These videos are so satisfying. No annoying talk or music (I turn the volume almost all the way down). Just the perfect blend of precision and practicality. Seeing his use of all the tools he’s created is also great.
This is a fairly simple but effective solution, well planned and implemented, and relatively easy to reproduce - as always seen in your videos. At least a thousand thumbs up for sharing your knowledge and creative spirit with us.
@@P_Matveev In truth, I've just seen an American video made as you say, but he had to strengthen the lid that didn't support the inlet and outlet pipes, and in tests with filter clippings dust entered in the main aspirator, too much
What a refreshing change to see an instructive video without annoying music. Everything is so clearly shown that a commentary is not necessary. If anyone can't follow the video then they certainly shouldn't be attempting diy🤔
I rather like this particular dust collector. It's a very simple, yet effective principle. Thank you for sharing this. Well done. Now I can build dust collectors for each of my tool stations.
you could have just said, "I have always liked cyclones in principle, but I never thought I would see a DIY one work so well. That is amazing efficiency!"
@@bermchasin⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
By your use of materials. I figured that you used those cheap materials simply because this was a prototype. But looking at the results. Your prototyping phase is over, put this into production. This works better than any Cyclone system I've ever seen not a single Speck got into the vacuum. I think Harvey would be jealous because even their machine has to be vacuumed out after each use and they put thousands of dollars of Technology into their machine that you were able to reproduce better results with a piece of mesh oh, a few pieces of plywood, some connectors, and essentially a bucket LOL. Way2go. Absolutely love this.
Amazing video. But can someone explain this to me, please? I understand the constructed screen cylinder on top will allow the air and the fine dust to leave the collector and the heavier remnants to fall to the bottom bucket. But wouldn't the intake from the suction hose next to the metal screen allow larger chips and dust to go through the screen right away without settling? I mean the dust and chips that can fit through that screen size which appears to be larger than say window screen. I would think maybe only have the back half of the metal cylinder a screen so when the intake hose blasts against the insert it would divert more away to settle.
@@jisakukobo Thank you for answering, I perhaps worded it badly. I meant for particles that could normally pass through, but if given time to settle or aimed away, they would gather in the bucket instead of the vacuum. I now also realize that even if it does work that way it would probably only save a little space in the shop-vac.
First off, I agree that’s a nice dust collection system. Well done. What I can’t believe is, there was ever that much dust on the floor. EVER! He must have driven 10 miles to find that much. Hahaha. Again well done.
Excelente proyecto muy bien desarrollado y mejor ejecutado , un ciclón magnífico , como quien dice a partir de dos botes , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
Hola. Estoy tomando el clase de español en mi escuela. Yo siempre estoy buscando practicar y improver mi vocabulario y comprensión de la idioma. Por favor, ¿que quiso decir con la frase "como quien dice a partir de dos botes" usted?
@@samp-w7439 Que la base principal del proyecto , son dos botes o latas o cubos cómo les quieras llamar , espero haber aclarado tus dudas , un cordial saludo.
Very nice take on the bucket cyclone! I suspect that your intake on the bucket will be the weak spot - where the short white flexible hose goes in and is attached with putty. A more durable solution might be to have a rigid intake and "cast" it in place with liquid epoxy or a bit of fiberglass. Only very light dust will make it to the vacuum cleaner, but over time it will clog up the filter. If you can get cheap disposable bags for the vacuum, they will save some time on shaking and blowing out the filter. A smaller (faster) secondary cyclone will remove more fine dust and prevent it reaching the vacuum, but at the cost of some airflow. A secondary cyclone could even fit inside the top bucket... Beautifully made altogether.
Very interesting design and impressive results. One mention, if I may, at Time 1:40 When I have a shape like that to cut out, I use two different hole saws; obviously the larger one at one end and a smaller one at the other end. Then just use a jig saw, or whatever one has available, to cut between the holes; seems to save time.
Use your dremel cutting disc (or buy one - usually they are included) to cut out those shapes in metal instead of drilling 30 holes, cutting out remnants, then grinding the edge clean with the dremel anyway . . . great cyclone build though.
Thank you very much. You are competent in what you do and I am very proud of you for being the best artists in the field. Best regards from Aden Yemen.
Достойно!!! Вот только вопрос, а если вход в циклон сделать ниже отсекателя из сетки не будет эффективность выше? По идее ведь мелкую легкую фракцию может затащить на входе...
