ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- The remote that comes with your MR COOL DIY Ductless Mini Split helps control the indoor unit to your exact needs. This videos goes into depth about the features included with your MR COOL unit.
Check out our other videos about the MR COOL DIY Ductless Mini Split.
Unboxing:
• MRCOOL DIY Ductless Mi...
How to install:
• How to Install a MRCOO...
Why’s it so hard to tell when it’s on or off. Nothing changes on the display except a circle with a line through it.
Auto mode just serves the same purpose as "off." It does nothing no matter what temp it is set at.
hi, how often should i use the self clean function?? No info is given on that.
Video answered several questions. Thank you! Now, how do you know if the Clean button is working? It states in my book that the unit will go off after 30 minutes. Is there any other indication that Clean is actually working? Thank you.
This video didnt help me at all. Still not sure how to turn heat on it isnt nlowing hot air. Model remote ZHF/TY-01
same happening to myself, it worked from the beginning, now has no response at all for heat
you need an Inverter type unit for that to work , a simple AC wont do anything if you chose the HEAT option.
Thanks for the info. Have different brand but same remote.
Thanks so much for all of your setup and installation videos! They have been very helpful with our install of four DYI in our home !
Thank you I was stuck for a a bit with the temp part.
I have Carrier mini splits. Different 'badge' but same remote, design and layout.
Good night. What's the lowest can a windy ac go to my windy ac stuck at 17 Celsius an it's not that cool
Sorry, but I'm not sure what a 'windy ac' is?
how do you tell if it is working as cleaning? What mode I should set so self cleaning mode works??? Very frustrated as nothing indicated on the screen to to tell if is cleaning. And how long it takes to clean itself? Please please!!!
You can activate Self-Clean mode by pressing the button on the remote. It should last about 15 minutes and then shut off.
@@MrcoolComfort do I have to turn on the unit and put it on automatic mode to be able to activate self cleaning mode?
I just put in a brand new system and it's not running heat or cold I don't know if it needs a charge how much does this charge unit cost
My remote doesn't seem to be accurate with the temperature we set. We set it at 64 and closed the door to our bedroom and 3 hours later its 78 and still rising. Any one else know why this might be? I'm having trouble getting a hold of support. I've emailed, called and left a message, actually got thru and she couldn't answer this question so there suppose to call me back. Nothing yet. two units are close to the set temperature and the other two are way to high.
So follow me basically makes the remote a thermostat? What's the difference in putting it on 70°? I mean shouldn't it keep it 70?
What is the meaning of the E codes. I am getting a E3?? How can I speak to a human? There is no customer service phone number listed anywhere in the manuals or on the website. Help!!
Joseph Feldhaus looks the same as my Lennox. E3 is a fan speed error. Lennox had to replace a circuit board that was defective. Since mine was installed by a vendor, no out of pocket to me. Not sure about Mr Cool.
For the Timer off setting, do you mean that it shuts off after x amount of hours has reached? And by that I mean does the air con shut off after 10 hours (if that’s what I put) of you turning on the aircon?
Yes, that is correct.
No matter how many times I pressed the on/off button, the remote is always on but the ac just won't turn on. What gives?
Please call tech support at 270-366-0457.
Help the unit is on no timer is set and how do you get it to start?
Can you advise in more detail how the Self Clean mode is activated? I've clicked on the button but it doesn't do anything.
Self Clean is not necessarily a loud function. However, if it doesn't seem to be working at all, call us at 270-366-0457.
How do you set the timer to come on at 7pm and go off at 7am
Thanks a lot
Why the our remote control doesn't work? I can't turn off/on using the remote control but still have battery. What should I do? Thank
Please call tech support at 270-366-0457.
We are going on vacation. We don't understand how to program it to come on at 10 a.m. and go off at 7 p.m. everyday while we are gone. Can someone help me?
I would like to know too thanks
How do you reprogram the remote after you switch out the batteries?
You can press the "RESET" button to cancel all current settings.
Anyone know were the reset button is
I need help resetting mine too. Any luck on how to sync it back?
Hi.,... After setting upfor wifi, the WiFi logo is displayed on the unit, but the unit no longer responds to the remote. Is this normal?
Call tech support for the app at 425-529-5775.
How do i fix swing staying still and going down?
So, while the unit itself doesn't have a built in thermostat to monitor the room temperature, the remote does. So if I would like for it to cool to 74 and then turn off until it it's 75 again, then I just use the Follow Me feature and set it to 74?
You could do that, yes.
