Order of cables for soldering large board 1-gold 2-blue 3-blue/gold 4-blue/red 5-gold/red small board 1-green 2-red 3-black 4-green/red 5-blue 6-green/gold
Музыка конечно хорошая, но лучше бы комментировал, что делает. А самый сложный момент, как отсоединить оголовье вообще выпал из кадра! Так и не понял, как его отсоединить. Поэтому пока не могу поставить лайк.
Алексей, приветствую. Попытался снять видео не ради лайков, а в стремлении показать процесс замены ковера. К сожалению это всё, что получилось снять, специального штатива не нашлось, поэтому телефон лежал на полке над столом. Разбирал свои наушники в первый раз, и также не предполагал как там всё внутри устроено. Если правильно понял вопрос, то интересует как снялась деталь на минуте 2:20? Там пришлось применить силу, там запресованы были металлические ободки в пластиковую деталь. И при обратной сборке их тоже нелегко вставить обратно. Но в принципе реально. Если есть вопросы, постараюсь помочь.
@@alexanderzavialov1545 объясните пожалуйста как вы вставили обратно , подголовье в крепление,такое ощущение ,что я что-т о делаю не так или мне нужна ещё одна рука)
Люди, не зря у чела еврейская музыка стоит под видео, иммейте ввиду, что когда вы скобы снимите (золотистые) вы их обратно в заводское состояние не согнёте, и крепления (кронштейн) который держит наушник, вытянув его с обода, обратно он не встаёт, пришлось на суперклей садить, мой вам совет, не смотрите таких евреем на ютубе, которые специально обрезают видео на моменте, где он не может надеть новое оголовье и заканчивает на этом видео (я всё таки сделал это, но ушло три дня, что скобы я не смог согнуть обратно в заводское состояние, что крепление на клей пришлось хреначить, что это оголовье новое хрен натянешь) скажу честно, лучше бы старое оголовье оставил, ведь за новую внешность нового оголовья я расплатился внешностью этих золотистых скоб и муками на 3 дня)
Hi, I was disassembling my headphones, but couldn't figure out how you separate the two parts at around the 2:11 mark. Do I have to pull them in opposite directions? Or do I have to take apart the plastic bit holding them together?
Hi, due to the fact that the holes in the plastic part have round holes and the metal rods are slightly flattened, you need to pull these rods out of the plastic part using force. They come out, but with enough force. And when assembling, they will also have to be inserted with force.
How did you put it back on the metal rods? I almost destroyed the headphones and the entire workbench trying to pull them apart. You can't seriously expect somebody to put it back in.
Yes, this was perhaps the most difficult action. Pressed it in with knipex pliers wrench. You could, of course, try it with a vice, but I can store them a little far away.
@@alexanderzavialov1545 I used pliers too to get the "RIGHT" and "LEFT" clips on. Not very pretty on one side, because a little but of the plastic inside the headband came out and I couldn't push it back in. Putting the two rods back in the plastic holes I solved by widening the holes with a drill. Not very ideal but I think it's enough. With how stiffly it was holding before I think it could probably support my entire body weight if just grabbed the headphones and hung on them :D
@@alexanderzavialov1545i have one more question. I saw they have on two boards 5 And 6 cables. This means i Need to order 6 cable set or how much? Thanks..
The point of doing a video to show "How to" is actually to show. I cant see shet with that funny camera angle. And lets talk about the elephant in the video. WHAT THE HELL IS THAT SONG. Sound serbian or croation but more in the comic kinda way. From where do you even have such a recording? Spotify? Why put it in the first place. Cant deny the effort tho. xDD
Thank you, my dear friend, for your feedback. I'm sorry that you didn't have the skills to do this job yourself, without the help of instructions on TH-cam. Before repairing my headphones, I also wanted to find detailed instructions, but I didn't find them. I created the video only so that people could imagine what actions they would have to do, and everyone could decide whether they want to do it. This is not a commercial video, there is no monetization, I do not make money on it, I only share what I have. Good luck to you in your difficult life!
@@alexanderzavialov1545 seriously, to just replace the headband you have to dismantle the cable ??? really ? how it is possible ? so then, if it is in wrong state, no other choice to trash it ??? it is ncrazy !! sorry, but I don't have all this material, and honestly I'm not confident at all t do that ! How Marshall can deliver such a materail ? I don't want to trash my headphone just for the headband, it is not serious...
Unfortunately, I did not find other options available. I also saw a video where a person sews directly "in place of the headband without disassembling the wires, but for this you need to have materials and be able to sew ...
@@alexanderzavialov1545 indeed I think it is the only one solution if we don’t want to dismantle I don’t have at all skills and material to do it… I contacted Marshall support and they directly say that they don’t foresee the replacement … it’s incredible … I will try by sewing it and will see Thanks anyway for this video and for your quick reply ;)
Order of cables for soldering
large board
1-gold
2-blue
3-blue/gold
4-blue/red
5-gold/red
small board
1-green
2-red
3-black
4-green/red
5-blue
6-green/gold
This is out of my “find out” competences.
Now, where is that mute button?
Музыка конечно хорошая, но лучше бы комментировал, что делает. А самый сложный момент, как отсоединить оголовье вообще выпал из кадра! Так и не понял, как его отсоединить. Поэтому пока не могу поставить лайк.
Алексей, приветствую. Попытался снять видео не ради лайков, а в стремлении показать процесс замены ковера. К сожалению это всё, что получилось снять, специального штатива не нашлось, поэтому телефон лежал на полке над столом. Разбирал свои наушники в первый раз, и также не предполагал как там всё внутри устроено.
