How to Open DeLonghi ECAM Eletta, Primadonna Class & Elite | DeLonghi ECAM Repair und Restoration

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.ย. 2024
  • Affiliate links:
    Bezahlter Link:
    U S E D P A R T S
    _________________
    Torx 20 mit Bohrung: amzn.to/41xWWiH
    Demontage Werkzeug: amzn.to/35BJM7u

ความคิดเห็น • 84

  • @coffeetricksandtips1018
    @coffeetricksandtips1018 ปีที่แล้ว

    Thx! For me very useful! I already wanted open like “old” Delonghi 😇👍🏻👍🏻👍🏻

  • @Campingglueck
    @Campingglueck ปีที่แล้ว +1

    Danke das Video hat mir sehr geholfen.

  • @matt-rx6hi
    @matt-rx6hi 6 หลายเดือนก่อน

    Hi, handy video, really helped me. Do you have a video of the thermal fuse replacement? I've opened mine up to replace but dont want to twist them too far incase i snap the mounting of them.

    • @yt.myworks
      @yt.myworks  6 หลายเดือนก่อน

      Hello, I recommend measuring the thermal fuses first, often the thermal sensor breaks instead. You can see how to open the heater housing in my other video: th-cam.com/video/dBPoXI9MenY/w-d-xo.htmlsi=qFaokipEQXXH9zIQ

  • @taowang1587
    @taowang1587 7 หลายเดือนก่อน

    Hello, my eletta is leaking in the bottom when rinsing and making coffee. There is very little water coming out from the main froth. But the water sprout works fine. Which part is possibly wrong and could I fix it by myself? Thanks!

    • @yt.myworks
      @yt.myworks  7 หลายเดือนก่อน

      Hello, is the leakage similar to this video? th-cam.com/video/dBPoXI9MenY/w-d-xo.html

  • @abishang8150
    @abishang8150 4 หลายเดือนก่อน

    Hi what special tool did you use to remove the back? Thank you

    • @abishang8150
      @abishang8150 4 หลายเดือนก่อน

      We are getting a message ‘insert tank’ even when the tank is in. Delonghi sent us a new tank (Delonghi Eletta Cappucino Top) but unfortunately the new tank didnt work. Any idea if it could be the sensor that requires replacing? We tried taking the back off but it requires a special star tool

  • @mlinchits
    @mlinchits ปีที่แล้ว

    How do you get the top cover off? There is some kind of snag in the middle. Also what could cause the grinder to grind too much coffee?

    • @yt.myworks
      @yt.myworks  ปีที่แล้ว

      As far as I can remember the cover is clipped. You can try making the coffee about ten times without coffee beans (ignore the error message), maybe it helps. If not then the power board is probably defective.

  • @Cindlou2517
    @Cindlou2517 3 ปีที่แล้ว

    Once it’s opened is it a simple fix when milk isn’t coming out hot.?

    • @yt.myworks
      @yt.myworks  3 ปีที่แล้ว +1

      I can't say that, it depends on what is broken. If the milk doesn't come at all, it is mostly the solenoid valve.

  • @jheroenb
    @jheroenb 2 ปีที่แล้ว

    Hello Myworks, we have the ecam 23.450 primadonna magnifica S with a milk froth problem. Already did all standard actions but it won't work still. When starting to make warm milk or cappucino the steam starts coming out while the right pressure did not reach the right level.It drips and sputters something and then slowly starts up, eventually there is enough steam, but that is too late for the preparation of cappucino.
    Replace valves, descaled, replace milk contact, new milk container already had everything.
    There are 2 valves in this machine, one at the bottom on the side and one behind the horseshoe shaped heating element; Could it be something with lime in there that is causing this?

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      Both solenoids need to be working properly, but I would replace the one on the bottom of the machine first. th-cam.com/video/dTTbafGlvVw/w-d-xo.html

  • @blingblong9762
    @blingblong9762 5 หลายเดือนก่อน

    Hi, my eletta cappuccino no longer displays the "fill tank" message. I thought it might be worth replacing the water tank, but i just checked and the float moves freely. What do you think?
    Annoyingly as a result I can't clear the descale message because the descale program never ends due to not recognising an empty tank.

