I tell you what fella , without this video I would have been screwed , no assembly instructions from Howdens In the draw pack , pretty P**S poor from HOWDENS ! You however Legend ! Thanks for getting me over the winning line 👍😀😅
Mate! You saved my sanity. Opened up the box and couldn't believe that there were no instructions. Sat there for ages trying to work it out. Then I watched video. Thanks so much
Got almost identical pan drawerbox from wickes and the instructions for the runners are almost non existent. Thanks for this video which amswered all my questions.
Unpacked the drawers this afternoon and thought I would need a degree to assemble. It said consult the Howden's kitchen assembly guide. Which I don't have!! Absolute lifesaver. Thank you.
Excellent, many thanks for posting this as it told me how to resolve the problem when your fitter used the short screws to put on the drawer fronts. We went in to Howdens but all they could offer was more parts.
Excellent I followed your step by step guide video with no problems, as one as already commented Howdens paper instructions were next to useless your a life saver I can't thank you enough.
Front panel just came off a drawer in my kitchen. Just watched this and realised my kitchen fitters didn't put the drawer together properly. I also believe the _reason_ the front panel came away was because they used the shorter screws. Not quite sure what to do ATM. Seriously looking at Araldite to repair the chipboard and re-make a pilot hole. Thank you for showing me how to get it apart and how to put it together properly. Edit: of the 4 screws on the front panel, 3 of then were the short type. As it was a _repair,_ I decided to use 3.5 x 20mm screws, and as (obviously) the screws in my kitchen are all over the place, I got a box of 200!
this just happened to us, we used some 2 part wood filler in the holes, re-screwed the bracket on and allowed 30 mins for it to set before re-attaching it to the drawer
Good stuff, but in the intro it says you will show us how to adjust...I guess you showed us which screws on the mnechism do it, but I would have like to see it in action. I shall go downstairs now and experment for myself...
Thanks fella, i just got the Howdens kitchen, having loads of problems with the oven tower, which has the door up top and draw on the bottom., had to drill loads of holes so the 2 AEG ovens fit, what a load of rubbish it is, i really regret my purchase from this company, wish i went to Magnets now... £7000 wasted on units only!
Thanks for the video. Very helpful. However, if you have a 2 pan drawer and the bottom drawer is not seeming to level up with the cabinet- can you please advise? Do we need to make our own holes for the door fronts for example? Thanks in advance
Hi, Thank you for sharing this video and tips. You mention at 3:14 on video you have had problems with base not fitting true in the metal brackets…I have two deep pan drawers where each of the base panels overhang the metal rail by exactly the same ~1.5mm? I can see on your video that the base board fits exactly true to the end of the rail. This 1.5mm overhang pushes the bottom of the drawer front out at the bottom. And it is far too small to trim off. Can you tell me how you corrected your misfit base board, please? Our drawers are made up with the misfit baseboard but it does not look right. Thanks, Carol
2 of mine are stopping on the return about 1cm out. The soft close seems to only take them that far and then I have to push the rest in. Any ideas why? Is the mechanism too stiff and will loosen?
Lifesaver mate - I was trying to figure out how to raise the plinth drawers to take account of new flooring - saved me a right hassle! Ta!
Life saver. Kitchen fitter had put tiny screws in the door mounts all fell apart. Needed to know how to strip them down. Great video 👏🏼
Thank you so much.
Removing the front panel was - I don’t get it - the screwdriver turn - BRILLIANT 😊
I tell you what fella , without this video I would have been screwed , no assembly instructions from Howdens In the draw pack , pretty P**S poor from HOWDENS ! You however Legend ! Thanks for getting me over the winning line 👍😀😅
Thanks Ram. This is everything that’s missing from the Howdens manual!
Mate! You saved my sanity. Opened up the box and couldn't believe that there were no instructions. Sat there for ages trying to work it out. Then I watched video. Thanks so much
Got almost identical pan drawerbox from wickes and the instructions for the runners are almost non existent. Thanks for this video which amswered all my questions.
3 years on and still no instructions big thank you
Cheers ram
Pulled me out of a hole there 👍🏼
Unpacked the drawers this afternoon and thought I would need a degree to assemble. It said consult the Howden's kitchen assembly guide. Which I don't have!! Absolute lifesaver. Thank you.
