You can see a bit in the video when I removed it; I didn't know it will be difficult, but anyway. I used a Screwdriver 🪛 and a hammer 🔨 just be gentle put in a surface to hold the edges but can release the bolt 🔩 out. I hope it helps you guys
@@gypsyofcruzz Which side did you extrude from? Marshal is written on the headphones, do you need to press towards M or L? Left to right or right to left?
Great job! Mine are in good shape other than the headphone pads and headband pad. Where did you get replacements? How did you get the earpads to attach? Any help would be appreciated. Thanks!
Hello! Great job Bay the way. So, I have the same headphones, they also need to be restored but I can't remove the gold pins on the sides. Could you give me some advice?
How did you replace the headband?
Were you able?
Which side did you extrude from? Marshal is written on the headphones, do you need to press towards M or L? Left to right or right to left?
How did you get the golden bolts out of the hinges. I haven’t managed to get them out.
Yes! It will really help us!
I'm having the same trouble getting those out now. Did you manage by now?
You can see a bit in the video when I removed it; I didn't know it will be difficult, but anyway. I used a Screwdriver 🪛 and a hammer 🔨 just be gentle put in a surface to hold the edges but can release the bolt 🔩 out. I hope it helps you guys
@@gypsyofcruzz Which side did you extrude from? Marshal is written on the headphones, do you need to press towards M or L? Left to right or right to left?
@@buildinghero2340 у вас получилось? Как?
How long did you have that headphones for yours to look like that? I'm planning on buying a Marshall Monitor II ANC... They're not cheap.
They are very old, too much quality to be in the trash 🗑️ so I gave them another life.
Because ecoleather in this model very bad quality. Mine look almost close after 2 years of using.
how to fix that pads metal attachment? i have lost one side metal ring n using double sided tape to attach pads ...
great job. worth a LOT
these headphones sounds so much better after being used for couple of years
Thanks a lot man !!!
@@gypsyofcruzz
I've bought fake ones, for 20 bucks
Used frame and cushions, )) happy days ))
Great job! Mine are in good shape other than the headphone pads and headband pad. Where did you get replacements? How did you get the earpads to attach? Any help would be appreciated. Thanks!
Thanks mate, i reused a lady leather skirt to made a similar texture to the original ones.
Hi, habe ich das richtig verstanden, dass man den Kopfbügel nähen muss??? Danke
How do you remove the bolt that holds the headphones to the headband?
@@vintagelicious9405 With a screwdriver of that diameter and a small hammer, you give it a light blow and it comes out little by little. Regards !!
Hello! Great job Bay the way.
So, I have the same headphones, they also need to be restored but I can't remove the gold pins on the sides. Could you give me some advice?
It has a pin. Just with a flat head screwdriver and a small tap with a hammer the gold pin comes out. if that's what you mean
For mine , its impossible to remove the Gold pins.
@@PreViszla With a screwdriver of that diameter and a small hammer, you give it a light blow and it comes out little by little.try it
Good job, now what's your address so I can send mine for repair as well? 😜
how did you remove the gold pin???
It has a pin. Just with a flat head screwdriver and a small tap with a hammer the gold pin comes out. if that's what you mean
Do you need to solder the wires?
@@johnnywlkr357 yes sure
gg ! but vidéo to short ..