Great video! But, those endlinks and brackets should've been torqued at static ride height. You've introduced lots of preload tightening the bolts while the wheels were in the air.
@@thomasd8735 says to do it in the 034 installation instructions. And yes, If you don’t, you feel the binding (preloading). Also, there are torque specs for the sway bar brackets on the chassis
I found out that the end link’s rubber bushing will twist if installed while the suspension is not compressed to ride height. 034 told me that it will cause premature wear on the end link bushing (because the bushing is in a fixed position and only designed to move a certain amount).
Yo Kev.... watching you put those spacers on your B8.5 S5 I ordered 25mm all the way around because I wanted them all equally pushed out, and I must say, my fitment game went super saiyan God haha... Like the videos keep it up, gonna start dropping my journey in my B8.5 S5 stage 2 034
It would of been much easier to access the top bolt if you had taken the wheel off. Plus you need to pay close attention to the bush to ensure you are not damaging it as you are undoing and retightening.
Great video! But, those endlinks and brackets should've been torqued at static ride height. You've introduced lots of preload tightening the bolts while the wheels were in the air.
I’ll make sure to bully Rory
Does that really make a difference?
@@thomasd8735 says to do it in the 034 installation instructions. And yes, If you don’t, you feel the binding (preloading).
Also, there are torque specs for the sway bar brackets on the chassis
@@jonathandeuire6962 where can I find the torque specs for my Audi b6 2004?
I found out that the end link’s rubber bushing will twist if installed while the suspension is not compressed to ride height. 034 told me that it will cause premature wear on the end link bushing (because the bushing is in a fixed position and only designed to move a certain amount).
Yo Kev.... watching you put those spacers on your B8.5 S5 I ordered 25mm all the way around because I wanted them all equally pushed out, and I must say, my fitment game went super saiyan God haha... Like the videos keep it up, gonna start dropping my journey in my B8.5 S5 stage 2 034
Getting this done bro before the Montana road trip coming from Seattle 😂😂😂😂
@@Aliastaylor heck yeah! That’ll be awesome
Facts bro.. I have these on my S5 b9 .. The entire driving dynamics changed.
Crazy difference
Changed in what sense?
We need to do a driving test! this is by far one of the most effective mods we have done!
Makes sense why so many people do it🤘🏼🤘🏼huge difference
Damnnn I’m trying to catch up!! Wait for a couple of mods for me when I get done ✅ lmao 😅
More mods just came in the mail for this car😂😂😅
@@KevG looks like the car is going to sema car show next year in Vegas ..
It would of been much easier to access the top bolt if you had taken the wheel off. Plus you need to pay close attention to the bush to ensure you are not damaging it as you are undoing and retightening.
Does it matter if the wheels are hanging or if they are supported (like on a lift that you drive onto)
Should do it at static ride height so ramps are better
Which setting you have it on? Soft or hard?
Hard
I dont understand the use of the rubber gloves.
Keep the hands cleaner than without 🤷🏼♂️
why would you want dirty hands when you can have clean hands??
Dumbest comment you'll hear all day I promise.