Was expecting a video that's funny because of how little Mrs. Maintenance knows about tools. Turns out, it's funny because of how MUCH she knows. Great video, you two!
Joey, I enjoy your videos so much. I wish that you were closer to Madison, Ms so I could use you for some special projects as a contractor for my company. I’d love to get someone to award 75-80% of our service call business so I could focus more on the new Hospital we are doing that has to be done by March of 2026.. We would love to tee you up up getting you on board as a first call solutions provider. Anyways, as far as this video goes… I see it like this… Behind every successful man is a good woman standing beside them… More than often they are left in the shadows and many forget that and don’t give their wives or significant others the credit they are due. Great job on the content and tell your wife we enjoyed it and she did better than most as far as knowing her tools. God Bless you all!!
@@EyeOfTheTiger601 appreciate the kind words. Building a hospital I’m sure is a stressful ordeal. I wouldn’t be able to do what I do without her… she is pretty great
@ I apologize . I should have been a bit more clear and concise…. Thank God I’m not building the entire hospital… But we are doing all the electrical. It will have 16 State of the Art Operating Rooms… 4 of them will be completely robotic other than the anesthesia along with one Doc and Surgeons observing the procedures going on in 4 fully automated rooms…. We have 7 different colors of all the conduit sized from 3/4” to 1-1/4” EMT. All the pipe 1-1/2” inches and bigger is just standard power and just silver EMT. We have purchased over 200,000 ft of 3/4” EMT alone for this project and 100,000 of it is different colors. It’s a blessing but a huge responsibility but one day at a time we are getting a little farther along everyday. Talk to me after the 200,000 ft of 3/4” has been installed and all wire pulled and terminated in one of the 184 Electrical Panels and it may be a different story if I have any hair left. Me and the boys all enjoy your videos. I hope you have a great Christmas this year and that 2025 will be your most productive year yet. Randy G.
I've missed a lot of your content lately. Fortunately I can watch pre-recorded episodes anytime. Unfortunately "lives" are the best when watched live. As for the content itself - it's amazing idea. Camera loves both of you. You should do more of those.
9:00 @MM Have you used Franklin Sensors stud finders on rock lath or lath and plaster? I’ve heard they only work really well on drywall. I have a Bosch GMS120 Wall Scanner, and it has worked really well for finding wood/metal/wires behind drywall, rock lathe, wood shingles, etc., but I’ve been wanting to try a Franklin Sensors since I’ve heard they’re the best stud finders.
1:39:00 @MM Klein has a couple 3 plane laser levels now. I just picked up their 93CPLG rechargeable green laser level. It’s usually $160, but I got it for $130.
Was expecting a video that's funny because of how little Mrs. Maintenance knows about tools. Turns out, it's funny because of how MUCH she knows. Great video, you two!
@@JohnMcCoy I’ve rubbed off on her a little 😂👍
Really enjoy the concept of this type of video. You and Mrs. Maintenance are a great team. Keep these videos coming.
@@kevinlakeplacid appreciate it, it was fun 👍
This is awesome !!! I love this lol😂😂 y’all remind me of me & my wife lol… good stuff My man
@@hunterstark9556 👍👍. It was fun
Im legit impressed how much Mrs. Maintance knew! If i were to ask my wife shed look at me like i was speaking a foreign language 😂
@@pablorodriguez4530 😂👍👍
Joey, I enjoy your videos so much. I wish that you were closer to Madison, Ms so I could use you for some special projects as a contractor for my company. I’d love to get someone to award 75-80% of our service call business so I could focus more on the new Hospital we are doing that has to be done by March of 2026.. We would love to tee you up up getting you on board as a first call solutions provider. Anyways, as far as this video goes… I see it like this… Behind every successful man is a good woman standing beside them… More than often they are left in the shadows and many forget that and don’t give their wives or significant others the credit they are due. Great job on the content and tell your wife we enjoyed it and she did better than most as far as knowing her tools. God Bless you all!!
@@EyeOfTheTiger601 appreciate the kind words. Building a hospital I’m sure is a stressful ordeal.
I wouldn’t be able to do what I do without her… she is pretty great
@ I apologize . I should have been a bit more clear and concise…. Thank God I’m not building the entire hospital… But we are doing all the electrical. It will have 16 State of the Art Operating Rooms… 4 of them will be completely robotic other than the anesthesia along with one Doc and Surgeons observing the procedures going on in 4 fully automated rooms…. We have 7 different colors of all the conduit sized from 3/4” to 1-1/4” EMT. All the pipe 1-1/2” inches and bigger is just standard power and just silver EMT. We have purchased over 200,000 ft of 3/4” EMT alone for this project and 100,000 of it is different colors. It’s a blessing but a huge responsibility but one day at a time we are getting a little farther along everyday. Talk to me after the 200,000 ft of 3/4” has been installed and all wire pulled and terminated in one of the 184 Electrical Panels and it may be a different story if I have any hair left. Me and the boys all enjoy your videos. I hope you have a great Christmas this year and that 2025 will be your most productive year yet.
Randy G.
@@EyeOfTheTiger601 sounds like a interesting job.
Blessing to you too my friend 👍
I've missed a lot of your content lately.
Fortunately I can watch pre-recorded episodes anytime. Unfortunately "lives" are the best when watched live.
As for the content itself - it's amazing idea. Camera loves both of you. You should do more of those.
Yeah it had to be later in the day which isn’t the best for the “across the ocean” folks.
Appreciate it 👍
😂 good comedy, actually hits home
@@chewie2709 😂👍
9:00 @MM Have you used Franklin Sensors stud finders on rock lath or lath and plaster? I’ve heard they only work really well on drywall.
I have a Bosch GMS120 Wall Scanner, and it has worked really well for finding wood/metal/wires behind drywall, rock lathe, wood shingles, etc., but I’ve been wanting to try a Franklin Sensors since I’ve heard they’re the best stud finders.
@@k1_w3 they don’t work as well on double drywall, etc… so they probably don’t. I haven’t used it much on that though. I don’t run into it often
I like veto toolbags. Have just bought this one & happy
@@oldsailor9970 they make great bags
The fact that she mentioned the “spring promotion” says a lot lol
@@gasparmora5070 she has heard.. “I have to buy it, it’s the spring promotion” a couple times 😂
1:39:00 @MM Klein has a couple 3 plane laser levels now. I just picked up their 93CPLG rechargeable green laser level. It’s usually $160, but I got it for $130.
@@k1_w3 👍👍
Sorry I missed this
Was picking my Mom in law up in Austin airport
Missed it live I mean
@@THETIMINATORTHETOOLMAN 👍👍
I bought a18v Bosch bulldog SDS plus $89.
@@johnsxterra9020 that’s a good deal. They make good rotary hammers
Your tools are great with me
@@oldsailor9970 👍
If only you knew someone who knew something about HVAC to help you with your toolshed.
@@thomasbrown9402 yeah I could put in a system. I would have to run more power out there though. I only have one circuit
Sleep tight!
@@RyanJardina 👍👍
Your better half, like most women, looks suitably unimpressed and bored about her husband's hobbies 😂
@@russellham2094 😂😂
Mrs Morgan doesn’t know about the klein modbox collection 🫢
That’s channel research… a whole
Nother level of tools 😂