While using follow mode, does the remote controller infrared need to aim at the indoor unit?
I don't believe so. Obviously, it does need to be in reasonable proximity.
This video helped. Thanks.
I've had my unit for 3 weeks now and this week the Silence function ceased to put the system in silent mode. I also discovered today that I cannot change the fan speed, neither from the remote nor the Wi-fi app. The only function that works is turning the LED on and off. But the other functions not responding. Today I could not turn off the unit via Wi-fi. It would just show that it's "off" for a few seconds then turn back on. Turning off via the remote took several tries--I was almost going to turn it off at the breaker panel.
Normally the outside condenser is quiet, but today it was making a lot of noise as the fan was running at a high speed, even though it's only 70 and humid outside. I tried pressing Silence/FP button on remote, but it would not respond.
Not sure what's going on with this 3 week old unit.
Please call our tech support team at 270-366-0457.
Did you figure out what was wrong
Question: How long do I put the the self clean Mode for my AC ? mins? or hours?
It’s automatic. Usually last for 15mins
How can I reprogram the remote to a dedicated unit
Hello, I can't find "off" on my remote. Using the mode button, my choices are auto, cool, dry, heat and fan but no "off". Please help, thanks!
Use the On/Off button.
great job thank you. can you post a link to manual PDF version
Here is a link to the remote manual: mrcool.com/wp-content/dox_repo/mc-rmt-um-en-01.pdf
If you have the “Follow Me” function on and the remote is close to the indoor unit but behind a wall or grow room tent, will the indoor unit still be able to read the temperature from the remote?
There should not be any obstructions between the air handler and the remote when using Follow Me.
How can i reprogram the remote control for the unit can turn on or off . The remote i have is the same as the one in the video. Thank you
Please call tech support at 270-366-0457.
Hi there. Thank you for responding unfortunately the number you sent me is been disconnected, is there any other number I can call ?
I'm sorry, but that is our office number. It has not been disconnected.
Does unit work with a alternative control like trol master ?
We don't know what trol master is.
What do you do if the remote doesn’t send any signals to the actual ac
Check the batteries or call us for a new remote.
Will this remote work with a blueridge unite ?
Maybe? We've never tested it, so we couldn't say. We certainly don't support our remote function with other products.
thank you!
You're welcome!
Is possible to swing?
How can change it to Fahrenheit from Celsius? It’s driving me crazy!
On the Temp button in the center of the remote, press and hold Up and Down buttons together for 3 seconds to alternate the display between Celsius and Fahrenheit.
@@MrcoolComfort thank you it doesn’t work tho. Not sure what the problem is.
@@MrcoolComfort Worked for me, thank you!
In the "Follow Me" mode, does the remote have to be insight of the wall mounted unit?
Does it use RF to communicate or does it use a LED optical communication?
Yes, it will need to be in sight of the air handler.
very helpful
Looks just like an OLMO, are you sister companies?
Not as far as we know.
Excuse me but how do you reset the settingd
How long it takes to clean ? And it will atomically will come back to normal mood
Self Clean mode length can vary. The unit will turn off when the cycle is complete.
How can I program it to come on 8 pm and off at 7 am I don’t have wi -fi yet in my home
The basic remote does not have a setting that will enable you to program specific time points. However, you can use the Timer On/Off Buttons to turn on or off according to a number of 30 minute increments you program.
Condensation pan inside unit, how/what to do to access, to for check proper drainage?
If water is coming out of the condensate drain, it is draining properly. If not, there is a problem. Call us at 270-366-0457 for tech support.
@@MrcoolComfort 12703660547
I have 24k diy unit. After I installed it, the indoor unit drain was draining water. After a few days of operation, no water coming through the inside unit drain, however there seems to be an excessive amount of water draining from the outside condenser. Anything I can check? Is this normal operation?
What does the auto mode do on the left?
In the Auto mode, the air conditioner can logically choose the mode Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the set temperature on the remote control.
Is there anyway to lock the temperature?
I'm not sure what you mean.
@@MrcoolComfort is there a way to set the temperature and lock it so it can’t be changed?
The remote does not have that kind of functionality.
What if the remote control won't turn off and just restarts itself while AC doesn't recognize it.
Contact tech support at 270-366-0457.
In auto mode, how do I set max/ min temp?
Press the MODE button to select Auto. Use the Up/Down button to set the desired temperature range. Then press the On/Off button to start the air conditioner.
