Greetings from London. Done this job and others on my MK4 CRV thanks to your videos. It has 55k miles on it but I am all about preventative maintenance. Cheers
Thank-you. I had difficulty in opening my airfilter box to clean.my Mass Air Flow Sensor. There's something behing that doesnt enable me fully remove the lid. Anyntips?
Great job showing how to clean it. I made a video on my channel on how to replace it. But now that I think back to it,I could have just cleaned it using your method!
@@GarasiFelixDan So for maintainance purpose, I do not need to replace the pcv valve, I can only clean it, wright? I have an CRV 2007, automatic petrol, 117000 km. I have cleant the TB and the MAF sensor today, and next week I am planning to clean the PCV valve, and I want to know if it is worth clanging it. Thanks
@@GarasiFelixDan Thank you for the reply. Can I ask one more thing? Do you think that the TB cleaning spray will do a good job with cleaning the PCV valve? Thanks
@@GarasiFelixDan so my R20A3 2.0 accord idle is rock solid, engine silent, MAF recently cleaned, plugs changed, intake valves decoked. However slight miss when feathering through the gears with low revs? Could it be the pcv needs a clean might help it?
Hi Felix. Like always a very comprehensive clip and very useful. Can you help me please locate the thermostat on a Honda CRV 2007 2.0 automatic, just like yours. And you can make a clip with this as wel if you can please. Thank you
Asid Mohammad cheers . With the mazda CX 5 pcv valve . Its located just behind the intake manifold. I will definately do it , once i reach the schedule for another intake valve cleaning and will have to remove the intake manifold . As for now. I dont think i can do it as yet. But i will try my best to post this episode up sometimes for all of us. :)
Hi Felix Dan, can you guide me where is this engine IACV located? Cause my idle seen not that smooth, with AC ON will up and down.... Do you have any suggestions?
@@GarasiFelixDan Worked with 17mm deep socket for my 3rd Gen CRV 2007 R20A1 AT. Might be different sizes socket between AT and MT. Thanks for this great tutorial once again..!
Kalo pcv valve rusak bikin mobil meledak ledak di rpm bawah+ gas di geber sampai rpm tinggi trus gas dilepas langsung ngebul putih dri knalpot beberapa detik gan?
@@GarasiFelixDan padahal suhu mesin aman, coolant juga g berkurang walau digeber sampe 200 km/h gan, cuma kalo gas digeber posisi netral sampe rpm 6000 an pas lepas gas tiba tiba keluar asap putih dikit beberapa detik trus hilang. Owh iya unit CRV 2.0 mt ecu stdr remap om
Udah ditanya di beres honda om, harus inden lama. Apakah selang/hose pcv dari mobil lain dengan ukuran yang sama bisa di pakai om felix ?maksudnya tidak original nya gitu. Makasih om
some people will not have the luxury / funds to replace as part maybe expensive in some country. If they were that cheap i would not bother cleaning it too.
why spend that extra money when you can clean this, EGR, MAF and Throttle Body with similar cleaners that are $12 (CAD) a can? You can also get multiple uses out of that cleaner down the road.
Greetings from London. Done this job and others on my MK4 CRV thanks to your videos. It has 55k miles on it but I am all about preventative maintenance. Cheers
you r welcome sir lemme know if you need any tips n trick on your Honda CRV.
Thank-you. I had difficulty in opening my airfilter box to clean.my Mass Air Flow Sensor. There's something behing that doesnt enable me fully remove the lid. Anyntips?
Please share to for how make clean MAF and throtle body Honda CRV gen 3 (2007-2011). Thanks
Here is for the throttle body th-cam.com/video/endz9Xje8tg/w-d-xo.html. Thank you for tuning in.
Oh, i already seen your video too for cleaning the MAF. Sorry about that, when i suggest u too teach how clean up the MAF. Thanks
What is the hose connect to middle all the way to the fire wall driver side
brake master cylinder hose
Question. Is that the hose to hook up an oil catch can to?
yes correct 👍🏼 lemme know how you go with the install.
Great video! May I know what did you apply to the thread before inserting back the valve?
antiseize paste.
