The version 1 compact brushless reciprocating saw fit very nicely into this drawer. With space for two battery packs and a blade case. It can also fit up to 10 tough cases.
Great overview and showing of the TSTAK single drawer. Thank you for showing it to us. My wife got me the TSTAK crate by mistake and I now would like to get this single drawer for that single item. Liked and subscribed 👍
Can you please do a video with this new large draw and the new shallow organiser on top please. Thinking about buying that setup and a video would be really appreciated 👍 My plan is to have my 10.8v drill and screwdriver in the draw and then all my screws etc in the organiser above
I'll see what I can do. Drawers are screwed into the van at the moment but need to take them out in a couple of weeks so will drop a short vid for you then.
I've never lost a tool down the back but have found if you don't put tools back neatly or if they're a bit over sized the drawers get stuck and become a bit of an arse to open.
So how deep are the shallow drawers on the box with 2 drawers? I'm mostly looking for a box I can connect to my Tstack stack for keeping things like drill/bit sets, grinding disks and ppe and such.
Off the top of my head they're about 35 - 40mm deep. Anything larger than a large screwdriver handle gets stuck. Drill bit sets and spade bits fit in perfectly. 👌
@@kingsworkshop685 thanks a lot. But seems my boss bought a few of each of the Tstack cases/bags so I'll get to have some hands on with them before I buy.
I've just recently upgraded my toolbox system. From the basic dewalt tstak box on wheels. Gone for the tstak trolley, with a deep drawer at the bottom, then the twin shallow drawers above, followed by the deep tstak box.. perfect set up for me, whilst on site i dont have to dismantle the boxes to get to any tools. Power tools in the deep box, then the 3 drawers have my hand tools in. However only one thing that is bugging me now, thinking of a way I can lock my drawers when I'm not around.. any suggestions?
I know many trades men have been robbed following reviews of van storage, but if you feel comfortable could you do a van storage review even if it's just the tstak and how you have them secured to the van I thinking do I go tstak or sortimo for the draw system one being alot more expensive then the other.
I’ve run into troubles of the drawer bottom dragging with not much weight in them…not impressed with the Tstak. The Craftsman Versa stack 2 drawer don’t seem to have this issue.
Great video mate. Just been trying to get these drawers but everyone seems to be out of stock, unless you want to be ripped of on eBay! I’ve just started changing over to Dewalt and so far I’m really impressed. I notice to right of the screen you have one of those tote boxes with the long handle….any good? Also if you’re still over run with the boxes with the lids from those drawers, I could definitely make good use of those! Thanks again for a great video, I’ll check out your other videos. Cheers, Martin.
I wasnt aware there was a shortage 🤷♂️ try finding the stanley pro stack drawers. They're exactly the same and even connect to the tstak. Sometimes they're on offer at toolstation. I love the tote boxes, I use them more than anything else.
The version 1 compact brushless reciprocating saw fit very nicely into this drawer. With space for two battery packs and a blade case. It can also fit up to 10 tough cases.
Hey, good to see you back.
Its good to be back. Thanks for watching. 👍🙏
Thank you so much for showing how to get those blasted drawers out! You should have seen all the junk that had gotten under them!
Glad it was helpful!
@@kingsworkshop685 great vid! but do you have to pull the white tab's or push them? can not see it clearly on the video
Great overview and showing of the TSTAK single drawer. Thank you for showing it to us. My wife got me the TSTAK crate by mistake and I now would like to get this single drawer for that single item. Liked and subscribed 👍
Are the black bins still available ?
Can you please do a video with this new large draw and the new shallow organiser on top please. Thinking about buying that setup and a video would be really appreciated 👍
My plan is to have my 10.8v drill and screwdriver in the draw and then all my screws etc in the organiser above
I'll see what I can do. Drawers are screwed into the van at the moment but need to take them out in a couple of weeks so will drop a short vid for you then.
Thanks. I heard you can lose tools down the back of the drawers. Have you found that?
