Hi, Your video very helpful, But I have a question I am renting an apartment, and have the carrier wall unit. When I turn on my unit the vent opens and closes again, and no air comes out can you tell me why what I'm doing wrong.
Speculation based on mine, but if it stops with two dashes on the display it might be multiple splits going to the same outdoor unit on different modes. The same outdoor condenser can't do heat/cold at the same time. Or if they are on Auto Mode sometimes it decides one split is enough and puts the others to sleep, so yeah don't use Auto.
What does it mean "Whatever moisture that is left on the coil, will automatically be reintruduced?" How do we keep it cold but not allow too much moisture? Want to avoid mold
A normal air conditioner after it is satisfied, turns off the outdoor unit and the indoor unit. This allows the water that is condensed on the indoor evaporator coil to drain and leave the house. If the fan is left in high mode and not in Auto, the fan will never turn off after temperature satisfaction and will blow across your evaporator coil, evaporating all of the moisture back into your home causing high humidity and an environment conducive of foreign substance growth.
Unfortunately, this model does not have the easy to clean blower assembly. I recommend calling your Factory Authorized Carrier dealer for servicing the blower assembly on the comfort model
I have this in my airbnb in the state of FL and my guest tend to crank the ac to 62 degrees in the middle of a 90 degree day. Is there a way to lock the the control where the ac will not go below 7o degrees?
Unfortunately, the Carrier Comfort model does not have low or high temperature lockouts. You can lock the remote by simultaneously pressing the + and - buttons at the same time.
I do not recommend the fan being left in the "ON" mode during cooling mode for humidity reasons. If left in the "Auto" mode, the fan will ramp down allowing the water that is on the coil to drain. Otherwise if the fan is always on, this will keep the water from draining as quickly and evaporate back into the room. This is a recommended Florida "rule" since humidity is always high. This may differ depending on your location and climate.
Self Clean Mode Press “Self Clean” to activate or deactivate the self−cleaning function. Under this function, the air conditioner automatically cleans and dries the evaporator. The cleaning cycle takes 30 minutes, after which the unit turns off automatically. Pressing SLC on the middle of the cycle cancels the operation and turn off the unit. This function can be activated only on COOL or DRY mode.
Every 30 days normally, now if you have pets, high dust location (live on gravel rd), etc...then clean it more often. Clean filter=happy AC and low electric bills
thank you! so do you recommend using the timer on and off setting? or leave unit on all day? i heard if unit turns off when it turns back on it uses more energy then just leaving the unit on at all times? is this true?
Sounds like the coil and/or the drain pan is dirty and possibly overflowing. Take a shop vac in wet mode and suck the condensation drain where it exits outside to help free up the clog. There is a possibility of improper installation if the indoor high wall bracket was to level and causing the drain to back up.
I'm trying to learn that too. Watched another video that said to hold the temp button for three seconds but it didn't work for me . Try it tho and let me know If it works e you
Can you explain how to connect it to WiFi or get it set up on your phone? I see the WiFi symbol when it turns on
The follow button uses the thermostat in the remote instead of the thermostat in the unit
Thanks for the information
Hi, Your video very helpful, But I have a question I am renting an apartment, and have the carrier wall unit. When I turn on my unit the vent opens and closes again, and no air comes out can you tell me why what I'm doing wrong.
@@donnajackson4931 you possibly have a bad indoor circuit board. Consult your local carrier dealer for a technician to come out and properly diagnose.
@@donnajackson4931 also just try turning off the power at the breaker for a minute first
Did you ever figure it out? I’m having the same issue now
Speculation based on mine, but if it stops with two dashes on the display it might be multiple splits going to the same outdoor unit on different modes. The same outdoor condenser can't do heat/cold at the same time. Or if they are on Auto Mode sometimes it decides one split is enough and puts the others to sleep, so yeah don't use Auto.
How you change it from F to C
Hello, i know its been a year since you made this video but is there an easy way to open the cover panel ? I would be appreciated of any help. Thanks.
What does it mean "Whatever moisture that is left on the coil, will automatically be reintruduced?" How do we keep it cold but not allow too much moisture? Want to avoid mold
A normal air conditioner after it is satisfied, turns off the outdoor unit and the indoor unit. This allows the water that is condensed on the indoor evaporator coil to drain and leave the house. If the fan is left in high mode and not in Auto, the fan will never turn off after temperature satisfaction and will blow across your evaporator coil, evaporating all of the moisture back into your home causing high humidity and an environment conducive of foreign substance growth.
What is the function of the follow button if you do have the eye?