In auto mode it allows me to select a number but not a range. Will the unit keep alternating between heat and cool to maintain the temperature I selected? It seems like I should be able to select a range, say 68 to 80 and the heat would go on below 68 and the cool above 80. Is this not possible?
Unfortunately, what you describe is not possible.
How can I determine the actual temperature in the room. Does it show on the remote? Thanks
When the unit is ON, press FOLLOW and the temperature will display on the remote LCD. Bear in mind that the temperature showing is for wherever the remote is and not necessarily the room temperature.
How to lock the remote from kids.
close captions would be helpful
Sleep icon ؟
My Mr. cool 18,000 heater intermittently shuts off is that normal????
Can you give me more details about what you're seeing?
@@MrcoolComfort Is there a way to send you a short video so you can hear how my unit sounds I and then you could give me your opinion as to whether it is normal sounding or not
You could. Or you could call tech support at 270-366-0457 and let one of our techs hear it over your phone.
@@MrcoolComfort I took a little video and sent it to Patrick McIntyre he told me to check to see if anything is hitting the fan and if the valves are open. I emailed him back that I will check tomorrow morning Saturday to see if anything is hitting the fan but I asked him to explain to me what he means about the valves he hasn’t gotten back to me yet can you please tell me what to do I’m not very handy but thank you
I'm not sure what he means, but I'll forward your message to him.
How do you change from Celsius to degrees?
Press the middle of the Temp button for 3 seconds.
She said that you hold the temp set for 3 sec
Its not working. Help
Why is it that the Direct button won’t control the louvre all of the time?
I don't understand exactly what you're asking. Are there times of day that the remote does not function properly?
MRCOOL
The Direct button on the remote that controls the Horizontal Louvre.
The louvre doesn’t always want to move when Direct is pushed.
@@rotaxrider you might be out of range or try pointing the remote at the unit itself. I noticed mine wouldnt work unless I did that.
What are some test to verify that the unit is performing properly? I just want to make sure I have everything connected properly and it's working right.
If the unit is cooling and heating and you aren't getting error codes, then it is working properly.
@@MrcoolComfort thank you for the quick reply. I will not use the Linequard cover. Is there anything beyond the supplied wrap tape required to protect the line-set from the elements?
Required? No, but the more you can protect any part of an HVAC system, the better.
Is this an infrared remote
I have the oasis unit
Yes, it is.
how do i put my mr cool on outo to shut off and on
Do you mean to shut off and on at certain times or at certain set temperatures?
@@MrcoolComfort yes
a certain text temperature
i mean temp
The compressor will cease function once it reaches the set temperature. However, the fan runs constantly to ensure a pleasant environment.
Est-ce possible d avoir les explications en français merci
Je m'excuse. Je ne parle pas francais. Je vais essayer d'utiliser Google translate. Nos manuels sont en français. Comment puis-je aider?
HELP!!!! It just keeps running and never turns off!!! How do i turn it off when it reaches desired temperature??
The fan never shuts off, but the compressor does. So the fan always blowing is normal.
Diy ductless mini split heat no longer working, any thoughts?
We recommend you contact our tech support team at 270-366-0457.
DIY mini split
I just installed this in a rental unit and I have a couple questions for anyone who might know or for the folks from Mrcool.
What is the best way to program the unit to heat to a certain temperature during the day and evening from 8:00 AM to 11:30 PM such as 70 degrees and then lower to 62 degrees from 12:00 AM to 8:00 AM for sleeping?
Could I program two timers for each of the two time periods with different temperatures for each timer? Can you use two timers at once like that?
Or is there a better way to do this?
If I set the temperature to a certain amount like 70 degrees will it keep the room 70 degrees? I read om your youtube page the unit itself does not have a thermostat so the only way to monitor the room temperature is to use the follow me feature to set the temperature?
Is that really the only way to set the unit to heat until a set temperature, stop heating when it reaches the temperature and then go on again to maintain that temperature as needed?
Can u elaborate the function of silence fp button? What's it for and how it works?
Vary good friends
Once the temperature is achieved when (if ever) does the fan shut off?..................Answer: It never shuts off. How about that? Time for me to build an interface for this unit with a conventional digital stat &/ or a WIFI command /control making a 'button presser' for the existing remote (i.e. to control this unit like a conventional central HVAC System). (Yes, I 've done similar years ago).
How to remove AC fan ? Please tell me
I cant take fan mode😭
Mr cool 18k18k unit
Thank, i enjoy watching you, you are definitely beautiful
What’s he name on Onlyfans?
Fans Only