Если правильно понял вопрос, то интересует как снялась деталь на минуте 2:20? Там пришлось применить силу, там запресованы были металлические ободки в пластиковую деталь. И при обратной сборке их тоже нелегко вставить обратно. Но в принципе реально.
Если есть вопросы, постараюсь помочь.
@@alexanderzavialov1545 объясните пожалуйста как вы вставили обратно , подголовье в крепление,такое ощущение ,что я что-т о делаю не так или мне нужна ещё одна рука)
@@user-cw6ke8pl2i Если я правильно понял вопрос, то да, обратно вставляется с трудом, с достаточным усилием.
Люди, не зря у чела еврейская музыка стоит под видео, иммейте ввиду, что когда вы скобы снимите (золотистые) вы их обратно в заводское состояние не согнёте, и крепления (кронштейн) который держит наушник, вытянув его с обода, обратно он не встаёт, пришлось на суперклей садить, мой вам совет, не смотрите таких евреем на ютубе, которые специально обрезают видео на моменте, где он не может надеть новое оголовье и заканчивает на этом видео (я всё таки сделал это, но ушло три дня, что скобы я не смог согнуть обратно в заводское состояние, что крепление на клей пришлось хреначить, что это оголовье новое хрен натянешь) скажу честно, лучше бы старое оголовье оставил, ведь за новую внешность нового оголовья я расплатился внешностью этих золотистых скоб и муками на 3 дня)
Hi, I was disassembling my headphones, but couldn't figure out how you separate the two parts at around the 2:11 mark. Do I have to pull them in opposite directions? Or do I have to take apart the plastic bit holding them together?
Hi,
due to the fact that the holes in the plastic part have round holes and the metal rods are slightly flattened, you need to pull these rods out of the plastic part using force. They come out, but with enough force. And when assembling, they will also have to be inserted with force.
@@alexanderzavialov1545 Thank you!
How did you manage the wires?
@@RANDOM-jpg93 I unsoldered the cables so I could remove the entire headband.
How did you put it back on the metal rods? I almost destroyed the headphones and the entire workbench trying to pull them apart. You can't seriously expect somebody to put it back in.
Yes, this was perhaps the most difficult action. Pressed it in with knipex pliers wrench. You could, of course, try it with a vice, but I can store them a little far away.
@@alexanderzavialov1545 I used pliers too to get the "RIGHT" and "LEFT" clips on. Not very pretty on one side, because a little but of the plastic inside the headband came out and I couldn't push it back in.
Putting the two rods back in the plastic holes I solved by widening the holes with a drill. Not very ideal but I think it's enough.
With how stiffly it was holding before I think it could probably support my entire body weight if just grabbed the headphones and hung on them :D
Hello. How much small cables are there
Hi, look below in the comments. The kind person has already made a list of small cables.
@@alexanderzavialov1545thank you So much
@@alexanderzavialov1545i have one more question. I saw they have on two boards 5 And 6 cables. This means i Need to order 6 cable set or how much? Thanks..
I would use old cables. they can be repaired if they break... There are two sets with different wire colors.
Damn shit music Man !!!!! Overall great job.
Thanks for the video. Where did you find the replacement part?
www.aliexpress.com/item/4000811479138.html?spm=a2g0o.order_list.0.0.5522180205pexm
So the soldering part is inevitable, am I correct? Which is something I've never done before :(
Yes, soldering is indispensable. But there isn't much...
This headphone is not replace headband.
The point of doing a video to show "How to" is actually to show. I cant see shet with that funny camera angle. And lets talk about the elephant in the video. WHAT THE HELL IS THAT SONG. Sound serbian or croation but more in the comic kinda way. From where do you even have such a recording? Spotify? Why put it in the first place. Cant deny the effort tho. xDD
Did U watch Ur vid before posting it ? I don't think U did, coz it did NOT Show the MOST Important & Difficult bits - This vid is Useless !!
Thank you, my dear friend, for your feedback. I'm sorry that you didn't have the skills to do this job yourself, without the help of instructions on TH-cam.
Before repairing my headphones, I also wanted to find detailed instructions, but I didn't find them. I created the video only so that people could imagine what actions they would have to do, and everyone could decide whether they want to do it.
This is not a commercial video, there is no monetization, I do not make money on it, I only share what I have.
Good luck to you in your difficult life!
Do you have to cut wires for this?
No, you don't need to cut cables. First you need to unsolder, change the cover, and at the end solder each cable back to its place.
@@alexanderzavialov1545американец проще 150 зеленых на новые потратит, о чем ты
do u have vid for major 3 replacement headband?
I don't, but on TH-cam I find a disassembly video of major 3.
@@alexanderzavialov1545 seriously, to just replace the headband you have to dismantle the cable ??? really ? how it is possible ? so then, if it is in wrong state, no other choice to trash it ??? it is ncrazy !! sorry, but I don't have all this material, and honestly I'm not confident at all t do that ! How Marshall can deliver such a materail ? I don't want to trash my headphone just for the headband, it is not serious...
Unfortunately, I did not find other options available. I also saw a video where a person sews directly "in place of the headband without disassembling the wires, but for this you need to have materials and be able to sew ...
@@alexanderzavialov1545 indeed I think it is the only one solution if we don’t want to dismantle
I don’t have at all skills and material to do it…
I contacted Marshall support and they directly say that they don’t foresee the replacement … it’s incredible …
I will try by sewing it and will see
Thanks anyway for this video and for your quick reply ;)
Good video, thanks. I agree, how can Marshall deliver such a product? All that hassle just to replace a headband.
Is this Major 2 or 3
Major II ( 2 )
Everything is out of frame and the complicated steps are skipped.
Useless.