    • @yt.myworks
      @yt.myworks  5 หลายเดือนก่อน +1

      Hello, if the magnet loses its strength, then the electronics will not detect when the water tank is empty. I therefore recommend buying a new tank.

    • @blingblong9762
      @blingblong9762 5 หลายเดือนก่อน

      @yt.myworks thank you for the quick reply! I stuck a small magnet that I found on my fridge to the bottom of the float and the issue is resolved 😂

  • @MaxEcologiePratique
    @MaxEcologiePratique 2 ปีที่แล้ว

    hello, after one week, my Eletta has a "general alarm" problem, the infuser stuck in down position. I need to move up the transmission manually to remove the error. Do you know if it is the microswitch motor issue?

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      @Mon Ecologie, Mes Economies I think the transmission has worn out and is too loose. In this case the machine cannot find the home position. The microswitches rarely break. You can tell that the transmission is too loose by moving the infuser up and down. Here is my other video on this problem: th-cam.com/video/HZ8oQUGtPjc/w-d-xo.html

    • @MaxEcologiePratique
      @MaxEcologiePratique 2 ปีที่แล้ว

      @@yt.myworks thanks but the transmission seems good (not loose), i change all the switchs but the general alarm still appear, i do not understand anything on this machine!

    • @MaxEcologiePratique
      @MaxEcologiePratique 2 ปีที่แล้ว

      Finally i have stalled the plastic slider cam and now it seems to work... I will continue to test.

  • @paulhiggins3736
    @paulhiggins3736 ปีที่แล้ว

    What screw bit are you using as I can’t get anything to fit mine to take the back off

    • @yt.myworks
      @yt.myworks  ปีที่แล้ว

      There is a special bit for the screws, but you can try a small flat head screwdriver.
      amzn.to/41xWWiH

  • @vinceaiossa9565
    @vinceaiossa9565 8 หลายเดือนก่อน

    How do you take the top off? Need to get to the grinder

    • @yt.myworks
      @yt.myworks  8 หลายเดือนก่อน

      Hello, see my other video in which a similar model is disassembled: th-cam.com/video/dBPoXI9MenY/w-d-xo.htmlsi=KzJPTFzNNx45vxGn

  • @silviumara10
    @silviumara10 2 ปีที่แล้ว

    Howdy. Can you tell me why me delonghi eletta plus ECAM 44.620 S espresso machine no longer reads my water tank when it is inserted in the device? Thanks

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      It could be that the micro switch is not working properly. Sometimes the bracket inside the machine breaks. The micro switch can be seen at min 2:30 on the left next to the power button. A white piece with two wires plugged in.

    • @silviumara10
      @silviumara10 2 ปีที่แล้ว +1

      I'll open the device and see if that part is broken. Thank you for your answer.

  • @petrvodak75
    @petrvodak75 4 ปีที่แล้ว

    Thx thx thx good job !!!!

  • @huseyintoprak3016
    @huseyintoprak3016 7 หลายเดือนก่อน

    Delonghi ecam 65655 ms prima donna elite kahve makinem kahve vermiyor ve durulama suyu akmıyor. Ne yapabilirim

    • @yt.myworks
      @yt.myworks  7 หลายเดือนก่อน

      I don't know what water quality you have in your area, but with this mistake, the water pipes are usually clogged with limescale. Most of the time, the water pipe that emanates from the heater becomes clogged.

  • @moo6247
    @moo6247 ปีที่แล้ว

    great video , thank you. can you reset the counter for replaced filters, coffees made etc ?

  • @MaxEcologiePratique
    @MaxEcologiePratique 2 ปีที่แล้ว

    Hello, my Eletta machine asks me to descale all the time, he nevers ends the descalling. All the other functions are working properly. Do tout know why? Thanks

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      Hi, how much time passes after descaling before the request comes again? Or does the prompt persist after descaling?

    • @MaxEcologiePratique
      @MaxEcologiePratique 2 ปีที่แล้ว

      @@yt.myworks the descalling process nevers end. It asks indefinitely to fill the water tank.

