AMP Research Bed Step Install! Will it support me?!
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Use code: KCTUNDRA to save 5% on all your Toyota needs at Sparks Parts:
www.sparkspart...
Join me in installing my new AMP Research Bed Step! Is it what you need for your pick em’ up truck??
Here’s the link for everything I’ve put on my 2019 Tundra Build! Check it out if you’d like!
All the parts on my tundra from Amazon are in this link as well as camping gear and tools I enjoy!
Amazon affiliate link: www.amazon.com...
TRD Mountain Decal: www.amazon.com...
Driver’s side grab handle: www.sparkspart...
Interior LED light kit and Reverse light: www.amazon.com...
Antenna: www.amazon.com...
Tailgate Inlay lettering: www.amazon.com...
N-fab running boards: www.amazon.com...
Start-X Remote Starter For Toyota Tundra 2018-2020: www.amazon.com...
Pedal commander: www.amazon.com...
Pro-Comp leveling kit: www.amazon.com...
Tonneau Cover: www.amazon.com...
WeatherTech Floor Mats: www.weathertec...
Granite Alloy Wheels: m.tirerack.com...
Falken Wildpeak Tires: www.discountti...
RCI Skid plate: rcimetalworks....
TRD Exhaust: www.sparkspart...
www.sparkspart...
Amp Research Bed Step: www.amazon.com...
Wireless Phone Charger: www.sparkspart...
Tail Lights: www.amazon.com...
The Instructions that come with this blow... thanks for doing this video! Helpful 💪🏻
Totally agree!! No problem!
I installed one of these on my Silverado. The main bracket is no problem. The biggest problem was attaching the smaller secondary bracket. The instructions weren't the best.
73 good for you I'm up here in NE Ohio 30 all day. Thx for this vid I definitely will be getting this soon.
Yeah quite the shift though it’s now 38 here, but we are about to head back home to KC and will be greeted with 3-5” of snow! So pumped! Have a happy new year man!
Add some washers where you bolted to the frame, just enough to lower it by a hair. That will stop it from hitting.
That’s smart!
I like where you put this. No one ever does that. It’s always on the back. Need to do this.
Honestly I wish it came out the corner a bit more because it's a little tough to use, but it's still functional for sure! Thanks for watching man!
Thanks for paving the way for others!!! Lol. mine was a pain to install as well felt like a few times a third arm would have been helpful. Mine hit as well, part of me wonders if that might be by design to have a spot for the foot to grab when pulling down. But I think I can live with it.
I did the "Bestep Trek Step Tailgate Step" and it also was a pain to install, but well worth it. I use it every time I have to go into my bed. Definitely worth the trouble! You look like you're bigger than me, I weigh 220 and it has no problem hold me.
Yeah I’m hoping to get some use out of it! Bummed that it doesn’t come out at an angle off the corner though. The side makes it kind of tricky to use.
I installed the same bed step in my Tundra. I thought I did something wrong because it comes on the side and not directly on the tailgate side. Mine I also hit. It’s been helpful especially for my kids.
Glad I got it installed the same way as you! I’m sure the kids appreciate it for sure!
Every time I have to shimmy my butt onto the tailgate and do some kind of Mission Impossible maneuver to get into the bed, I wonder what goodness a bed step would be like to do this a bit more elegantly. Wonderful install my man!
Hahaha mission impossible maneuver is exactly what it feels like! Thank you for putting that into words lol Happy Nee Year man!
the video didn’t even start yet I went ahead and liked the video haha. Happy New Years to you and family. I heard your dad got a 2014 too lol that is what I got with 23k miles.
Hahaha I appreciate that! Happy Nee years to you as well! Yes he’s had his for a few years now actually in the 1794 configuration and loves it! I’m glad you got one they are pretty great!
I installed the Toyota OEM version. It installs a little different but it’s one of the best mods I’ve done. Happy new Year! 😎👍🏼
Does it come out at an angle off of the corner?? That’s what I was hoping for but it didn’t!
@@kccreations5945 it pushes out towards the back corner of the bumper. I think it’s the same company that makes them for Toyota but the bracket definitely looks different.
@@TristanTris321GoT that makes sense. Maybe I can find a different bracket or something. But it’s definitely better than nothing!