I have made it few months ago but my 1500W vacuum cleaner caused radial implosion of the metal barrels I used. Definitelly a barrels with stronger metal sheet is needed.
Hi, i love your job, it’s so satisfying! I would like to know where you buy the circular accessories in aluminum for the Makita triming machine please ? Have a good day
( Es ) Un ciclón nunca te quitará el polvo fino . Sólo sustituye a la bolsa de filtro . Donde quedan las partículas que pueda filtrar .( un ahorro en bolsas ) El polvo fino , que no ves , tendrá que ser filtrado por el BUEN filtro de la aspiradora . ( HEPA ) De lo contrario ... lo respirarás. 👍👏
Nuevamente gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Francisco gamez un abrazo muy fuerte y saludos bendiciones para usted y toda su familia es usted genial 😀👍👍👍👍👍👍👍👍👍👍
Now add an internal bag to your vacuum. It will keep that filter clean indefinately and keep the suction near peak for much longer. Plus its a cheaper than a filter if you happen to overfill your collector and pull debris into the vacuum.
@@dsaurabh13 it blocks debris with very little weight but larger surface area from entering the other tube(source of the vacuum). Things like small plastic bags or leaves that won't tumble and flow along the outside edge and settle to the bottom.
Very good job, I wanted to make one but for the ash that sticks a lot to the filter and I wanted to know if your design could work with stove ash. thank you.
What are the 4 metal inserts installed on the bottom side of the lower round wooden piece for? I didn't see the purpose of these. Someone please tell me. Some measurements would be nice also.
Great video! Always a pleasure to follow you - not only the actual project but also the way you handle it! There are so many tricks shown any starter can take a lot out for his projects! On top of the content I love as well the way you put it into the video; never boring and always showing the right level of detail! Thanks a lot for taking the efforts to share your experiences and also thanks for the perfect way of presentation Continue like that ! Best regards Herry Scholer
Скажите пожалуйста как Вы сделали наклейку в виде капли, по которой нанесли разметку на ведро и после высверлили отверстия? Как вы её расчитали? Мне очень понравилось ваше видео❤ респект
I love the design, but don't understand the purpose of the recessed washers in the top plywood end of the separation cage. Can someone explain their purpose?
Hi, have You tried it with some very fine dust, like from drywall sander? i'm on a verge of some renovation work in my house, and thinking cheap vacuum with such cyclone dust collector vs pricier vacuum with filter cleaner system, got any thoughts on that? thanks in advance! M.
Congratulation Dear Mr EXPERT OF DIY! Thanks to You regarding your several video, very clear smart sessions. Best price cheap than dust paper bag for the vacuum cleaner!
Im sorry sir but as a beginner I didn't understand how you put in the filter you made hang upside down without falling? . Is there a magnet you put in or ? Did i miss something?
Thanks for this video, really nice build. I would like to know what size the holes on the mesh are? as I'm planning to try this build. Its the most effektive diy cyclone I'v seen and the simplest build 👍 Also what hight is it all together? I'm guessing that the hight has to be just right, for this design to work effectively?
Drogi kolego jakie są wymiary siatki mam na myśli średnicę oczka, rozstaw oczek i grubość blachy. Super projekt. Przy okazji ile litrów mają wiadra? Pozdrawiam z Polski
What type of epoxy is it that you are using to bond the wood and steel? Where I live where have tubes of 2 part epoxy, but it is very expensive so was wondering what it is you are using because you are using it quite often. Nice work!
За место сетки надо взять автомобильный фильтр - это раз! Индикации заполнения нет и при наборе полностью, как вы разберете эти два ведра - это два!(как минимум одно ведро высыпиться рядом)
Nice build, those things separate really good but are somewhat costly when it comes to static pressure since the container will snatch pretty much all of it.
@@shaman935 Yea, you will loose about 80-90% of the static pressure when using a typical china cyclone. This sort of separator is a bit better, but most baffle builds will remove at least 70% or more. This is fine as long as you don't plan to vacuum any heavy particles, having long hoses or downsizing the hose to much.
@@shaman935 I have one connected to my saw and it seems fine. The pressure drops a lot more drastically from clogged filters without it! I suppose it depends how disciplined you are about emptying out shop vacs and cleaning filters though. You can make a simple one in about 20 minutes from a large plastic bucket if you want to test. The inner mesh cylinder is unnecessary, you just need a baffle to separate the dust collection from the cyclone. There's approximately a billion tutorials on yt for how to do it.