You can either have it set to blow the cold air where you are in the room or the opposite, to keep the air from directly hitting you
How do you adjust the back light. It only stays on for a second or two
what do you do if the on/off button does nothing
Possibly a bad remote
Hi. Does it turn off automatically when 72 degrees is reached when it's on heat mode? Thx!
The outdoor unit will ramp down if not turn fully off while the indoor unit will adjust speed automatically if in that setting
@@paulm850 I am confused...does it shut off when 72 is reached
The outdoor unit shuts off, the indoor fan will ramp down but not shut off so it can sense room temperature
@@paulm850 Awesome. Will just use heat mode then. Thx!!!!!!
Thank you so much
what is the follow button for? I thought it acts like a thermostat
Its if you bring the remote with you in another room the remote will act like your thermostat
Do you have to crack it open to clean the fan part?
Unfortunately, this model does not have the easy to clean blower assembly. I recommend calling your Factory Authorized Carrier dealer for servicing the blower assembly on the comfort model
How do you lock out the remote??????
What does EC mean I can’t get my unit to work
EC is an error code. Your authorized technician will be able to find the error code diagnostic information once an onsite visit has been performed.
Can anyone tell me what E-1 means? I called out a repair person , the units work in 2 rooms but one room it runs for 5 minutes then E-1 comes on. ???
I have this in my airbnb in the state of FL and my guest tend to crank the ac to 62 degrees in the middle of a 90 degree day. Is there a way to lock the the control where the ac will not go below 7o degrees?
Unfortunately, the Carrier Comfort model does not have low or high temperature lockouts. You can lock the remote by simultaneously pressing the + and - buttons at the same time.
Thank you for getting back to me. I wonder if I bought a 2nd remote and if it would work outside the window area.
There are wired wall thermostat options with abilities to lock out. Consult your nearest Factory Authorized Carrier Dealer
Why is fan mode not recommended? I have used it some for air flow ...
I do not recommend the fan being left in the "ON" mode during cooling mode for humidity reasons. If left in the "Auto" mode, the fan will ramp down allowing the water that is on the coil to drain. Otherwise if the fan is always on, this will keep the water from draining as quickly and evaporate back into the room. This is a recommended Florida "rule" since humidity is always high. This may differ depending on your location and climate.
What does the FP button do?
Freeze protection. When temperatures get below 40° outside, this helps certain parts from freezing and causing potential damage.
When heating run the fan on high ..
Wish I had purchased years ago
I keep clicking my clean self clean button and it won’t work
Self Clean Mode
Press “Self Clean” to activate or deactivate the self−cleaning
function. Under this function, the air conditioner automatically
cleans and dries the evaporator. The cleaning cycle takes 30
minutes, after which the unit turns off automatically. Pressing SLC
on the middle of the cycle cancels the operation and turn off the
unit. This function can be activated only on COOL or DRY
mode.
@@paulm850 I will try this. Thanks!
@@paulm850 where did you get this info? I couldn't find any info on their website. Thanks
Was the wife sweeping the floors the whole video? Haha
My unit looks the same I got the same remote but my filters are curved and there's 2 of them
Hi how often do you clean the filter?
Every 30 days normally, now if you have pets, high dust location (live on gravel rd), etc...then clean it more often. Clean filter=happy AC and low electric bills
thank you! so do you recommend using the timer on and off setting? or leave unit on all day? i heard if unit turns off when it turns back on it uses more energy then just leaving the unit on at all times? is this true?
I recommend leaving it on and only turn it up 3-4 degrees when you leave for work/extended periods.
@@paulm850 Thank you
My system makes gross stains down the wall…
Sounds like the coil and/or the drain pan is dirty and possibly overflowing. Take a shop vac in wet mode and suck the condensation drain where it exits outside to help free up the clog. There is a possibility of improper installation if the indoor high wall bracket was to level and causing the drain to back up.
@@paulm850 followed the video, my coils are actually super clean, the fan and surrounding area were all dirty with what looked like mold.
how to change Centigrade to Farenheit on the remote
I'm trying to learn that too. Watched another video that said to hold the temp button for three seconds but it didn't work for me . Try it tho and let me know
If it works e you
It works, press the temperature button for 3-5 seconds
I want to change my temp to metric but I don't have temperature button on my remote!
Not correct on certain modes
Hola se puede en español
Salve x sapere in italiano
Per sapere in italiano ti attacchi alla fodera del... E t'impari l'inglese 😂
Made by midea.
Designed by Carrier, manufactured by Midea. Carrier provides their controls for their Infinty models.
@@paulm850 oh I see.