joey’s Bowstrings for staying put. Best I’ve ever used.
These are all great tips also! Thanks!
Heard good things about his strings!
Thanks for good, practical information.
Thank you!
please check your left thumb
It is paint. Thank you! For marking voters in elections
Cheers Mate, great advice 👍
Glad to help
Yup. Agree with everything you said. These are basically the only ways to adjust a peep. I will also add/remove a half or full twist on my string from the bottom cam when first setting the peep up... its usually the first thing I do if its not sitting well enough... then once its very close I use the D loop and serving to fine tune it. I have used the string splitter to tune peeps before and they do work okay... but now I just tie around my peep with a good knot... then put a short section of serving above and below at the Y in the string and will mess with those if need be. When shooting in vastly different weather and temps it helps a lot. In the winter when I am only shooting indoors, I will often clip the serving off since temperatures and conditions are super consistent, and then I usually tie them back in for summer. On super hot days with blazing sunlight, its not uncommon for peeps to twist slightly, and with the new style target peeps like the podium, pxs, and hamskea, they have to be aligned perfectly. Its definitely helpful to be able to slightly maneuver your peep in the field when shooting outside.
Yup agree with you. Thank you very much!
How would a person fix a peep that turns while drawing the bow? Currently it is a guess how far to have the peep turned to the side to start with so the peep will turn to the proper position at full draw.
If you have a press you will need to press the bow and twist the string
th-cam.com/video/m_kIo-JI5L4/w-d-xo.htmlsi=zikGybHc36Pe4g-x