😂😂😂 I have built many of these however I just was not totally in the right frame of mind and made a mess 😂 but it all work out! I bet you I never make that mistake twice!! 🇺🇸🤝
Hello Jeff awesome stuff the only person I can find to build one of these can't wait till mine comes what bearings are those got a link and the diff cups wow
Nation Skander is where I got the bearings bro. Sorry I got busy yesterday. I can’t remember the number of the bearings but you can buy a whole a whole hpi Baja bearing kit from them and it’s cheaper than just getting the two bearings
@@moneyoverbeef Im assuming you are talking about the big outter bearings because now the IRC comes with oil impregnated bushings only for super stability. So with that being said the big bearings are 20x32x7 6804-2RS have a great day bro!
Do you have a video of how to get the rear diff out of the car? My baha ext was running fine for a while last night and then all of a sudden it's just revving out and barely moving. Spinning the wheels by hand both wheels move. I think either the diff split or a clutch problem
I dont think I have a diff removal bro. You will have to pull the whole transmission if you dont have a three piece trans case. If you turn one wheel and the other turns then the diff is probably okay. Not moving and revving out is caused by either an axel pin has broke or a diff pin inside the diff under the bigger gear spider gears could be broke as well and causing it to free spin.
@@eastsiderc broken dog bone pin for the second time. I think maybe the smaller tires aren't helping the matter. Ordered replacement dog bones and gonna put the stock tires back on. If that doesn't help I will save up to order the innovative rc UHD axles with the UHD drive cup kit.
hey bro 15mm OD 10mm ID and 4mm thick I sell bearing kits for bajas too very nice ABEC-1 quality smooth rolling bearings . and these come in the kit. 4 of them. under extreme power bushings should be used in place of the bearings. Thanks for watching
Brother Judda I got it all over my fingers 😂😂😂! That 1 milly didnt wash off so well. I had to wipe it off good with paper towels and wash my hands a couple times with dawn dish soap. I need to find something that cuts silicone better! Maybe mineral spirits I dont know. I need ask my buddy Allen Im sure he will know whats best to use! Hope you are having a blessed day brother
@@eastsiderc that diff "fluid" look more like shoe goo then fluid. Guess it's great for field play, or drag racing. Curious what weight recommended for dirt off road track use? That diff turned out nice, tolerances looked great on everything.
@@eastsiderc Every day I get to put my hands together on the side of the dirt is a good day and try a lacquer thinner for cleaning your hands lacquer thinner strong it’ll dry your hands out but it usually gets all the yucky stuff off
Great Vid And Tech Tips 👍 Clean and Right and Tight.
Thanks Eddie I hope you have a blessed day bro!
No need to apologize brother Jeff. Life always gets ahead of us. Family and house is always first. Awesome vid man 👍
Well thank you brother I appreciate that for real! Hope you have a blessed day!
That's a big drive cup!
It is brother and it’s my hands-down, favorite
Thank You for the detailed Diff Build Video Bro!!! Cheers from OIIIO \m/
Absolutely brother Pete! Great talking to you brother I hope helped you decide on some things! 🙏🇺🇸🤝🤝🤝
Thank you! Never built one yet, but it's great to watch in advance!
Well thank you brother! I hope you are having a blessed day!
Good stuff brother. I will use this when I finally get my second aluminum transmission happy! Lol Glad to see you posting and no need to apologize.
Thanks brother Tony! Yeah man Im doing pretty good. Better every day! Appreciate you bro! Hope you are having a blessed day
Great build Jeff! I did mine not to long ago and I figured out the brass plates during my dry fit! 😂😂 all good bro. Can’t wait to see it rippin!
😂😂😂 I have built many of these however I just was not totally in the right frame of mind and made a mess 😂 but it all work out! I bet you I never make that mistake twice!! 🇺🇸🤝
@@eastsiderc no sir! But somehow always put the cups on before the outside bearing no matter how many times I re build a diff 🤣😂🤣
😂😂😂 well I have done that too! Then you wanna cuss 😂😆
Hello Jeff awesome stuff the only person I can find to build one of these can't wait till mine comes what bearings are those got a link and the diff cups wow
Let me round of some Info for you brother I’ll get back to you.