@@stevem815 Many thanks for that info! Seems like possibly another good example of 80/20, or optimal combination of effort/ cost/ performance. Hope you're having a great T-day!
I would be happy if you could share my video on your SNS.
Это лучший самодельный циклонный фильтр, который я видел, спасибо.
One of the best, simple and effective cyclone filterless dust collecter.
Well done.
These videos are so satisfying. No annoying talk or music (I turn the volume almost all the way down). Just the perfect blend of precision and practicality. Seeing his use of all the tools he’s created is also great.
This is a fairly simple but effective solution, well planned and implemented, and relatively easy to reproduce -
as always seen in your videos.
At least a thousand thumbs up for sharing your knowledge and creative spirit with us.
Это усложненное, не эффективное решение. Можно было обойтись одной бочкой, двумя патрубками и двумя дырками в крышке.
@@P_Matveev In truth, I've just seen an American video made as you say, but he had to strengthen the lid that didn't support the inlet and outlet pipes, and in tests with filter clippings dust entered in the main aspirator, too much
What a refreshing change to see an instructive video without annoying music. Everything is so clearly shown that a commentary is not necessary. If anyone can't follow the video then they certainly shouldn't be attempting diy🤔
I rather like this particular dust collector. It's a very simple, yet effective principle. Thank you for sharing this. Well done. Now I can build dust collectors for each of my tool stations.
From the imagination to the execution, this is perhaps the best thing I’ve ever seen made on TH-cam. Improvised yet supreme quality. Outstanding!!
As an engineer I have always liked cyclones in principle, but I never thought I would see a DIY one work so well. That is amazing efficiency!
you could have just said, "I have always liked cyclones in principle, but I never thought I would see a DIY one work so well. That is amazing efficiency!"
@@bermchasin I could have!
@@irollI like that you liked them as an engineer.
@@bermchasin⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
By your use of materials. I figured that you used those cheap materials simply because this was a prototype. But looking at the results. Your prototyping phase is over, put this into production. This works better than any Cyclone system I've ever seen not a single Speck got into the vacuum. I think Harvey would be jealous because even their machine has to be vacuumed out after each use and they put thousands of dollars of Technology into their machine that you were able to reproduce better results with a piece of mesh oh, a few pieces of plywood, some connectors, and essentially a bucket LOL. Way2go. Absolutely love this.
Thank you for having a straight forward title instead of something stupid and generic like "the best use for an old pail"
Where do find pink/lavender buckets?
Cudos sir, great build and you've taught me the metal snap ring will join two barrels/ cannisters together. I had never realised that!
They are no longer the average in the states- everything is plastuck
Your joking?
@@bobbg9041 Nope! I never realised that one seal ring would hold 2 cannisters together!....learn something new everyday!
@@keithholdsworth4125 Same, we have many of those kegs where I work, handled them hundreds of times, never knew
I am not surprised that the inside of his vacuum is spotless. Awesome work as always.
Amazing video. But can someone explain this to me, please?
I understand the constructed screen cylinder on top will allow the air and the fine dust to leave the collector and the heavier remnants to fall to the bottom bucket. But wouldn't the intake from the suction hose next to the metal screen allow larger chips and dust to go through the screen right away without settling? I mean the dust and chips that can fit through that screen size which appears to be larger than say window screen.
I would think maybe only have the back half of the metal cylinder a screen so when the intake hose blasts against the insert it would divert more away to settle.
Of course powder-like garbage passes through.
No centrifugation is perfect.
Even Dyson's filters aren't permanent.
@@jisakukobo Thank you for answering, I perhaps worded it badly. I meant for particles that could normally pass through, but if given time to settle or aimed away, they would gather in the bucket instead of the vacuum.
I now also realize that even if it does work that way it would probably only save a little space in the shop-vac.
Another meditative video. Flawlessly built dust extractor. I feel like I should watch one of your videos daily. Food for the soul.
First off, I agree that’s a nice dust collection system. Well done. What I can’t believe is, there was ever that much dust on the floor. EVER! He must have driven 10 miles to find that much. Hahaha. Again well done.
Agree, his working area is as if not cleaner than some operating theatres : )
Was thinking the same thing. I though he must have bought the swarf to do the test.
@@keithholdsworth4125 He probs just emptied out his vacuum on the floor...
Excelente proyecto muy bien desarrollado y mejor ejecutado , un ciclón magnífico , como quien dice a partir de dos botes , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
Hola. Estoy tomando el clase de español en mi escuela. Yo siempre estoy buscando practicar y improver mi vocabulario y comprensión de la idioma. Por favor, ¿que quiso decir con la frase "como quien dice a partir de dos botes" usted?