Excellent, many thanks for posting this as it told me how to resolve the problem when your fitter used the short screws to put on the drawer fronts. We went in to Howdens but all they could offer was more parts.
Excellent I followed your step by step guide video with no problems, as one as already commented Howdens paper instructions were next to useless your a life saver I can't thank you enough.
This was so helpful, thank you.
Thank you soooo much. I was clueless and stressed. But this well documented video is perfect. Thanks again.
Thanks so much for taking the time to do this. I'm doing internal drawers but guessing it's quite similar. Cheers
You are a star! Great video, saved my bacon. I cannot tell you how useful this was for me. A million thanks.
Great video. Really helped me with assembly. Thanks.
thank you sooooo much for your video ! I was completely lost ! ^^
Thank you for sharing, priceless to help us put the cutlery drawer front back on :)
You are an absolute star, thank you so much for posting this!! 👍
Front panel just came off a drawer in my kitchen. Just watched this and realised my kitchen fitters didn't put the drawer together properly. I also believe the _reason_ the front panel came away was because they used the shorter screws. Not quite sure what to do ATM. Seriously looking at Araldite to repair the chipboard and re-make a pilot hole. Thank you for showing me how to get it apart and how to put it together properly.
Edit: of the 4 screws on the front panel, 3 of then were the short type. As it was a _repair,_ I decided to use 3.5 x 20mm screws, and as (obviously) the screws in my kitchen are all over the place, I got a box of 200!
this just happened to us, we used some 2 part wood filler in the holes, re-screwed the bracket on and allowed 30 mins for it to set before re-attaching it to the drawer
Tidy work. Nice job. Clear demo and well presented.
Absolute life saver mate!! Saved me a load of stress.....beer time now 👍🏻🍻
brilliant - just what i needed. thank you
Good , really help ful video thank you
Great explanation!!! Thanks, helped me out.
Nice one mate!
Good stuff, but in the intro it says you will show us how to adjust...I guess you showed us which screws on the mnechism do it, but I would have like to see it in action. I shall go downstairs now and experment for myself...
Cheers.... Excellent
Thanks fella, i just got the Howdens kitchen, having loads of problems with the oven tower, which has the door up top and draw on the bottom., had to drill loads of holes so the 2 AEG ovens fit, what a load of rubbish it is, i really regret my purchase from this company, wish i went to Magnets now... £7000 wasted on units only!
Excellent video, thanks
Top Man..!!
Howdens are shocking no instructions random bag of screws
Really helpful. Cheers
Thanks for the video. Very helpful. However, if you have a 2 pan drawer and the bottom drawer is not seeming to level up with the cabinet- can you please advise? Do we need to make our own holes for the door fronts for example? Thanks in advance
Good one mate
Hi, Thank you for sharing this video and tips. You mention at 3:14 on video you have had problems with base not fitting true in the metal brackets…I have two deep pan drawers where each of the base panels overhang the metal rail by exactly the same ~1.5mm? I can see on your video that the base board fits exactly true to the end of the rail.
This 1.5mm overhang pushes the bottom of the drawer front out at the bottom. And it is far too small to trim off. Can you tell me how you corrected your misfit base board, please? Our drawers are made up with the misfit baseboard but it does not look right.
Thanks, Carol
2 of mine are stopping on the return about 1cm out. The soft close seems to only take them that far and then I have to push the rest in.
Any ideas why? Is the mechanism too stiff and will loosen?
15:33 what do you call that part that clips in? it's broken and i cant find it anywhere : (
How do you take the clip out when the doors are loose? Ducking impossible.
Great vid, but how do you remove the drawer from the runners.
Did you manage to find out? Could do with knowing myself!
How do you take the clips out it it’s wrong
I subscribe you channel..
Anyone else at work? 🤣
DRAWERS!
I've installed these but the drawers are really stiff coming out, why is that?
Runners may not be level or parallel to each other... Maybe
Trying to find video for 500 mm recycling bin. Any one know if there is one. Can't follow the instructions. They are useless