Nation Skander is where I got the bearings bro. Sorry I got busy yesterday. I can’t remember the number of the bearings but you can buy a whole a whole hpi Baja bearing kit from them and it’s cheaper than just getting the two bearings
Cool video and great build
Thanks brother! 🤝Hope you are having a blessed day
Hey son good video as always 👍you got all the best of the best stuff to make it all work right 😎
Thanks Dad glad you liked it man! And I sure do.
Heck yea wrenching tech tips👍👍🤜🤛
Thanks brother have a great day bro!
Very informative as always where can I get some of them electric bearing for the outside diff cup?
I got them from California a company called Nation Skander ! Hope you have a great day bro!
@@eastsiderc By any chance can you give me the size of the bearings.
@@moneyoverbeef Im assuming you are talking about the big outter bearings because now the IRC comes with oil impregnated bushings only for super stability. So with that being said the big bearings are 20x32x7 6804-2RS have a great day bro!
@@eastsiderc Yes thank you very much!!
@@moneyoverbeef you’re welcome
Great wrenching vid diffs can be tricky gotta love that 1m diff fluid I rebuilt my diffs not long ago for the 30N with the 1m great stuff ☠️🛠👊👍
Thanks brother it is good stuff! I was happy to get a bottle . Its always out of stock at hobby town! Hope you have a blessed day bro!
Hey son as always very informative for everyone. I cracked up when you said this only liberal thing I do 🤣🤣🤣. Love you!
😂😂🤣 I knew you would catch that mom too funny.
No worries thanks for posting
Hey Ryan thanks brother! Im glad no one cares that I broke my word. 🤝 have a great day bro
Do you have a video of how to get the rear diff out of the car? My baha ext was running fine for a while last night and then all of a sudden it's just revving out and barely moving. Spinning the wheels by hand both wheels move. I think either the diff split or a clutch problem
I dont think I have a diff removal bro. You will have to pull the whole transmission if you dont have a three piece trans case. If you turn one wheel and the other turns then the diff is probably okay. Not moving and revving out is caused by either an axel pin has broke or a diff pin inside the diff under the bigger gear spider gears could be broke as well and causing it to free spin.
@@eastsiderc broken dog bone pin for the second time. I think maybe the smaller tires aren't helping the matter. Ordered replacement dog bones and gonna put the stock tires back on. If that doesn't help I will save up to order the innovative rc UHD axles with the UHD drive cup kit.
What size bearings you use for the inside ?
hey bro 15mm OD 10mm ID and 4mm thick I sell bearing kits for bajas too very nice ABEC-1 quality smooth rolling bearings . and these come in the kit. 4 of them. under extreme power bushings should be used in place of the bearings. Thanks for watching
If you don't have a baja I have quite a few of these bearings if you find me on Facebook under Jeff lohr we can make a deal!
Awesome video yeah I don’t like silicone either stuffs messy
Brother Judda I got it all over my fingers 😂😂😂! That 1 milly didnt wash off so well. I had to wipe it off good with paper towels and wash my hands a couple times with dawn dish soap. I need to find something that cuts silicone better! Maybe mineral spirits I dont know. I need ask my buddy Allen Im sure he will know whats best to use! Hope you are having a blessed day brother
@@eastsiderc that diff "fluid" look more like shoe goo then fluid. Guess it's great for field play, or drag racing. Curious what weight recommended for dirt off road track use? That diff turned out nice, tolerances looked great on everything.
@@eastsiderc Every day I get to put my hands together on the side of the dirt is a good day and try a lacquer thinner for cleaning your hands lacquer thinner strong it’ll dry your hands out but it usually gets all the yucky stuff off