I have a L3010 and it makes a loud grinding sound when I put in the clutch... what do you think it is? Also, is there a part two? Also, I noticed you didn't have to take off the fenders!
Sounds likemaybe the throw out bearing, you'll have to do a clutch job. No, you don't have to remove the fenders, Judy the floor plate. It's been a couple years now since I be done it so I'm starting to forget. Put in a heavy duty metallic (copper sintered), you won't be sorry.
At one point after putting more fluid in it , did get the bushog and bucket up but after putting them back down I don't have any Hyd at all will not do anything except it will run
Hard to say,the pump is on the motor and that runs the steering too. Did it get very low on fluid? Maybe try cracking the high pressure line with a wrench to see if you get fluid leaking out?
Stuck?or the tractor won't move in gear? Some tractors have a break away sleeve to keep from breaking gearsif to much torque is applied. Not sure if the kubota does or not but I've had it happen in anther brand. Or the clutch is totally gone,was there any warming?
Elliana Rose Blackberry Farm nothing was wrong smh somewhere the high low got slipped out but the lever didn’t move. I had previously moved it but I guess it fell back between high and low basically leaving it in neutral. Went they everything one last time and realized it wasn’t engaged. Feel like a dope!
Thanks for taking my question. I’m getting ready to do the same thing.. can I ask how long the tear down took, and total time to complete? Mine started making a noise in 4 and 8 gear.. then the clutch went. Thank you, Dan
@@Freefamable Thank you so much for the quick response! I appreciate it! I’ve got to get into the transmission too. I think I have a clutch pack going bad. I sure do appreciate you!! Have a wonderful day! Dan. Starting today.
I lost forward reverse, have it split behind the transmission. No input from the engine side. Have all function from rear side. Is there a planetary gear past the clutch running each out put shaft or one shaft to just multiple gears ? No shaving or broke parts at the inspection lid on top of the transmission. A little bit of tiny pieces. Pto was grinding gonna fix it while down. Any ideas ?
Not sure of your question, but no planetary great set. The f-r section comes after the 4 speed section with the hi-lo last. There's a coupling but it says nothing of it being a shear point. Sounds maybe its something in the shuttle linkage? Are you at the hi low section? Sounds like you need to move into the transmission section. My manual is a PDF copy and its not very clear in the pictures. It would be great to see a full video of the trans and mid section breakdown.
@@douglasrFord there are shaft couplings between the 4 speed box,the f/r section and the hi/lo. The factory book doesn't say if they are breakaway (shear) couplings or not, some manufacturers use them to limit damage from over torque,I don't know if kubota does this,the book doesn't say. Sorry that's all I know.
My clutch is engaging at the very end of the throw. Assuming my drive clutch is about burnt up? Its a Kubota L2650 w/ dual clutch. Any input would be helpful, Thanks!
Great video brother. I was wondering if you answer a question for me? I have the same tractor, and a week ago it started making a noise in 4 and 8 gear, even if I’m at a standstill, both 4 wheel and 2 whelk drive. They are picking my tractor up tomorrow to diagnose. The clutch is not slipping on either one? Can that clutch be bad and still operate, I’m going up incline and no problems. Thank you for considering my question. I have a brain injury and sometimes don’t understand real well.
My L3600 GST transmission is stuck in 4th.
I've lost steering and the drive know controle
I have a L3010 and it makes a loud grinding sound when I put in the clutch... what do you think it is? Also, is there a part two? Also, I noticed you didn't have to take off the fenders!
Sounds likemaybe the throw out bearing, you'll have to do a clutch job. No, you don't have to remove the fenders, Judy the floor plate. It's been a couple years now since I be done it so I'm starting to forget. Put in a heavy duty metallic (copper sintered), you won't be sorry.
Any body??? I'm stuck.i cant even get the floorboard off the tractor.hello? Any1
What are you attempting?
At one point after putting more fluid in it , did get the bushog and bucket up but after putting them back down I don't have any Hyd at all will not do anything except it will run
Hard to say,the pump is on the motor and that runs the steering too. Did it get very low on fluid? Maybe try cracking the high pressure line with a wrench to see if you get fluid leaking out?
Thanks! I have a L2900 and it seems to be stuck in neutral, any thoughts there?
Stuck?or the tractor won't move in gear? Some tractors have a break away sleeve to keep from breaking gearsif to much torque is applied. Not sure if the kubota does or not but I've had it happen in anther brand. Or the clutch is totally gone,was there any warming?
Elliana Rose Blackberry Farm nothing was wrong smh somewhere the high low got slipped out but the lever didn’t move. I had previously moved it but I guess it fell back between high and low basically leaving it in neutral. Went they everything one last time and realized it wasn’t engaged. Feel like a dope!
Thanks for taking my question. I’m getting ready to do the same thing.. can I ask how long the tear down took, and total time to complete? Mine started making a noise in 4 and 8 gear.. then the clutch went.
Thank you,
Dan
2 days if you have the parts, maybe one day if your real good
@@Freefamable Thank you so much for the quick response! I appreciate it!
I’ve got to get into the transmission too. I think I have a clutch pack going bad.
I sure do appreciate you!!
Have a wonderful day!
Dan. Starting today.
Thank you so much,your awesome
where did you get the clutch and the manual?
I lost forward reverse, have it split behind the transmission. No input from the engine side. Have all function from rear side. Is there a planetary gear past the clutch running each out put shaft or one shaft to just multiple gears ? No shaving or broke parts at the inspection lid on top of the transmission. A little bit of tiny pieces. Pto was grinding gonna fix it while down. Any ideas ?
I'll look at my manual to see. Some tractors have a breakaway coupling to keep from damaging the axle,I wonder if that could be it?
Not sure of your question, but no planetary great set. The f-r section comes after the 4 speed section with the hi-lo last. There's a coupling but it says nothing of it being a shear point. Sounds maybe its something in the shuttle linkage? Are you at the hi low section? Sounds like you need to move into the transmission section. My manual is a PDF copy and its not very clear in the pictures. It would be great to see a full video of the trans and mid section breakdown.
@@Freefamable hey thanks. Where is the break away ?
@@douglasrFord there are shaft couplings between the 4 speed box,the f/r section and the hi/lo. The factory book doesn't say if they are breakaway (shear) couplings or not, some manufacturers use them to limit damage from over torque,I don't know if kubota does this,the book doesn't say. Sorry that's all I know.
My clutch is engaging at the very end of the throw. Assuming my drive clutch is about burnt up? Its a Kubota L2650 w/ dual clutch. Any input would be helpful, Thanks!
If its not slipping it sounds like adjustment. If it has a lot of hours since reclutch it's likely gonna need one,lucky to get 1000hrs on a clutch.
@@Freefamable Yeah my tractor has 1300 hours on it. The clutch engagement is like an on and off switch. not very good but not slipping.
@@RaztechPowersports it's going to need one soon with 1300 hrs.
Elliana Rose Blackberry Farm and the fun begins lol. Thanks for the input 🤙🏻
Thank thank thank you sir.
Great video brother. I was wondering if you answer a question for me? I have the same tractor, and a week ago it started making a noise in 4 and 8 gear, even if I’m at a standstill, both 4 wheel and 2 whelk drive. They are picking my tractor up tomorrow to diagnose.
The clutch is not slipping on either one? Can that clutch be bad and still operate, I’m going up incline and no problems. Thank you for considering my question. I have a brain injury and sometimes don’t understand real well.
hola .amigo tengo el mismo tractor y necesito un motor igual donde lo puedo conseguir ? gracias