@@samp-w7439 Que la base principal del proyecto , son dos botes o latas o cubos cómo les quieras llamar , espero haber aclarado tus dudas , un cordial saludo.
@@viorsa8200 ¡Muchas gracias por la respuesta y clarificación!
Very nice take on the bucket cyclone! I suspect that your intake on the bucket will be the weak spot - where the short white flexible hose goes in and is attached with putty. A more durable solution might be to have a rigid intake and "cast" it in place with liquid epoxy or a bit of fiberglass.
Only very light dust will make it to the vacuum cleaner, but over time it will clog up the filter. If you can get cheap disposable bags for the vacuum, they will save some time on shaking and blowing out the filter.
A smaller (faster) secondary cyclone will remove more fine dust and prevent it reaching the vacuum, but at the cost of some airflow. A secondary cyclone could even fit inside the top bucket...
Beautifully made altogether.
This will be a weld style epoxy putty that will be going nowhere, not pretty , but definitely permanent
Just one word: masterful.
Thank you Jisaku for your good work and for sharing your expertise with everyone. 👍😉
Holy smokes, not a single speck made it into the vacuum cleaner... This is mind blowing, Kudos.
I think you mean koubous! 🤣
Excellent. I loved this answer 😃. Thank you
Very interesting design and impressive results. One mention, if I may, at Time 1:40 When I have a shape like that to cut out, I use two different hole saws; obviously the larger one at one end and a smaller one at the other end. Then just use a jig saw, or whatever one has available, to cut between the holes; seems to save time.
Great idea.. sir i never though about it👌👌
Use your dremel cutting disc (or buy one - usually they are included) to cut out those shapes in metal instead of drilling 30 holes, cutting out remnants, then grinding the edge clean with the dremel anyway . . . great cyclone build though.
Sometimes you don't have cutting discs and don't feel like going to the store. Chain drilling is often used in aviation as well for repairs.
Another option is to use a sheet metal nibbler tool (drill attachment accessory) and cut out that shape.
Or using a jig saw
годиться только для крупной пыли, для опилок. а вот попробуй пыль от штрабы поймать, и поймешь что не работает все это.
Thank you very much. You are competent in what you do and I am very proud of you for being the best artists in the field. Best regards from Aden Yemen.
Достойно!!!
Вот только вопрос, а если вход в циклон сделать ниже отсекателя из сетки не будет эффективность выше?
По идее ведь мелкую легкую фракцию может затащить на входе...
I always enjoy watching your builds. Very informative and I respect your craftsmanship.
Made a version of this with a 55 gallon steel drum, and I love it!!!
Thanks for the great ideas!!!!
Que boa ideia!!! Qual o nome da peça utilizada para juntar as duas latas? Obrigado
Lever Lock Ring For Pail ?
Brilliant. Fast becoming the go to man for any DIY project.
The final test is pretty damn impressive !
Круто👍👍👍👍 . Лайк и подписка. Ни какой лишней болтовни- всё понятно! Ни кого не слушай! Всё Отлично!🤝💯👏👏👏👍👍👍🔥🔥🔥
I have made it few months ago but my 1500W vacuum cleaner caused radial implosion of the metal barrels I used. Definitelly a barrels with stronger metal sheet is needed.
acaso es Japonés? una pulcritud, detallista y minucioso al hacer las cosas. Que buenos videos.
Yes,Thanks
Thank you, really enjoyed that and would like to make one, but where can I buy those containers? I searched everywhere.
Very good build, great design, not that we ever see sawdust in your workshop !!
Hi, i love your job, it’s so satisfying!
I would like to know where you buy the circular accessories in aluminum for the Makita triming machine please ?
Have a good day
( Es ) Un ciclón nunca te quitará el polvo fino .
Sólo sustituye a la bolsa de filtro .
Donde quedan las partículas que pueda filtrar .( un ahorro en bolsas )
El polvo fino , que no ves , tendrá que ser filtrado por el BUEN filtro de la aspiradora . ( HEPA )
De lo contrario ... lo respirarás.
👍👏
8:27 i followed your diy and modfied just by adding cheap stocking on metal mesh as filter, almost no dust in my vacuum
Thank you! Your videos are always easy to follow and lead to successful projects each time. Thank you so much. I have learned a lot from your videos!