Great job showing how to clean it. I made a video on my channel on how to replace it. But now that I think back to it,I could have just cleaned it using your method!
Dynamic Garage cheers
@@GarasiFelixDan
So for maintainance purpose, I do not need to replace the pcv valve, I can only clean it, wright? I have an CRV 2007, automatic petrol, 117000 km. I have cleant the TB and the MAF sensor today, and next week I am planning to clean the PCV valve, and I want to know if it is worth clanging it. Thanks
@@zahariafelix if its still in a good working order just cleaning it should be just fine.
@@GarasiFelixDan
Thank you for the reply.
Can I ask one more thing?
Do you think that the TB cleaning spray will do a good job with cleaning the PCV valve?
Thanks
@@zahariafelix yes definately does clean it very well
Hi what are common symptoms of a had pcv valve? Can it cause slight misfire?
yes definately can cause misfiring issue if the pcv is caked.
@@GarasiFelixDan so my R20A3 2.0 accord idle is rock solid, engine silent, MAF recently cleaned, plugs changed, intake valves decoked. However slight miss when feathering through the gears with low revs? Could it be the pcv needs a clean might help it?
@@bronniesboy give the pcv a good clean , check the hose for leaks / cracks. Lastly check your sparkplugs. 👌
@@GarasiFelixDan sorry Felix i forgot to ask what was your symptoms? Did the clean correct it? Can you use carb cleaner
Hi Felix.
Like always a very comprehensive clip and very useful.
Can you help me please locate the thermostat on a Honda CRV 2007 2.0 automatic, just like yours.
And you can make a clip with this as wel if you can please.
Thank you
thank you man. So the thermostat assy located on the upper coolant hose on the engine block.
Thank you Felix. You have helped me once again. I like your clips, very easy to fallow your instructions.
Hi Felix Dan. Please do a video of the job on your cx-5. Thx.
Asid Mohammad cheers . With the mazda CX 5 pcv valve . Its located just behind the intake manifold. I will definately do it , once i reach the schedule for another intake valve cleaning and will have to remove the intake manifold . As for now. I dont think i can do it as yet. But i will try my best to post this episode up sometimes for all of us. :)
Felix Dan You are the best🤗 I have learned so much since I found your channel. Thanks for posting bro.
Very clean man you are keep going do mor job for your Honda CR-V I have got exactly mk3
Thank you for tuning in. Keep updated by hit that notification bell so you wont missed any of my new videos . Appreciated your support :)
What are the symptoms of a clogged or dirty pcv valve?
so common issues n symptoms of clogged / dirty pcv are rough idle , sluggish acceleration , increase oil consumption.
17mm deep socket for my R20A3 accord 2009 in case anyone needs to know
cheers mate noted.
Do you have part number for the PCV valve aswell?
Can`t find the part anywhere.
Good evening, how much torque (kgfm) did you used on torque wrench? Regards from Brazil
25 - 30lb should be okay.
forgot to mention on video the torque spec for this one?
25 - 30 lb should be okay
Hi Felix Dan, can you guide me where is this engine IACV located?
Cause my idle seen not that smooth, with AC ON will up and down....
Do you have any suggestions?
i think it was near by the throttle body.
What type of spray have you used to clean it up?
Any throttle body cleaner will do the job. Try CRC.
@@GarasiFelixDan What about AC Delco carburetor cleaner
@@مقاطعمتنوعة-ت4ن will work the same :)
Thanks for the video!!! What kind of cleaner did you use to spray on the valve and hose?
Gumout parts cleaner
Bro Felix.. Tried 14mm deep socket and it's too small for my R20A1 PCV Valve... What socket size did you use in this video..?
i did use socket no 14mm . maybe check yours again… ?
@@GarasiFelixDan Worked with 17mm deep socket for my 3rd Gen CRV 2007 R20A1 AT. Might be different sizes socket between AT and MT. Thanks for this great tutorial once again..!
@@newbiefornow Ahh i see glad it works man :)
Are you sure for the 14mm socket size? It looks like 17mm to me.
Some owners use 17mm some others use 14mm.