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      Most of the time, the problem is with the water tank when the magnet gets stuck inside. You have to make sure that the magnet slides all the way down as soon as the water tank is empty. Sometimes it helps if you tap on the water tank so that the magnet moves.

    • @MaxEcologiePratique
      @MaxEcologiePratique 2 ปีที่แล้ว

      @@yt.myworks no it is another problem. The actual magnet is working fine.

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      I still recommend trying out a different tank before disassembling the machine. Does the pump draw in air after the water tank is empty or does it stop before?

  • @celtsrhere
    @celtsrhere 2 ปีที่แล้ว

    What bit are you using in your screwdriver

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว +1

      Torx TX 20 with bore hole

    • @celtsrhere
      @celtsrhere 2 ปีที่แล้ว

      @@yt.myworks sorry, i'm an idiot! i found your link to the Torx driver. How do I replace the frother unit?

  • @macieyer5031
    @macieyer5031 2 ปีที่แล้ว

    Czy mozna prosic o instruktaz czysczenia młynka w tym modelu? Utkwilo mi ziarno i nie wiem jak to oczyszcic:)

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      To też jest model ECAM czyli młynek jest prawie taki sam jak w moim innym video: th-cam.com/video/Dk8_id4x7E4/w-d-xo.html . Zwróć uwagę na wszystkie szczegóły. Uwaga: Lewy gwint śruby!

  • @udoschillmann7848
    @udoschillmann7848 4 ปีที่แล้ว

    Hallo,super Video.Wie bekommt man bei der Maschine den Deckel ab?

    • @yt.myworks
      @yt.myworks  4 ปีที่แล้ว

      Hallo, das weiß ich jetzt nicht mehr genau aber im vorderen Teil müssten noch zwei Schrauben drin sein. Der Rest ist drauf geklipst. Grüße

  • @celtsrhere
    @celtsrhere 2 ปีที่แล้ว

    Hi Can you tell me how to replace the tap on this machine?

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      @Paul McBride on the inside of the front panel are three screws. From the front there is a plastic cap that has to be pulled off upwards. This applies to the "Eletta plus" model, which one do you have?

    • @celtsrhere
      @celtsrhere 2 ปีที่แล้ว +1

      @@yt.myworks the exact model that's in your video

  • @ashleywright7940
    @ashleywright7940 2 ปีที่แล้ว

    Hello, my eletta machine keeps giving me the message 'water circuit empty fill water circuit'. Whenever I press ok to fill, water comes out of the spout but the loading bar doesn't move and the message remains. Its stuck in this cycle I can't press any other buttons. Any suggestions? Thanks

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      I think the machine is calcified and clogged. You can try adding the descaler in the water tank and pressing the rinse button and repeating this process every few minutes. Maybe it will be free again after 1-2 hours.

    • @ashleywright7940
      @ashleywright7940 2 ปีที่แล้ว

      @@yt.myworks Hi, thanks for your advice. I opened the machine and cleaned the pipes. When I put it back together I managed to get to the descale program. I descaled twice and it was fine. Now the error message has returned after 2 weeks. Any other suggestions ?

    • @ashleywright7940
      @ashleywright7940 2 ปีที่แล้ว

      @@yt.myworks could it be the flow meter needs replacing?

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      @@ashleywright7940 try a new water pump, it might help. You can also repair the pump by installing a new seal. See my other video: th-cam.com/video/9p65d-Mrnwc/w-d-xo.html

  • @MariuszHryszkiewicz-zf9yb
    @MariuszHryszkiewicz-zf9yb ปีที่แล้ว

    Witam.Macie może instrukcję jak rozebrać ECAM 650.85MS boczki zdjąłem ale ciężko z górą,nie chcę czegoś połamać

    • @yt.myworks
      @yt.myworks  ปีที่แล้ว

      Część, odkręcić trzeba najpierw panel sterujący. Pod panelem też są co najmniej dwie następne śruby. Tak samo i z tyłu. Reszta trzyma sie na zatrzaskach.