I've never lost a tool down the back but have found if you don't put tools back neatly or if they're a bit over sized the drawers get stuck and become a bit of an arse to open.
Good video didn’t know you could take out the draws handy to know.the boxes would come in handy if you don’t want them how much do you want for them.
I've actually found a use for them so don't have any left I'm afraid. Sorry about that.
@@kingsworkshop685 no worries good video may bolt mine in the van now I know draws are removable
Are you using the dividers in the small drawers? Mine have gone missing and I can't get hold of any for love nor money 😫
I'm not but I think I threw them away. I'll have a look in my spares box to see if I have any.
So how deep are the shallow drawers on the box with 2 drawers? I'm mostly looking for a box I can connect to my Tstack stack for keeping things like drill/bit sets, grinding disks and ppe and such.
Off the top of my head they're about 35 - 40mm deep. Anything larger than a large screwdriver handle gets stuck.
Drill bit sets and spade bits fit in perfectly. 👌
@@kingsworkshop685 thanks a lot. But seems my boss bought a few of each of the Tstack cases/bags so I'll get to have some hands on with them before I buy.
Is it compatible with the tough system 2.0 rolling box. Can it be stacked on it?
If you purchase the adapter plate it can be.
I've just recently upgraded my toolbox system. From the basic dewalt tstak box on wheels. Gone for the tstak trolley, with a deep drawer at the bottom, then the twin shallow drawers above, followed by the deep tstak box.. perfect set up for me, whilst on site i dont have to dismantle the boxes to get to any tools. Power tools in the deep box, then the 3 drawers have my hand tools in. However only one thing that is bugging me now, thinking of a way I can lock my drawers when I'm not around.. any suggestions?
A steel cable to go around the entire stack, or fabricate a metal strap with hinges and a lick.
Do you have any excess small plastic containers for the DWST170705 single draw system,if so how do I obtain them from you
I ended up using them all I'm afraid.
I know many trades men have been robbed following reviews of van storage, but if you feel comfortable could you do a van storage review even if it's just the tstak and how you have them secured to the van I thinking do I go tstak or sortimo for the draw system one being alot more expensive then the other.
I will be doing one soon. I have no lighting at the moment due to a blown fuse but as soon as that's sorted I'll post one. 👍
I’ve run into troubles of the drawer bottom dragging with not much weight in them…not impressed with the Tstak. The Craftsman Versa stack 2 drawer don’t seem to have this issue.
I've had the same issue and I find tools get wedged quite easily.
Can you lock the drawers?
Not without modification. Sorry for the late response.
Great video mate. Just been trying to get these drawers but everyone seems to be out of stock, unless you want to be ripped of on eBay! I’ve just started changing over to Dewalt and so far I’m really impressed. I notice to right of the screen you have one of those tote boxes with the long handle….any good? Also if you’re still over run with the boxes with the lids from those drawers, I could definitely make good use of those!
Thanks again for a great video, I’ll check out your other videos. Cheers, Martin.
I wasnt aware there was a shortage 🤷♂️ try finding the stanley pro stack drawers. They're exactly the same and even connect to the tstak. Sometimes they're on offer at toolstation. I love the tote boxes, I use them more than anything else.
Can they connect to Stanley FatMax
These will connect to all stanley fatmax prostack boxes but not any fatmax box. The pro stack and Tstak are exactly the same just different stickers.
You definitely can with Milwaukee packout ..lol. I was dealing with that today.. it’s still there.. not sure what it is
Can you take the drawers out on the packouts?
Would a 10.8v drill fit in one of the shallow draws?
I'm afraid not. A hammers a push.
They should sell them with out them storage boxes it would bring down price then sell them storage boxes as extras
The plastic pins sheer off when loaded up it's a common fault.
I never had the issue myself untill the other day and then happened on two boxes. The irony 🙄
Nice review. The 2.0 top connectors have metal pins with plastic clasp. That's the only difference between the two
Rip those dividers outta there! 😂