Thanks!!! From Brazil!!!
You're welcome!
So helpful, many thanks
This one cover how to clean MAF sensor th-cam.com/video/miSvhq_zucs/w-d-xo.html
What happened to the crush washer?
I had reuse the gasket (crush washer) mine still in a good cond.
Does the car tell you to do this maybe by a warning light?
Nope.
Bang kl di mazda cx sama cara rawatnya?
iya hampir sama , hanya saja posisi pcv mazda cx lebih ruwet untuk di bongkar tidak semudah punya Honda .
Is this valva same place as hrv2020
would b different because different engine.
do u know were is it located then?@@GarasiFelixDan
Kalo pcv valve rusak bikin mobil meledak ledak di rpm bawah+ gas di geber sampai rpm tinggi trus gas dilepas langsung ngebul putih dri knalpot beberapa detik gan?
tdk begitu klo pcv rusak hanya berebet saja. asap putih kemungkinan head cyl bermasalah.
tdk begitu klo pcv rusak hanya berebet saja. asap putih kemungkinan head cyl bermasalah.
tdk begitu klo pcv rusak hanya berebet saja. asap putih kemungkinan head cyl bermasalah.
@@GarasiFelixDan padahal suhu mesin aman, coolant juga g berkurang walau digeber sampe 200 km/h gan, cuma kalo gas digeber posisi netral sampe rpm 6000 an pas lepas gas tiba tiba keluar asap putih dikit beberapa detik trus hilang. Owh iya unit CRV 2.0 mt ecu stdr remap om
@@Reza-su6hg bole coba di bersihkan dahulu pcv valve nya. Jika tdk berhasil coba check parts yg lainnya.
What parts cleaner did you use?
Crc brand. Or any parts cleaner that are safe for the parts.
Felix Dan I have Gumout Carb, Choke, & Parts Cleaner and I have CRC Brakleen Brake parts cleaner
@@joehumeas7196 gumout is good too. Either one should be alright.
Bro felix, itu hose atau selang pcv nya bisa cari dimana ya? Soalnya di marketplace ga ada yang jual.
apakah uda cari di honda lgs?
Udah ditanya di beres honda om, harus inden lama. Apakah selang/hose pcv dari mobil lain dengan ukuran yang sama bisa di pakai om felix ?maksudnya tidak original nya gitu. Makasih om
@@cadavikardinal6355 sementara pakai yg silicone hose saja kalau begitu. cari diameter yg mirip original nya.
what an insane amount of dirt
hahahaha
his one is not dirty, older cars will be much more gunked up
How many miles need to replace it
if its not broken you dont need to replace, just service it every 20000kms
i can clean it with nrake clleaner? wich one and shoild i need to replace the hose connected to it?@@GarasiFelixDan
@@Hardenth50 intake cleaner or any parts cleaner will do.
thnak nice of u also is cleaning egr would be the same? can clean it also for a maintenace purpose@@GarasiFelixDan
@@Hardenth50 yes will be the same please check my other video for egr cleaning.
Can i use a Non abrassive soap and water on cleaning the hose?
yes definately u can
Not possible to entirely clean the guts of a PCV valve. Much better off installing a new one given how filthy the current valve is.
You have to shake the valve after cleaning if you hear sound then it is good but if no movement sound coming it means you should change it
My question is why bother cleaning a part that cost under $9 to replace you should replace the hose and the valve.
some people will not have the luxury / funds to replace as part maybe expensive in some country. If they were that cheap i would not bother cleaning it too.
why spend that extra money when you can clean this, EGR, MAF and Throttle Body with similar cleaners that are $12 (CAD) a can? You can also get multiple uses out of that cleaner down the road.
That's a 1.7 4cyl not the 2.4 4cyl civic not crv
this is 2.0 ltr. R20a1
That true. i have the same car like him!!!
thank you .
What type of spray have you used to clean it up?
CRC brand cleaner
@@GarasiFelixDan don't have that brand much in Europe. Is it a carb cleaner solution?
@@bronniesboy correct sir. get a brake cleaner or carb cleaner. Either ones are good to use for cleaning parts.