I had this job done n July, carbon cleaning, new oem injectors and water pump, pcv unit, fuel filter and intake manifold. My mechanic had a little trouble with the water pump bolt holding it n had to get a new one, everything was oem vw totally worth it runs great. I wish you would of done a new intake manifold, that's what started my whole process of getting this done. Good video, but this is not a beginners job.
I have the ccta engine and I just got my new aluminum water pump, now, I’m not sure if I want to use the plastic hose that connects the water pump to the cylinder head coolant flange
Go to ecs tuning’s website when you look for the waterpump kit there will be a disclaimer on which ever one you click on saying whether its for cbfa or ccta. Also the cbfa one is the one witth the sensor at the bottom
Get all gaskets intake manifold, throttle body and injectors o ring kits you need 4 of them. Also get new water pump gasket and union with new o rings for the water pump hoses I believe there are two big o rings for the big hoses and 2 small ones on the union. Also about 3 gallons of coolant.
Cheapest one I could find on ebay, I reused the oem one though. Buying the whole cheap manifold that came with the gasket was cheaper then just buying the gasket
One more video that fails to actually show how to put the new belt on the cog! Not a single video on youtube shows how to get the bloody thing on again!
@@Matt_Pie actually, it's not! I found one video online that shows the (Right) way to do this, and it only takes about 5 minutes and is crazy simple! Leave it to a Mexican to know how to do it right, and Show the world the correct way to boot!
i just wrote this long ass comment but it got deleted but anyways bro what i said is that it’s not worth keeping ur old intake manifold because it’s a common failure … they have many ways that they can fail and the new one u have is the revised one that addressed all the failure points which were PLENTY i will link a video i recomend u see it. th-cam.com/video/Z2VoJp2yryU/w-d-xo.html that being said. if u wanna save money and maximize it then you should use the old intake manifold as long as it works fine but if it doesn’t it’s worth replacing it bro.
The intake manifold i bought was super cheap and not oem I bought it because it came with the gaskets I need and was cheaper then the other gaskets listed. I cleaned the carbon off of the manifold if the diaphragm fails I have a spare on that new intake manifold
@@Matt_Pie when u say cheaper do u mean 50 bucks cheap or 200 bucks cheap? cuz the one from vw is 200 bucks or so and it’s like the newer version of the preexisting intake manifold that commonly failed. i had mine replaced because the intake runner flaps failed and the replacement one is better and just is smoother than the older one bro anyways lock the content keep it up 👍
Thanks man! And I mean the intake was a chinese knock off that was literally 40 bucks with gaskets 😂 one intake manifold gasket was the same price so I just bought that shitty intake
I had this job done n July, carbon cleaning, new oem injectors and water pump, pcv unit, fuel filter and intake manifold. My mechanic had a little trouble with the water pump bolt holding it n had to get a new one, everything was oem vw totally worth it runs great. I wish you would of done a new intake manifold, that's what started my whole process of getting this done. Good video, but this is not a beginners job.
If my intake manifold fails im going to try to replace the diaphragm instead of the whole thing
I went through the same issue with water pump. I feel your pain.
I have the ccta engine and I just got my new aluminum water pump, now, I’m not sure if I want to use the plastic hose that connects the water pump to the cylinder head coolant flange
where did you buy the injectors?
thank you for the video, it is very helpful
what’s the name of the water pump bro
I,m just change waterpum and then got problem with break senser padle
Ooof the frustration in your voice lol
Yeah :(
Hey, so my water pump is going out and I have the cbfa engine like you witch water pump is the correct one to get?
Go to ecs tuning’s website when you look for the waterpump kit there will be a disclaimer on which ever one you click on saying whether its for cbfa or ccta. Also the cbfa one is the one witth the sensor at the bottom
Did the old thermostat housing not fit on the aluminum one ? I have an aluminum water pump and I believe my car is also CBFA
If your car has a “D” in the fifth digit of the vin, it is a cbfa
Do you remember if the water pump hoses have gaskets in them?
This is crazy . I have to do this same exact job. Carbon cleaning , manifold , and water pump. If you can please go a little more in depth
Watch the tutorials I linked in this video and the last those helped me out lemme know if you have any questions
Get all gaskets intake manifold, throttle body and injectors o ring kits you need 4 of them. Also get new water pump gasket and union with new o rings for the water pump hoses I believe there are two big o rings for the big hoses and 2 small ones on the union. Also about 3 gallons of coolant.
Also forgot the water pump belt. You need to hold crank clockwise while going counterclockwise to loosen bolt holding belt In place
@@Matt_Pie Do you have the link for the aluminum waterpump?
It’s on fcpeuros website, aluminum waterpump is ccta only
Yo did you take the whole front end apart just to do the water pump?
no i also did a carbon clean it was going to be a multi day process and I never did it before so yeah I tore the whole front apart
How did you get that damn belt off?
I need to change mine also, how do I know which one I need?
www.vwvortex.com/threads/cbfa-or-ccta-engine-codes.5617346/#post-76363345
Which intake manifold did you get? Mine needs to be replaced.
Cheapest one I could find on ebay, I reused the oem one though. Buying the whole cheap manifold that came with the gasket was cheaper then just buying the gasket
hey bro i have the same issue with my water pump where can i get the OEM water pump ?
Ecs tunings website tells you cbfa vs ccta
@@Matt_Pie thanks mate !!
Yo I have a little octopus in my window too 😂🙏
One more video that fails to actually show how to put the new belt on the cog! Not a single video on youtube shows how to get the bloody thing on again!
I had to walk it on while someone else turned the motor over its a pain in the ass
@@Matt_Pie actually, it's not! I found one video online that shows the (Right) way to do this, and it only takes about 5 minutes and is crazy simple! Leave it to a Mexican to know how to do it right, and Show the world the correct way to boot!
@@ehrashkae6343lol racist. He didn’t show how to take it off tho!
i just wrote this long ass comment but it got deleted but anyways bro what i said is that it’s not worth keeping ur old intake manifold because it’s a common failure … they have many ways that they can fail and the new one u have is the revised one that addressed all the failure points which were PLENTY i will link a video i recomend u see it. th-cam.com/video/Z2VoJp2yryU/w-d-xo.html
that being said. if u wanna save money and maximize it then you should use the old intake manifold as long as it works fine but if it doesn’t it’s worth replacing it bro.
The intake manifold i bought was super cheap and not oem I bought it because it came with the gaskets I need and was cheaper then the other gaskets listed. I cleaned the carbon off of the manifold if the diaphragm fails I have a spare on that new intake manifold
@@Matt_Pie when u say cheaper do u mean 50 bucks cheap or 200 bucks cheap? cuz the one from vw is 200 bucks or so and it’s like the newer version of the preexisting intake manifold that commonly failed. i had mine replaced because the intake runner flaps failed and the replacement one is better and just is smoother than the older one bro anyways lock the content keep it up 👍
Thanks man! And I mean the intake was a chinese knock off that was literally 40 bucks with gaskets 😂 one intake manifold gasket was the same price so I just bought that shitty intake
That's too much work
I have no money but I did learn a lot doing it myself
Nah this is nothing. Try working on BMW turbos
@@Matt_Pie yeah bro, trust. I'm broke too so i do all my work. Unless I can't figure it out.
@@Captain_Brown_Beard lol working on a bmw?
@@MK6CHRIS Yeah I find this GTI much easier than my BMW was. Parts are a lot cheaper too!
Worthless video for water pump install
Did you read the title its a vlog
@@Matt_Pieis it really? We never even saw what u look like lol