Sprinter Van Radiator Replacement & Fix Leak Repair Coolant Hose 2001-2006 T1N

How to remove and replace the radiator on a T1N Sprinter Van. This is the same for Mercedes, Dodge & Freightliner Sprinter 2500 Vans years 2001 through 2006. Everything you need to know is in this video, check it out and remember to like & share this video!
Tools Needed:
10mm Socket
13mm Socket
T20 Torx
T40 Torx
Flathead & Phillips Screwdrivers
19mm Wrench
Drain Pan
Soap & Water!
Like, Comment & Subscribe! Thank you for your time everyone!
Shout out to Zimaleta!

[@gilgo20]

Man thanks to your vid i changed the radiator in my sprinter. It was fun. And i wouldnt even try if i wouldn’t see such informative vid. Thanks a lot what a great job!

[@johndenecke3713]

Well done, tks. One thing I would recommend is getting all the air bubbles out of the system before putting back on the radiator cap and to state this particular vehicle has an expansion tank (vs a radiator resevoir-not under pressure) that IS under pressure. Thanks again. Doing an 06 Sprinter w/ 330k miles on it. The horizontal seam of the expansion tank sprung a leak.

[@repairresell3449]

Nice job!

[@Marklar1]

Thanks!

[@HolyCowVideo]

Very Helpful Video 👍

[@Marklar1]

Glad it was helpful!

[@Indy452]

TY for the vid.. Do I need to go through all this to replace all the coolant hoses? Also, on the A/C cond coil, is it attached with rubber hoses or something? I definitely don't want to mess the AC up as its absolutely necessary in these vans. Thanks!

[@vlastimilchytil7690]

Thank you for this video

[@thomasadventurelife7014]

Great video. How long did the total replacement time take?

[@reytech1786]

Amazing video thank you ❤

[@moose7472]

What was wrong with the radiator? Did the plastic reservoir fail?

[@moose7472]

Great content. My Sprinter used Torx 45 &30. And if you remove bumper before draining, it’s easier to catch the fluid.