Сделал точно такой же. Если кто сомневается, то скажу, такой вариант реально работает. Спасибо автору видео.
Nuevamente gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Francisco gamez un abrazo muy fuerte y saludos bendiciones para usted y toda su familia es usted genial 😀👍👍👍👍👍👍👍👍👍👍
Спасибо за идею пылеуловителя из перфорированного металла . Со второй попутки понял зачем нужны магниты .
Ingenious.
I am bowled over at the precision and craftsmanship of the work.
I love it! But I _have_ to to know: why does the sheet of expanded metal say "Eggs"?
Looks like a brand name.
Now add an internal bag to your vacuum. It will keep that filter clean indefinately and keep the suction near peak for much longer. Plus its a cheaper than a filter if you happen to overfill your collector and pull debris into the vacuum.
You seem knowledgeable. Can I ask you a question -- what is the purpose of the mesh drum shown in this video?
@@dsaurabh13 it blocks debris with very little weight but larger surface area from entering the other tube(source of the vacuum). Things like small plastic bags or leaves that won't tumble and flow along the outside edge and settle to the bottom.
@@Unorthatrox Oh, thanks bro..
Very effective! Better than some, more complicated designs! And I loved that view from inside the cyclone :-)
Thanks for sharing those tips and the make, it is 100% perfect!
Very good job, I wanted to make one but for the ash that sticks a lot to the filter and I wanted to know if your design could work with stove ash. thank you.
Un proyecto muy interesante y bien ejecutado, de los más sencillos que he visto hasta ahora. Enhorabuena.
Desde Málaga, España.
This is the most simple yet superb end product design I've seen. So good.
質問です。掃除機側のパイプの先端は、吸い込み側のパイプの先端より下方にありますか？
この２つのパイプの垂直位置関係はどのようにきめたらいいのでしょうか？
The camera was very good inside the box. I have solved the questions in my mind. thanks
自分で作っちゃうところがすごい！
10：30の「サイクロン集塵機の内部......ぐぉぉぉぉぉっ」って、せっかくカメラ仕込んだのに すぐ見えなくなっちゃったのは、
ちょっと笑っちゃいましたけど、それも集塵能力の高さの証明でしたね。
Мастер вам ювелиром надо работать смотреть одно удовольствие с приветом из России
Your cylindrical screen is slick; does coarse dust accumulate on it? How much fine dust coats and clogs the shop vac filter?
いつみても美しい作品ですね😊
『よし、何とか自分も真似して作ってみよう！』と思いましたが、もし販売するとしたらおいくらで売っていただけますか⁉️😮
ありがとうございます。
販売はするつもりないです。もうお金はお腹いっぱいです。
If the bin is more than half full, how do you empty the trash?
What are the 4 metal inserts installed on the bottom side of the lower round wooden piece for? I didn't see the purpose of these. Someone please tell me. Some measurements would be nice also.
No se inglés, pero esas piezas metálicas son imanes de neodimio, los uso para unir esa pieza con la parte superior del cilindro de arriba
Great video! Always a pleasure to follow you - not only the actual project but also the way you handle it! There are so many tricks shown any starter can take a lot out for his projects!
On top of the content I love as well the way you put it into the video; never boring and always showing the right level of detail!
Thanks a lot for taking the efforts to share your experiences and also thanks for the perfect way of presentation
Continue like that !
Best regards Herry Scholer
I'm confident I could leave my cupcakes to cool inside the vacuum unit, clean my shop, and the cupcakes would still be perfectly edible!
Good 👍very nice! 👍❤💜💙🤩💕🙆
Скажите пожалуйста как Вы сделали наклейку в виде капли, по которой нанесли разметку на ведро и после высверлили отверстия? Как вы её расчитали?
Мне очень понравилось ваше видео❤ респект
Brilliant video, great design and well executed.. cheers from London England 👍😎🏴
Hi! Good result! What is the diameter of the perforation hole?
Absolute genius!!!! Loved the filter :D
You can endlessly look at how this man works!
I love the design, but don't understand the purpose of the recessed washers in the top plywood end of the separation cage. Can someone explain their purpose?
I thought the same but they were magnets not washers, to hold separation caster in place. Makes it easier to remove when it needs to be cleaned
Impresive... Excellent work as always
Hi, have You tried it with some very fine dust, like from drywall sander? i'm on a verge of some renovation work in my house, and thinking cheap vacuum with such cyclone dust collector vs pricier vacuum with filter cleaner system, got any thoughts on that?
thanks in advance!
