I noticed on my car that the plastic clip holding the sensor wire to the brake hose is loose when clipped on to the rubber part, but is snug when you clip it onto the metal crimp part just below. This might help it from falling off as seems to have happened in this case. Good work though and thanks for the video.
The dealer pinched one of these during warranty service on the wheel bearing. I returned to the dealer to have the issue fixed. I later found that they did not replace the pinched cable, just pulled it out of where it was pinched and told me it was good..no tape or heat shrink…no nothing. Just one more reason to DIY !
Awesome. Need to do this to the e30 😶🌫️
+@polloloci21 😎🍻
Great job!! I learned a lot from your video for x4 m40i
+박현진 🙏
I noticed on my car that the plastic clip holding the sensor wire to the brake hose is loose when clipped on to the rubber part, but is snug when you clip it onto the metal crimp part just below. This might help it from falling off as seems to have happened in this case. Good work though and thanks for the video.
+SławomirJ thanks! 🍻
My sensor broke off and wire was just hanging so I replaced the whole part but I just spent a whole hour trying to get it to fit back it the slot.
+@lukeluke281 glad you got it fixed! 🍻
The dealer pinched one of these during warranty service on the wheel bearing. I returned to the dealer to have the issue fixed. I later found that they did not replace the pinched cable, just pulled it out of where it was pinched and told me it was good..no tape or heat shrink…no nothing. Just one more reason to DIY !
+Bob Fognozzle exactly!!!
You forgot to put the blocks in the jacking pods, you’ll eventually break it without the blocks to put in the pods
Maybe, but I’ve never used anything else and never had a problem
@@HelpMeDIY I cracked one not using the insert, when I got new tires they left 4 of them in, so I just left them.