@@kccreations5945 for sure. Trucks looking good!!
@@TristanTris321GoT thanks so much!
Hello
What is the model and item number for the tailgate step?
Will they work on right side
Why are they all on drivers side
I love your mod videos! Love your truck!
I trashed the bracket. Thing seemed unnecessary to me lol.
hahaha wow this was a lot more fun to watched then it was useful. you made my day sir. 3:53 we are going to use the impact gun or not!
so! what happen to the impact? did not see the bolt turn or got lose.
I used an air impact! Sorry I didn’t show it!
I installed the Toyota OEM step that opens when pushed backwards. It was quite a challenge working under the truck with the components barely fitting but it’s one of the best mods iv done. I use it all the time. The one from Toyota when closed does not touch the bumper.
I need to look into that and see what it looks like because that sounds cool! I've gotten to use mine a couple times so far and its a little tricky with it coming out the side so that's been a little bit of a bummer for me. I'm glad you enjoy your and thanks for watching! Like and Subscribe if you'd like!
I too have the one from Toyota and it doesn't touch and is a life saver when getting up into the bed of my truck. The original bracket had to be removed and their bracket had to be installed though.
@@lijianli if you cut the original bracket while still on the truck, can’t you install without taking apart the bumper corner?
@@lennyperry6210 I don't think you can remove it even if you cut it. Plus, theirs seem more robust because the stock one it's flimsy and easily bent. But overall or was well worth the time and effort.
Got it cut but can’t get the bolts to loosen with the tools I have, smh
That step was made to be installed to the side bed not corner back , on mine f150 it is like that
You answered the only question I had... How tight is that capacity? Thanks!
Hi love ❤️ the install I want to get me one of them I need it I’m so short! Do you know where they bought it ?
Hey thanks! The link to all the items on my truck are in the description of the video! Hope that helps!
@@kccreations5945 thanks, I called places to get it installed and it's so expensive they want to charge me $475!
@@veronicaserrato9827 that’s insane! It’s really not too bad of an install if you have a basic socket set!
@@kccreations5945 I don't but my friend said he probably could do it for me but im afraid he installs it wrong.
Wish I could bolt one of these on the back of my teardrop camper.
Oh that’d be cool! I have a teardrop too!
What torque wrench do you recommend?
I have one from harbor freight! Works great!
Dope videos bro!
Thanks so much! I appreciate the support!
What is the weight capacity?
😊
Great video. Looks pretty solid. I was wondering was it was so expensive.
Yeah it was over $200 but it’s built tough so that’s good!
Doesn’t look like this is the right part , should not hit the bumper when closed . I just installed the oem one from sparks parts pt39234140 and it fits perfectly and doesn’t hit the bumper whatsoever. Also I cut the main support bracket rather replacing it with the one that came with the kit
Yeah I’m not sure if it’s the right part either. I don’t have it on the truck anymore as I installed dual exhaust. Did you use my coupon code KCTUNDRA for 5% off??
@@kccreations5945 oh man , missed it 😢 didn’t know you have that , I will keep that in mind next time i order something
@@jrahme for sure man! Sorry I didn’t broadcast it better!
I don't like plastic step. Up in cold weather you bump it broken.
Way over price
it worked great through the winter! Ice and negative temperatures and all it was fine!
Why do you edit so much out? Just when I was real interested, you cut that part out and go to something else.
What part?? I try to keep it simple and to the point on install videos so that people can get the info they need. And a lot of people are just here for step by step info and not the whole process.
3:56 is what happens when you buy cheap Chinese crap built by ridged sold at home Home Depot
Hahaha okay... I’ve never had an issue with any of my ridgid tools. An impact driver isn’t meant to remove something that tight but I didn’t have the room for anything else. Take your negativity elsewhere.
@@kccreations5945 ok emo
@@kccreations5945 I’m just saying ridged is made in China and it’s junk. I’m sorry you’re so butt hurt and that offended you.
Annoying music...
Any recommendations for my next album??
It seems Mark Knopfler and/or Dire Straits are copyright free as their music is constantly played on audio equipment videos I watch….but I’m not certain on that.
Sorry but Looks terrible
Hahaha okay
I guess not buying that brand. I don’t want that hitting my bumper
I just bought the Toyota factory OEM bed step: PT39234140