    • @adamtaxi141
      @adamtaxi141 8 หลายเดือนก่อน

      Jak odkręcić panel sterujący. Stanąłem w tym miejscu ?

    • @adamtaxi141
      @adamtaxi141 8 หลายเดือนก่อน

      Mariusz wiesz może jak ten panel sterujący odkręcić?

  • @Muraschid
    @Muraschid 2 ปีที่แล้ว

    Jak zdemontować obudowę w de'longhi primadonna class ecam 550.75.ms ?
    Chodzi mi o te skośne boki.
    Tył obudowy odkręcony, chciałem zdemontować lewą część obudowy. Do pewnego momentu dało się otworzyć.

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว +1

      Rozbierałem ten model Delonghi dość dawno tak że dokładnie już nie pamiętam. Ale jak widać na zdjęciu z tego elementu jest montowany na chaczykach.
      www.juraprofi.de/DeLonghi-Ersatzteile/Gehaeuseteile/Frontblende-links-silber-DeLonghi-PrimaDonna-Class-Vollautomat::18873.html?refID=gbase&gclid=CjwKCAjw-8qVBhANEiwAfjXLrlLCG_DAc8rxtBrp-7XmoTjdiJpjFIS8LrhexAo27mZ8UkzRWsICHBoCA6MQAvD_BwE

    • @Muraschid
      @Muraschid 2 ปีที่แล้ว

      @@yt.myworks dokładnie właśnie o ten element chodzi, bez niego nie da się otworzyć lewej części obudowy. Domyśliłem się że jest to pewnie też na jakiś zaczepach, ale boję się na siłę podważać żeby mi to nie pękło. Mój problem z ekspresem polega na tym że jak opróżniam pojemnik na fusy, to z lewej strony na blacie kuchennym pojawia się woda, taki powiedzmy kieliszek. Domyślam się co może być przyczyną, bo widziałem parę filmików na TH-cam gdzie ludzie mieli dokładnie ten sam problem. Tylko że ja mam problem ze zdemontowaniem lewej strony obudowy.

    • @Muraschid
      @Muraschid 2 ปีที่แล้ว

      @@yt.myworks Mam pytanie, a można gdzieś ten element kupić w polskim sklepie internetowym?
      Gdybym miał na zapasie ten element, to wtedy byłaby zupełnie inna sprawa.

    • @yt.myworks
      @yt.myworks  2 ปีที่แล้ว

      Na drugim obrazku z linku który wysłałem widać zaczepy. Musisz popróbować a napewno uda ci się otworzyć. Cieknie zapewni z komory bojlera w tym przypadku należy wyczyścić i uszczelnić.

    • @Muraschid
      @Muraschid 2 ปีที่แล้ว

      @@yt.myworks Możesz mi powiedzieć Jak wygląda w tym modelu ten bojler, i czym uszczelnić? Będę bardzo wdzięczny

  • @elysterzerrudo7564
    @elysterzerrudo7564 7 หลายเดือนก่อน

    How to fix blank monitor display?

    • @yt.myworks
      @yt.myworks  7 หลายเดือนก่อน

      Sorry, I don't know what happened either, did you have a power outage? Maybe the power supply is broken.

    • @elysterzerrudo7564
      @elysterzerrudo7564 7 หลายเดือนก่อน

      It's functioning, but the problem is, the display monitor is blank.

    • @yt.myworks
      @yt.myworks  7 หลายเดือนก่อน

      @@elysterzerrudo7564 Can you still make a coffee with the sensor button?

    • @elysterzerrudo7564
      @elysterzerrudo7564 7 หลายเดือนก่อน

      @@yt.myworks Yes

    • @elysterzerrudo7564
      @elysterzerrudo7564 7 หลายเดือนก่อน

      What's the problem?

  • @elysterzerrudo7564
    @elysterzerrudo7564 7 หลายเดือนก่อน

    How to fix blank monitor problem?

    • @yt.myworks
      @yt.myworks  7 หลายเดือนก่อน

      Sorry, I don't know what happened either, did you have a power outage? Maybe the power supply is broken.