M.
Muy bien ...siempre aprendemos cosas nuevas.....gracias desde Barcelona españa
Congratulation Dear Mr EXPERT OF DIY! Thanks to You regarding your several video, very clear smart sessions. Best price cheap than dust paper bag for the vacuum cleaner!
Im sorry sir but as a beginner I didn't understand how you put in the filter you made hang upside down without falling? . Is there a magnet you put in or ? Did i miss something?
I'd use a dremel tool to cut the side opening. Less to sand down.
Best thing about these videos is that you don't end up put off by the fact that you don't own a dremel
@@overover.. He still does use a rotary tool to grind down the edges.
@@michaelfairchild Dead right, will watch more carefully next time
nice design.. what was that stuff you put around the white pipe looked like some sort of putty?
Nice idea. Great job. Greetings form Poland.
I didn't understand: what is the advantage of using this system rather than the vacuum cleaner directly?
Easier cleanup -- vac filter doesn't get clogged / lasts longer (less expense).
could you please show as vacuum dust filter? i interesting what's happened to fine fraction of wood dust. tnx
That was really nicely done! Thanks for sharing
а что осталось в сетке? и как из неё вытаскивать когда забьется?
おおっ❕ もうじき100万人登録なんですね。おめでとうございます😀
ところで、以前ペール缶を１個のサイクロンタイプの動画なかったでしたっけ？
あれ、真似して作らせてもらいました😀 重宝しましたよぉ～❗
Where can I get buckets like the ones you have here? They're absolutely perfect for this application.
Ideal solution. Great idea. 👍🏻🇺🇸
Wow! What a great design.
good !! I like the simple structure, but I don't know the name of the perforated wire mesh, so I can't implement it.
Thanks for this video, really nice build.
I would like to know what size the holes on the mesh are? as I'm planning to try this build. Its the most effektive diy cyclone I'v seen and the simplest build 👍 Also what hight is it all together? I'm guessing that the hight has to be just right, for this design to work effectively?
Outstanding great Vlog 👍 keep up the great Content 👏
Drogi kolego jakie są wymiary siatki mam na myśli średnicę oczka, rozstaw oczek i grubość blachy. Super projekt. Przy okazji ile litrów mają wiadra? Pozdrawiam z Polski
Thank you very much. Your designs and technical skills are impressive.
What type of epoxy is it that you are using to bond the wood and steel? Where I live where have tubes of 2 part epoxy, but it is very expensive so was wondering what it is you are using because you are using it quite often. Nice work!
What if an implosion occurs? There's no valve visible, just in case 🤔
What kind of clay are u using is it epoxy clay?
Would this work with a 4 inch tube connected to a dust collector using bigger buckets?
Отличная работа. Правда мне проще раздобыть плутоний-239 чем такие ведра :D
За место сетки надо взять автомобильный фильтр - это раз! Индикации заполнения нет и при наборе полностью, как вы разберете эти два ведра - это два!(как минимум одно ведро высыпиться рядом)
Excellent project
Always excellent craftsmanship!
Как всегда, мастерская работа. Удачи!
Why do you use magnets?
Что бы держалась сверху и можно было снять, промыть
To Hold the Mesh Filter to the top bin
with a cyclone it is able to pull water? :)
Nice build, those things separate really good but are somewhat costly when it comes to static pressure since the container will snatch pretty much all of it.
Now that's an important point and one I hadn't thought about (or had forgotten). Any idea what the numbers would be?
@@shaman935 Yea, you will loose about 80-90% of the static pressure when using a typical china cyclone. This sort of separator is a bit better, but most baffle builds will remove at least 70% or more. This is fine as long as you don't plan to vacuum any heavy particles, having long hoses or downsizing the hose to much.
@@eherlitz Many thanks for the info! Wow, that's a significant amount. Hmmm, I may have to re-think my desire to make or have a separator...
@@shaman935 I have one connected to my saw and it seems fine. The pressure drops a lot more drastically from clogged filters without it! I suppose it depends how disciplined you are about emptying out shop vacs and cleaning filters though.
You can make a simple one in about 20 minutes from a large plastic bucket if you want to test. The inner mesh cylinder is unnecessary, you just need a baffle to separate the dust collection from the cyclone. There's approximately a billion tutorials on yt for how to do it.
@@stevem815 Many thanks for that info! Seems like possibly another good example of 80/20, or optimal combination of effort/ cost/ performance.
Hope you're having a great T-day!